No Sales Tax!
 
EQUIPMENTLAND.com
Contact equipmentland.com
 
   attachments, implements and tools for construction, farm and home
 
  

scart
qcart
specials
warranty
policies
contact
parts

   

FEMA Member
Locator Dept.

 Home > Categories > Concrete Tools > Concrete Mixers, Concrete Buckets, Concrete Placers
     

Concrete Mixers, Concrete Buckets, Concrete Placers

Concrete Mixing Bucket
for 1600 lb skid steers and up

9 cuft - 1/3 cuyd. capacity
Max coarsee Ag. - 3/4"
Reversible revolving paddles
50"W x 35" H x 30" D
Weight: 750 lbs.

$5,990+ s/h

  Related: SkidSteers / Rock Picking / Mount Kits / Grapple Fork
Rock Bucket 6 ft
Mixer Type – Rotating Drum
Hyd. Requirements - 8 to 10 GPM
Capacity – 6 cuft
Empty Weight - 255 lb

$2,790 + s/h

  Related: SkidSteers / Rock Picking / Mount Kits / Grapple Fork

Concrete Mixing bucket

Concrete Mixing Bucket

The new Skid-Steer Concrete Mixer combines the advantages of a loader and a concrete mixer into one piece of equipment that provides the most efficient and economical way to produce small quantities of thoroughly mixed concrete, transport it to often "difficult to reach" pour sites, and then put it in place. Rotate the mixer into a bucket loading position. The design of the new Scoop-N-Mix permits the skid-steer's tilt cylinders to rotate the mixer into a bucket loading position.  This allows sand and gravel for the mix to be scooped up, as with a loader bucket, eliminating the back-breaking labor of loading by hand.

Rotate the mixer to its upright mixing position. The tilt cylinders then rotate the mixer to its upright mixing position where bags of cement are broken into the mixer using the built-in bag splitter.  Water is then added and within a few short minutes concrete is ready for placement. Discharge Concrete. Concrete can be discharged in one of two ways through a mechanical lift gate on the side of the mixer and down a chute, or by simply tilting the mixer down with the tilt cylinders and discharging out the top.  Either way, the speed and quantity of discharge can be easily controlled. THE NEW SCOOP-N-MIX... • is the fastest and most economical way to produce small volumes of good quality concrete.

We are all aware that ready-mix companies don't want to deliver less than full truckloads of concrete, and even if you can get small quantities delivered, you will pay a much higher price and will probably be the last on the delivery list.  With the Scoop-N-Mix and your skid-steer, you can  produce good quality concrete within minutes and without the back  breaking labor of hand loading a mixer.  You will have concrete when you need it, where you need it, and at a very economical cost.

The Scoop-N-Mix features a new improved design. This new design incorporates a revolving paddle mixing action, a system far superior to augers when it comes to producing quality, well mixed concrete.  The revolving paddles are driven by a strong hydraulic motor thru a dependable chain and sprocket drive.  The hydraulic motor is powered by the auxiliary hydraulics of the skid-steer.  The standard auxiliary hydraulic kit on most skid-steers is very adequate - high flow kit is not required.  The chain and sprocket drive takes the shock-load off the hydraulic motor, eliminating most any chance of damage to the motor, thus greatly extending hydraulic motor life.  Neoprene pads protect paddles and are adjustable and reversible for longer life.  "Abrasion Resistant" steel drum shell construction provides long drum life.

Concrete Mixing and Placment Bucket

Concrete Mixer and PlacerPut this on your skid-steer and you have both a concrete mixer and a placer, all in one. It is the easily affordable way to mix small volumes of concrete and then place it anywhere it is needed.   Today getting a cubic yard or less from a ready mix company is almost impossible, and if they will deliver it, you can bet the cost will be 3 to 5 times the normal yardage price.  Also, as you know, wheeling concrete is very costly, slow, and labor intensive.  With the Mix-N-Place you can mix the quantity you need, have it when you need it, place it where it is needed, and keep the cost reasonable.

The six cubic foot capacity is perfectly matched for the majority of skid-steer loaders.  The Mix-N-Place is simple in design, but is built rugged so it will be dependable.  The mixer is powered by a strong hydraulic motor that mounts to an extra heavy duty carrier bearing which carries the load and protects the hydraulic motor and seals.  A heavy duty universal skid-steer quick-tach along with 3/8” plate mounting components ensure it will stand up on any job, and even withstand the toughest of rental conditions.  The Mix-N-Place is supplied complete with hydraulic hoses, just install your quick-disconnects, connect to your skid-steer’s auxiliary hydraulics and you are ready to mix and place concrete.


Equipmentland can be your source for our listings and others. Try the Equipmentland Locator.  
Equipmentland.com
HOME   |   ORDERING HELP   |   WARRANTY   |    PARTS   |   POLICIES   |   CONTACT US
 
Copyright 2008 EQUIPMENTLAND.com - All Rights Reserved