Showing all 9 results

– Substantially larger cutting capacity.
– Ability for 45 degree angle miter cut.
– Saw Type: Tile and Stone
– Motor Type: Induction
– Cutting Depth: 2-5/8″
– Rip: 37″, Diagonal: 26″
$1,435.00
– 1.5 HP Induction Motor
– Bridge saw for small-scale stone projects
– Ability for 45 degree angle miter cut
– Saw Type: Tile and Stone
– Cutting Depth: 2-5/8″
– Rip: 27″, Diagonal: 19″
– 125 lbs
$1,079.00
– Induction Motors for quieter performance
– 2 HP Motor and stainless steel water tray
– Saw Type: Tile
– Motor Type: Induction
– Cutting Depth: 3.5″
– Rip: 20″
– 115lbs
$901.00
– Substantially larger cutting capacity.
– Ability for 45 degree angle miter cut.
– Saw Type: Masonry, heavier duty
– Motor Type: Carbon Brush
– Cutting Depth: 5″
– Camlock Blade, adjustable table
– Use as Chop Saw
– 75lbs
$835.00
– Induction Motors for quiet performance
– 1.5 HP Motor and polypropylene tray
– Saw Type: Tile
– Motor Type: Induction; 3200 RPM
– Cutting Depth: 3.5″
– Rip: 20″; Diagonal: 14″
– 98lbs
$823.00
– Carbon Brush Motor 1HP
– Water pump for liquid cooled Bearing Housing
– Saw Type: 7″ dia. Blade
– Motor Type: Carbon Brush; 6000 RPM
– Larger Cutting Table
– Cutting Depth: 1-3/4″
– Rip: 20″; Diagonal: 14″
– 55lbs
$640.00
– Carbon Brush Motor
-1 HP Motor and polypropylene tray.
– Motor 115 V/60 Hz
– 7″xa0General Purpose Wet Tile Blades
– Rip: 17″, Diagonal 12″
– Blade Depth 1-3/4 in
– ABS Water Tray and LCBH Equipped
– 43 lbs

xa0

$559.00
– Carbon Brush Motors for more Torque and lower cost
– 1.5 HP Motor and polypropylene tray.
– Saw Type: 7″ dia. Blade
– Motor Type: Carbon Brush
– Cutting Depth: 1 3/4″
– Rip: 17″, Diagonal 12″
– 35 lbs
$398.00
– Carbon Brush Motorxa0
– Saw Type: Tile
– Motor Type: Carbon Brush; 10,000 RPM
– Cutting Depth: 1-5/8″
– Powerful Carbon Brush Motor
– Cutting depth adjusted with single wing screw
– Cutting depths up to 1-5/8″
– 6.4 lbs
$165.00