Swing Hoe Trench Digger

The Swing Hoe Trench Digger's are strong, hydraulically-controlled boom swings that swing a full 110 degrees. This allows operators to dump and pick up material on either side of the trench without maneuvering the skid-steer from side to side as is required with rigid, mini-backhoe attachments. That means minimal turf scuffing.

The Swing Hoe™ Trench Digger has two important advantages over more expensive, self-contained skid-steer backhoe attachments. You never have to leave the operator's seat of the skid-steer and its well-engineered design makes side stabalizers unnecessary. Simple, efficient constructions gives you the best of both worlds, saving time and money. Hydraulics are directly connected to the skid steer controls for low maintenance, and versatility like never before.

You have the power to dig deep trenches, reach high and reposition easily, all from the confortable operator's position. Swing Hoe™ digs down 6 feet, making it ideal for most landscaping or light construction trenching. Buckets available in 12:, 15" and 20" widths suit a varaitey of digging needs.

SWING HOE TRENCHER SPECIFICATIONS: Minimum Overall Length (with curled bucket) 80" (203.2 cm) Minimum Overall Length (without bucket) 70" (177.8 cm) Minimum Overall Height 22" (55.9 cm) Width of Attachment Frame 50" (127 cm) Weight (with 12" bucket) 567 lbs. (257.2 kg) Hydraulic Flow Range 10 to 30 GPM (38 to 114 LPM) You may need to contact your skid-steer loader manufacturer for recommendations regarding a relief valve, which may be needed to avoid damage to bucket cylinder rods when using backhoe attachments SwingHoe Backhoe attachment, Less bucket $3,634 + 375 s/h Extra Wire Harness for Swinghoe $72 + 30 s/h 12" Backhoe Bucket with Teeth $630+ 230 s/h 15" Backhoe Bucket with Teeth $677 + 240 s/h 18" Backhoe Bucket with Teeth $735 + 250 s/h