 |
 |
 |
||
 |
||||
|
|
||
|
||||||||
 General's Long Reach Air Tools work fast and easily to remove vinyl and ceramic tiles, carpet adhesives and material build-ups from floors and walls. Their small size and high power output make them useful for chipping away concrete and asphalt or removing slag and scale materials on industrial and marine job sites.
The lightweight, smaller MDF15 is ideal for above-waist and overhead projects including asbestos and acoustic tile removal. The larger, more powerful MDF35 incorporates an internal valving mechanism that allows the piston to deliver greater kinetic energy per blow. General's exclusive Tool Integrated Protection System (TIPS®) provides additional 360° support around the tool shank to help minimize receiver damage from forces created when prying. Both tools accept industry standard accessory tool shanks for unmatched versatility and cost savings. The SCP3 three piston scabbler is ideal for use in small and hard to reach areas under machines and equipment, overhead ceilings and verticle walls. The scabbling process is designed to correct errors in concrete levels and break away laitance and delaminated surfaces. Other applications include removing material build-ups and severe corrosion. The chipping action of the tungsten carbide-tipped pistons can also deliver a surface finish that promotes the proper adhesion of epoxy, polymer and similar top coatings. The center-mounted secondary handle configuration accommodates ambidextrous operation. The inline design and precise balance help minimize operator fatigue. |
||||||||
|
|
|
|
||||||
|
|
Long Reach Air tool - 55.5 inch overall length without accessory tool. Aluminum barrel construction. 3700 blows per minute frequency; 6.7 SCFM @ 90 PSI theoretical air consumption. Tool Integrated Protection System™ (TIPS™) full 360º support retainer for multiple tool use; 60 inch length, high pressure whip connecting hose; utilize industry standard .371 hexagon shank (round retainer) accessory tools. |
|
$8.00 s/h |
|||||
|
|
Long Reach Air tool - 55 .5 inch overall length without accessory tool. Steel barrel construction. 3100 blows per minute frequency; 10.7 SCFM @ 90 PSI theoretical air consumption. Tool Integrated Protection System™ (TIPS™) full 360º support retainer for multiple tool use; 60 inch length, high pressure whip connecting hose; utilize industry standard .580 hexagon shank (round retainer) accessory tools. |
|
$18.00 s/h |
|||||
|
|
Scabbler - hand held, 3 piston design with cruciform/crosscut tip configuration. 3000 blows per minute frequency; 29.6 SCFM @ 90 PSI theoretical air consumption. |
|
$13.00 s/h |
|||||
062705
|
||||||||||||||
|
