Arcotherm (Cantherm) direct and indirect-fired heaters from Equipmentland. A full line of direct fired heaters and indirect fired heaters from 100,000 BTUs to a 1.5 million BTU self-contained trailer models. Very trouble-free these heaters are commonly used by helicopter companies for emergency work and pre-heating. Construction and oil companies use them day-in, day-out with continuous use. Order early in the season.

			Cotton Canvas Ducting
			The material of choice for cold weather helicopter users, because canvas is the most durable. Dragging ducting across ice is really hard on ducting and canvas holds up better than PVC. - Standard Duct for the EC Series heaters. Also works with Jumbo Models - Metal J-Lock collars allow quick assembly and knockdown - Extra-durable cotton canvas ducting for high abrasive application.		6" x 15': $175 +30 s/h 12" x 12': $180 +30 s/h 12" Duct Tandem Connector: $50 +15 s/h

			EnviroDuct PVC Ducting
			- PVC/ Polyester VentaTex® 13oz/sq yd Fabric - Steel-wire helix/ with heavy duty wear strips, - Metal J-Lock collars available - Temperature range: -20 to 200 degrees F; -29 to 93 degrees C - Standard Pitch: 6" dia.- 3" pitch; 8", 11"- 4" pitch. - Expanded Pitch: Available on 12" diameter & larger		11"x25': $208 + $30 s/h 18"x25' : $270 + $30 s/h 20"x25': $350 + $30 s/h

			EnviroDuct Hi/Low Ducting
			- Available only from Equipmentland - Fabric reinforced thermoplastic elastomer with steel-wire helix construction - More flexible than PVC in cold weather - 25' lengths - 125' min. required - Wire rope ends for simple tandem extending. - Available in J-lock, pin-lock, or belted cuff - Temperature range: -60 to 250 degrees F; -51 to 121 degrees C - Standard Pitch: 6" & 7" dia. 3" pitch; 8" & larger 4" pitch		12" x 25': $375 +30 s/h w/ J-Lock w/ Pin-Lock w/ belted cuff

			EC Collar
			The EC Collar is provided at no charge for new EC heaters. For retrofitting existing EC heaters to accept Ducting, add this collar which necks down the EC series heaters to 12" to accept J-Lock, Pin-Lock or Belted Cuff Ducting. - With Metal J-Lock collars unless specified otherwise		$260 +30 s/h

			EC Two-Way Splitter
			- Converts 12" to two 12" ducts - Uses Canvas PVC 6" Ducting - Fabricated Sheet Metal, painted or powder coated. - With Metal J-Lock collars unless specified otherwise		$160 +30 s/h

			EC Heater Three Way Splitter
			- Converts one 12" to connect to three 6" ducts - Uses CAN6X15 Canvas Ducting, 6" x 15' - Fabricated Sheet Metal, painted or powder coated. - With Metal J-Lock collars unless specified otherwise		$175 +30 s/h

			Jumbo Reducer - 24 to 18
			- Necks down the Jumbo 24" port to accept 18" x 25' PVC Enviro Ducting - For top or side of Arcotherm Jumbo 115 or 150 heater - With Metal J-Lock collars unless specified otherwise		$260 + $30 s/h

			2-1 Jumbo 115 Splitter - 24 to two 18's
			- For top of Jumbo 115 Heater - Accepts 18x25 PVC DUCT: 18" x 25' - Order with Jumbo 115 Heater and it will come installed - Weight 12 lbs.		$350 +30 s/h

			3-1 Jumbo Splitter - 24 to three 12's
			- For side of Jumbo Heaters - Accepts 18"x25' PVC Enviro Ducting - With Metal J-Lock collars unless specified otherwise		$400 +30 s/h

			4-1 Jumbo Splitter -24 to four 11's
			- For top of Jumbo 115 and 150 heaters - Accepts 11" x 25' PVC Enviro Ducting - Order with Jumbo Heater and it will come installed - With Metal J-Lock collars unless specified otherwise		$300 +30 s/h