|
|
| |
|
|
| |
Cantherm Helicopter Heating Supplies
These heaters are rapidly becoming the heater of choice for cold-weather helicopter heating. Arcotherm heaters are used in many sizes depending on need. All heaters are indirect-fired oil, so they can be used indoors (vented to outside) or outdoors heating interior and/or exterior areas. The EC series is lightweight, robust and affordable. Tires are oversize so they can more easily be pulled through snow. Ducting, splitters and adapters are available in many configurations. From 20,000 to 650,000 BTU models.
|
|
|
|
|
|
EC Series Helicopter Heaters
|
|
|
|
|
|
|
Details and Accessories
|
|
113K BTU Indirect Fired Oil Heater - CAN-EC100 |
|
|
|
- Heat Output: 113,000
BTU
- Air Flow: 880 CFM; Heat Rise 150 deg. F.
- .81 GPH; 11.9 Gallon Tank; 110 V
- Pneumatic Tires, Fuel Gauge, Preheated fuel filter std.
- Uses 11" x 25' or 12" x 12' duct; No adapter needed
- 18" x 27" x 47"; 94 lbs.
- Optional: thermostat, tune-up kit, ducts |
|
|
|
|
|
|
|
Details and Accessories
|
|
219K BTU Indirect Fired Oil Heater - CAN-EC200 |
|
|
|
- Heat Output: 219,000
BTU
- Air Flow: 1,530 CFM; Heat Rise 150 deg. F.
- 1.56 GPH; 17.2 Gallon Tank; 110V, 60 Hz
- Pneumatic Tires, Fuel Gauge, Preheated fuel filter
-
Four loop combustion chamber.
- Ducting: can use three 6"x15"; two 12"x12" or one 14"
- Duct adapters required.
- Optional: thermostat, lift kit, tune-up kit, ducts
- 20" x 37" x
47"; Weight: 176 lbs |
|
|
|
|
|
|
|
Details and Accessories
|
|
306K BTU Indirect Fired Oil Heater - CAN-EC300 |
|
|
|
- Heat Output: 306,000
BTU
- Air Flow: 2,500 CFM
- 2.18 GPH; 27.7 Gallon Tank; 110V, 60 Hz
- Pneumatic Tires, Fuel Gauge, Preheated fuel filter
-
Four loop combustion chamber.
- Ducting: (2) 12"x12' or one 16" x 15'. adapter required
- 11.4 amp Draw, 175 deg. F heat rise
- Optional: thermostat, external tank, lift kit, tune-up kit
- 28" x 41" x 73"; Weight: 264 lbs |
|
|
|
|
|
|
|
|
|
|
|
NEW MODEL!
Details and Accessories |
|
400K BTU Indirect Fired Oil Heater - CAN-PHOEN400 |
|
|
|
- High/low heat output:
400K BTU high/ 260K BTU low
- Air Flow: 3,250 CFM; Heat Rise 165 deg. F.
- 2.85 GPH high; 1.94 GPH low; 36 Gallon Tank
- 110V, 60 Hz
- Pneumatic Tires, Fuel Gauge, Preheated fuel filter
-
Four loop combustion chamber.
- Ducting: up to 100' run. Duct adapter required.
- Optional: thermostat, external tank, lift kit, tune-up kit
- Heavy Duty Kit Option (total 507 lbs)
- 26" x 47" x 74"; Weight: 383 lbs |
|
|
|
|
|
|
|
NEW MODEL!
Details and Accessories |
|
380K BTU Indirect Fired NATURAL GAS Heater - CAN-PHOEN380N |
|
|
|
- High/low heat output:
380K BTU high/ 240K BTU low
- Air Flow: 3,250 CFM; Heat Rise 165 deg. F.
- Similar to oil fueled model shown at left
- 110V, 60 Hz
- Pneumatic Tires, Fuel Gauge, Preheated fuel filter
-
Four loop combustion chamber.
- Duct Splitter Accessories for 20", 16" and 12" ducts
- Ducting and Recirculating Duct Adapter available
- Optional: thermostat, external tank, lift kit, tune-up kit
- Shown with Heavy Duty Kit Option (total 507 lbs)
- 26" x 47" x 74"; Weight: 383 lbs |
|
|
|
|
|
|
|
|
|
EC Heater Accessories
|
|
|
|
|
|
|
|
|
EC 100 Duct Adapter |
|
|
|
The EC Collar is provided at no charge for new EC heaters. For retrofitting existing EC heaters to accept Ducting, add this collar which necks down the EC series heaters to 12" to accept J-Lock, Pin-Lock or Belted Cuff Ducting.
