|
|
| |
|
|
|
Home > Categories > Edgers > Tractor drawn Edger |
|
| |
|
|
|
Tractor drawn Edger for 3-Point Hitch
The KURB DRESSER is a simple yet rugged tractor-drawn edger that is easily mounted on any category I three-point hitch. The heavy all-steel welded construction insures a long service life. The Kurb Dresser is equipped with lifetime lubricated roller bearings and bushings thus eliminating time consuming daily maintenance. Incorporated into the design is a self-sharpening 20" alloy steel disc with integral depth gauge wheel. NO BELTS, DRIVE SHAFTS, OR GEARS - the Kurb Dresser is ground driven and works efficiently at all tractor speeds. The cutter blade can be positioned to either side of the tractor to allow cutting with or against the flow of traffic. The blade mounting can compensate for up to 16 inches lateral movement, depending on the lower link design of the tractor. Curves are easily edged. Extra sharp curves are handled by simple reverse tractor motion. The simple design and easy operation of our Kurb Dresser insures that you will be edging miles and miles of curbed areas virtually maintenance free.
|
|
|
|
|
|
|
|
|
|
|
|
|
- Category I three-point hitch,
- Exclusive Non-Spinning Cutting Blade
- Lateral Travel: Up to 16".
- Walks, 4" below pavement.
- Speed 0 to 20 miles per hour.
- 68"W x 23"H; Weight 329 lbs.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
- Category I three-point hitch,
- Exclusive Non-Spinning Cutting Blade
- Lateral Travel: Up to 16".
- Walks, 4" below pavement.
- Speed 0 to 20 miles per hour.
- 68"W x 23"H; Weight 378 lbs.
|
|
|
|
|
|
|
|
|
|
|
|
.
|
|
|
|
|
|
- Set of Five; 90 lbs. Each
- 540 lbs. total
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
 
Click thumbnails for larger picture.
|
|
|
|
|
|
Specifications
Power Required: Standard tractors equipped with Category I three-point hitch.
Exclusive Non-Spinning Cutting Blade: No direct drive to blade. Rotation accomplished by soil resistance and tractor motion.
Edging Operations: Speed 0 to 20 miles per hour. Edging radii 5 feet and larger. Curb from 0" to 24" height edged from streets.
Walks, 4" below pavement.
Edging Guide: Within limit of lateral travel, concave side of cutting blade automatically follows edge of curb or walk.
Lateral Travel: Up to 16". (Depending on the tractor’s lower link design).
Gauge Wheel: Limits depth of cut to 4"
Cutting Blade: 20" diameter, made of special alloy steel, heat-treated to 38 to 45 Rockwell C.
Travel Lock: 1/2" steel locking pin permanently attached to unit with chain.
Weight Box: Holds maximum of 450 lbs.
Dimensions: Width 68", height 23". Projects from tractor lift links 15". Weight 350 lbs. |
|
|
|
|
|
The E 410 Model Asphalt Edger
This model of the Kurb Dresser incorporates both the concave disc blade for edging concrete, as well as the straight disc blade and spring-mounted scraper for edging asphalt. The scraper removes soil and grass overlaying the asphalt. The unit is excellent for users who have both concrete and asphalt to be edged.
Support Stand
Support stand is attached to all models to make storage easier and protect the bottom surface of the Kurb Dresser.
Optional Equipment
Cast Iron Weights: 90 lbs. each. Maximum of five usable. |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Equipment for:
Construction:
Farm:
Other:
|
|
|
|
|
|
