The Belltec H350 auger drive for backhoes and excavators is the highest flow unit of three models of the Belltec H Series Drives, the top of the line of Belltec’s basic drives which include the NC Series hydraulic drives and the the popular M Series digger drives. Belltec H Series hydraulic auger drives feature Belltec quality hydraulic drive motor and unsurpassed gearboxes.
For added protection to the gearbox for extra heavy duty applications such as drilling rock where there is a chance that the auger may bind, causing torque stress to the drive unit, Belltec outfits as standard equipment a Shear Flange with every unit. Soft bolts will shear when needed, protecting the drive.
The H Series Drives are exceeded by Belltec’s HTLS series for heavier excavators, higher flows and pressures, and where even more torque is necessary for high production drilling, solid rock drilling and more.
Belltec Hydraulic Planetary Auger Drive
The Belltec H-series is available in three models for heavy duty work. These units have a bolt-on flange for protection of the gear unit.
MODEL H-350 2.5″ ROUND or 2″ HEX
Maximum Output Torque 3000 ft-lbs Recommended Fluid Flow 20-35 gpm Maximum Pressure-Continuous 3000 psi Recommended Max Auger Dia-Dirt 36 in Output Shaft 2.5″ Round & 2″ Hex
|Maximum Output Torque||3000 ft-lbs|
|Recommended Fluid Flow||20-35 gpm|
|Maximum Pressure-Continuous||3000 psi|
|Recommended Max Auger Dia-Dirt||36 in|
|Output Shaft 2.5″ Round & 2″ Hex|