- With Metal J-Lock collars unless specified otherwise |
|
|
|
|
|
|
|
|
|
EC 200 Duct Adapter |
|
|
|
The EC Collar is provided at no charge for new EC heaters. For retrofitting existing EC heaters to accept Ducting, add this collar which necks down the EC series heaters to 12" to accept J-Lock, Pin-Lock or Belted Cuff Ducting.
- With Metal J-Lock collars unless specified otherwise |
|
|
|
|
|
|
|
|
|
EC 300 Duct Adapter |
|
|
|
The EC Collar is provided at no charge for new EC heaters. For retrofitting existing EC heaters to accept Ducting, add this collar which necks down the EC series heaters to 12" to accept J-Lock, Pin-Lock or Belted Cuff Ducting.
- With Metal J-Lock collars unless specified otherwise |
|
|
|
|
|
|
|
|
|
EC 400 Duct Adapter |
|
|
|
The EC Collar is provided at no charge for new EC heaters. For retrofitting existing EC heaters to accept Ducting, add this collar which necks down the EC series heaters to 12" to accept J-Lock, Pin-Lock or Belted Cuff Ducting.
- With Metal J-Lock collars unless specified otherwise |
|
|
|
|
|
|
|
|
|
EC200 2-1 Two-Way Splitter |
|
|
|
- Converts 12" to two 12" ducts
- Uses Canvas or PVC Ducting
- Fabricated Sheet Metal, painted or powder coated.
- With Metal J-Lock collars unless specified otherwise
|
|
|
|
|
|
|
|
|
|
EC300 2-1 Two-Way Splitter |
|
|
|
- Converts 12" to two 12" ducts
- Uses Canvas or PVC Ducting
- Fabricated Sheet Metal, painted or powder coated. - With Metal
J-Lock collars unless specified otherwise
|
|
|
|
|
|
|
|
|
|
EC400 2-1 Two-Way Splitter |
|
|
|
- Converts 12" to two 12" ducts
- Uses Canvas or PVC Ducting
- Fabricated Sheet Metal, painted or powder coated.
- With Metal J-Lock collars unless specified otherwise
|
|
|
|
|
|
|
|
|
|
EC200 3-1 Heater Three Way Splitter |
|
|
|
- Converts one 12" to connect to
three 6" ducts
- Uses CAN6X15 Canvas Ducting, 6" x 15'
- Fabricated Sheet Metal, painted or powder coated.
- With Metal J-Lock collars unless specified otherwise |
|
|
|
|
|
|
|
|
|
Jumbo Series Helicopter Heaters
|
|
|
|
|
|
|
Details and Accessories
(centrifugal fan not included)
|
|
400K BTU Jumbo Indirect Fired Oil Heater - CAN-J400-O |
|
|
|
- OIL Fueled (Diesel, Kerosene, Fuel Oil)
- Two-stage Startup means no cold air delivered
- Heat Output: 400K BTU
- 4,240 CFM
- Standard with pneumatic tires, pre heated oil filter
- 21 AMP Draw at Startup; 25 AMP Circuit Recommended
- Burner not attached. Some assembly required.
- Weight: 353 lbs
|
|
Add Centrifugal Fan:
$740 + s/h
|
|
|
|
|
|
|
|
|
|
Details and Accessories
(centrifugal fan not included)
|
|
400K BTU Jumbo Indirect Fired Gas Heater - CAN-J400-G |
|
|
|
- GAS Fueled (Natural Gas, Propane)
- Gas consumption: 400 Cubic Feet per Hour.
- Two-stage Startup means no cold air delivered
- Heat Output: 400K BTU
- 4,240 CFM
- 21 AMP Draw at Startup; 25 AMP Circuit Recommended
- Burner not attached. Some assembly required.
- Weight: 353 lbs
|
|
Add Centrifugal Fan:
$733 + s/h
|
|
|
|
|
|
|
|
|
|
Details and Accessories
|
|
700K BTU Jumbo Indirect Fired Oil Heater - CAN-J700-O |
|
|
|
- OIL Fueled (Diesel, Kerosene, Fuel Oil)
- Two-stage Startup means no cold air delivered
- Heat Output: 700K BTU
- 7,420 CFM
- Standard with pneumatic tires, pre heated oil filter
- 21 AMP Draw at Startup; 25 AMP Circuit Recommended
- Burner not attached. Some assembly required.
- Weight: 550 lbs
|
|
Add Centrifugal Fan:
$1,443 + s/h
|
|
|
|
|
|
|
|
|
|
Details and Accessories
|
|
700K BTU Jumbo Indirect Fired Gas Heater - CAN-J700-G |
|
|
|
- GAS Fueled (Natural Gas, Propane)
- Gas consumption: 700 Cubic Feet per Hour.
- Two-stage Startup means no cold air delivered
- Heat Output: 700K BTU
- 7,420 CFM
- 21 AMP Draw at Startup; 25 AMP Circuit Recommended
- Burner not attached. Some assembly required.
