|
|
|
|
|
|
|
|
Home > Categories > Heaters > Flameless Heater Trailer |
|
| |
|
|
|
|
| |
Flameless 600k and 1 Million BTU Diesel Heater Trailers
|
|
|
|
|
|
|
|
|
|
|
These Flameless Heat Generating Unit for Oil Rigs and other demanding applications is a highly efficient and extremely safe alternative for the production of large volumes of heat. In short, it is a trailer that is a heater - The ThermDynamics people have dedicated a Caterpiller or Detroit engine to produce heat only. They have converted the output torque to heat and captured all the other sources of heat - from the heads, exhaust, cooling system - and made a totally flameless and sparkless heater that complies with OSHA regulations on oil fields and other applications.
The patented technology uses diesel power to agitate hydraulic oil in a flameless, sparkless, low-pressure environment to deliver 600K+BTU’s at a maximum of 160° F and 6200 CFT per minute. The oil is cooled and circulated, not burned, providing a clean pollution free discharge to the target environment. A direct drive from the diesel engine powers both the patented unit and the integrated fan to dissipate the heat from the Model 600DR heat exchanger. Heat output is controlled by simple settings on the diesel engine throttle allowing selection of heat the preferred heat level. The unit incorporates all controls necessary to ensure safe operation and equipment protection. The Model 600D is provides the only flameless, safe heating trailer unit today for oil rigs and other demanding applications.
The patented heat generating units has a sealed, stationary housing enclosing a single piece-rotating disc. The disc is driven by a splinted shaft, which is coupled, directly to the diesel engine. The heating system is a closed loop. Heater fluid is heated by disc agitation and transported to the unit heat exchanger where heat transfer occurs. As the heated fluid is cooled, it is transported to an expansion tank where it is available for re-use and the process is repeated. In order to maximize the efficiency of the Model 600DR, the diesel exhaust is routed through the heat exchanger compartment prior to being discharged well away from the work area. Clean heated air can be delivered directly from the unit’s discharge or through attachable flex ducting.
Given the flameless and sparkless nature of the technology, the unit is ideal for construction sites, fuel farms, mines, airports and anywhere else fire is of concern. The heat generator and engine are enclosed in a locked cabinet complete with floor and removable doors. The unit is mounted on a single, 5300 lb. torsion-bar axle with 15" wheels and tires. Due to the few moving parts, the potential for failure is minimal. The Model 600DR is designed for stand alone, 24-hour trouble free operation. See also additional information.
|
Details and Accessories
|
|
600K BTU Flameless, Sparkless Diesel Heater Trailer - THERM-600DR |
|
|
|
- Caterpiller 6.6 litre Diesel Powered; No generator or elec power needed.
- Pulls right up to a rig without OSHA setbacks
- 600K BTU/hr; >6,000 CFM; 160º F Exit Temp
- 15" Wheels; 5300 lb Torsion Bar Axle, 16" Duct Storage Area
- Skid Mounted Available, same price.
- 14'L x 5'W x 7' Tall; 3,565 lbs, Requires Operation Training
- Unit is in very HIGH demand. Call now! |
|
|
|
|
|
|
|
|
|
|
|
Details and Accessories
|
|
1+Mil BTU Flameless, Sparkless Diesel Heater Trailer - THERM-900DR |
|
|
|
- Caterpiller 6.6 litre Diesel Powered; No generator or elec power needed.
- Pulls right up to a rig without OSHA setbacks
- 1+ Million BTU/hr; >6,000 CFM; 160º F Exit Temp
- 15" Wheels; 5300 lb Torsion Bar Axle, 16" Duct Storage Area
- Skid Mounted Available, same price.
- 14'L x 5'W x 7' Tall; 3,565 lbs, Requires Operation Training
- Unit is in very HIGH demand. Call now! |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Heat Generating Unit
THERM-600DR: Maximum Output: 600,000+ BTU
THERM-900DR Maximum Output: 1,000,000+ BTU
Maximum of 160° F outputs
Trailer Dimensions:
Cabinet Length: 9'2"
Overall Length: 14'0"
Overall Height: 5'0"
Width: 5'0"
Weight:
Fueled: 4,600 lbs
Empty: 3,500 lbs
Engine:
Caterpillar Model 3056E
6 cyl, 4 cycle, in-line water cooled
Displacement: 365 in3
Power Output: 170 hp.
Fuel Consumption: 8.0 US Gal. P/h
#2 fuel (at max output)
Protection: Auto fuel cutout for low oil pressure, high engine or heat unit temperatures, explosion proof alternator and auto shutdown valve.
Starting: Key switched 12v, starter with integrated cold weather assist.
Controls and Gauges:
Engine; Electronic Throttle, key starter, tachometer/hour meter, voltmeter
Heat Genertor; Fluid Pressure Gauge, Fluid Temperature Gauge
Capacities:
engine oil: 10 US Qts.
Fuel: 170 US Gal.
Hydraulic Fluid: 2.5 USg. (approx.)
Trailer:
5200 lb. Torflex Axle
15" Radial Tires - ST225/75R15
electric brakes
Adjustable hitch
Lights, jack, safety chain
Ducts:
(2) 16" outlets
Ducting Available
Duct storage in trailer compartment
|
|
| |
|
|
|
|
|
|
|
|
|
Equipment for:
Construction:
Farm:
Other:
|
|
|
|
|
|