- Weight: 550 lbs |
|
Add Centrifugal Fan:
$1,435 + s/h
|
|
|
|
|
|
|
|
|
|
Details and Accessories
|
|
900K BTU Jumbo Indirect Fired Oil Heater - CAN-J900-O |
|
|
|
- OIL Fueled (Diesel, Kerosene, Fuel Oil)
- Two-stage Startup means no cold air delivered
- Heat Output: 900K BTU
- 8,830 CFM
- Standard with pneumatic tires, pre heated oil filter
- 21 AMP Draw at Startup; 25 AMP Circuit Recommended
- Burner not attached. Some assembly required.
- Weight: 793 lbs
|
|
Add Centrifugal Fan:
$1,490 + s/h
|
|
|
|
|
|
|
|
|
|
Details and Accessories
|
|
900K BTU Jumbo Indirect Fired Gas Heater - CAN-J900-G |
|
|
|
- GAS Fueled (Natural Gas, Propane)
- Gas consumption: 900 Cubic Feet per Hour.
- Two-stage Startup means no cold air delivered
- Heat Output: 900K BTU
- 8,830 CFM
- 21 AMP Draw at Startup; 25 AMP Circuit Recommended
- Burner not attached. Some assembly required.
- Weight: 793 lbs
|
|
Add Centrifugal Fan:
$1,477 + s/h
|
|
|
|
|
|
|
|
|
|
|
|
Jumbo Accessories
|
|
|
|
|
|
|
|
|
Digital Thermostat for Cantherm EC and Jumbo Heaters - CAN-TSTAT |
|
|
|
- High Quality Thermostat
- Wire not included. |
|
|
|
|
|
|
|
|
|
4-1 Jumbo Splitter - Four 11" Outputs |
|
|
|
- For top of Jumbo 115 and 150 heaters
- Accepts 11" x 25' PVC Enviro Ducting
- Order with Jumbo Heater and it will come installed
- With Metal J-Lock collars unless specified otherwise
|
|
|
|
|
|
|
|
|
|
2-1 Jumbo-400 Splitter - Two 16" Outputs |
|
|
|
- For top of Jumbo 400 Heater
- Order with Jumbo 400 Heater and it will come installed
- Weight 12 lbs. |
|
|
|
|
|
|
|
|
|
2-1 Jumbo-700 Splitter - Two 20" Outputs |
|
|
|
- For top of Jumbo 700 Heater
- Order with Jumbo 700 Heater and it will come installed
- Weight 12 lbs. |
|
|
|
|
|
|
|
|
|
3-1 Jumbo-700 Splitter - Three 16" Outputs |
|
|
|
- For Jumbo 700 Heaters
- With Metal J-Lock collars unless specified otherwise |
|
|
|
|
|
|
|
|
|
2-1 Jumbo-900 Splitter - Two 20" Outputs |
|
|
|
- For top of Jumbo 900 Heater
- Order with Jumbo 900 Heater and it will come installed
- Weight 12 lbs. |
|
|
|
|
|
|
|
|
|
3-1 Jumbo-900 Splitter - Three 16" Outputs |
|
|
|
- For Jumbo 900 Heaters
- With Metal J-Lock collars unless specified otherwise |
|
|
|
|
|
|
|
|
|
On-Board Fuel Tank for Jumbo 400 |
|
|
|
Made-to-order option, the tank sits below the unit with the wheels mounted to the tank. Allow two days for assembly.
- Dimensions: 28x56x12
- Weight: 80 lbs. |
|
|
|
|
|
|
|
|
|
On-Board Fuel Tank for Jumbo 700 |
|
|
|
Made-to-order option, the tank sits below the unit with the wheels mounted to the tank. Allow two days for assembly.
- Dimensions: 28x56x12
- Weight: 80 lbs. |
|
|
|
|
|
|
|
|
|
On-Board Fuel Tank for Jumbo 900 |
|
|
|
Made-to-order option, the tank sits below the unit with the wheels mounted to the tank. Allow two days for assembly.
- 37 US Gallons
- Dimensions: 28x56x12
- Weight: 80 lbs. |
|
|
|
|
|
|
|
|
|
Ducting
|
|
|
|
|
|
|
|
|
EnviroDuct PVC Ducting |
|
|
|
- PVC/ Polyester VentaTex® 13oz/sq yd Fabric
- Steel-wire helix/ with heavy duty wear strips,
- Metal J-Lock collars available
- Temperature range: -20 to 200 degrees F; -29 to 93 degrees C
- Standard Pitch: 6" dia.- 3" pitch; 8", 11"- 4" pitch.
- Expanded Pitch: Available on 12" diameter & larger
|
|
|
|
|
|
|
|
|
|
|
|
|
|
