|
|
|
|
|
|
|
|
Home > Heaters > Indirect Fired Heaters > Jumbo 115 Indirect Heater |
|
| |
|
|
|
|
| |
Jumbo 115 Heater and Accessories
|
|
|
|
|
|
|
|
|
Details and Accessories
|
|
460K BTU Jumbo Indirect Fired Oil Heater - CAN-J115 |
|
|
|
- Two-stage Startup means no cold air delivered
- Heat Output: - 460K BTU
- 4,709 CFM
- 21 AMP Draw at Startup; 25 AMP Circuit Recommended
- Indirect-Fired Fan: 220V, 60Hz, single phase or three phase models
- Fuel: Diesel, Kerosene, Fuel Oil, JP-8, Jet A Fuel
- 24" Heat Outlet
- 18" Adapter FREE when ordering with ducts..
- Weight: 429 lbs
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Detailed Specs:
- Two-Stage Startup means no cold air delivered
- Heat Output: 460,000 BTU
- Indirect-Fired Fan: 110V, 60Hz, requires 25 AMP breaker minimum.
- Air Flow: 4,709 CFM
- Fuel: Burns Diesel, Kerosene, Fuel Oil, JP-8, Jet A Fuel
- Fuel Consumption: 2.5 Gallons/hour
- Size: 68"x33"x48"
- Weight: 429 lbs
- Standard Equipment: - Fuel Tank NOT provided. Use
auxiliary or optional fuel tank, Internal Thermostat, 24" Outlet, Solid Tires, Tested before shipping
- Optional Equipment: Remote Thermostat, On-board Fuel Tank, Ducting, Splitters, Duct Extensions
- You will be contacted with shipping.
|
|
|
|
|
|
|
|
|
Remote Thermostat |
|
|
|
|
|
Remote Thermostat |
|
|
|
- with 30' Cord
- for Jumbo
- (requires wiring) |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Splitters |
|
|
|
|
|
Jumbo Reducer - 24 to 18 |
|
|
|
- Necks down the Jumbo 24" port to accept 18" x 25' PVC Enviro Ducting
- For top or side of Arcotherm Jumbo 115 or 150 heater
- With Metal J-Lock collars unless specified otherwise
|
|
|
|
|
|
|
|
|
|
|
|
|
|
2-1 Jumbo 115 Splitter - 24 to two 18's |
|
|
|
- For top of Jumbo 115
Heater
- Accepts 18x25 PVC DUCT: 18" x 25'
- Order with Jumbo 115 Heater and it will come installed
- Weight 12 lbs. |
|
|
|
|
|
|
|
|
|
|
|
|
|
3-1 Jumbo Splitter - 24 to three 12's |
|
|
|
- For side of Jumbo Heaters
- Accepts 18"x25' PVC Enviro Ducting
- With Metal J-Lock collars unless specified otherwise |
|
|
|
|
|
|
|
|
|
|
|
|
|
4-1 Jumbo Splitter -24 to four 11's |
|
|
|
- For top of Jumbo 700 and 900
heaters
- Accepts 11" x 25' PVC Enviro Ducting
- Order with Jumbo Heater and it will come installed
- With Metal J-Lock collars unless specified otherwise
|
|
|
|
|
|
|
|
|
|
|
|
|
|
EC Two-Way Splitter |
|
|
|
- Converts 12" to two 12" ducts
- Uses Canvas PVC 6" Ducting
- Fabricated Sheet Metal, painted or powder coated.
- With Metal J-Lock collars unless specified otherwise
|
|
|
|
|
|
|
|
|
|
|
|
|
|
EC Heater Three Way Splitter |
|
|
|
- Converts one 12" to connect to three 6" ducts
- Uses CAN6X15 Canvas Ducting, 6" x 15'
- Fabricated Sheet Metal, painted or powder coated.
- With Metal J-Lock collars unless specified otherwise
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Ducting |
|
|
|
|
|
|
|
|
Cotton Canvas Ducting |
|
|
|
The material of choice for cold weather helicopter users,
because canvas is the most durable. Dragging ducting across ice is
really hard on ducting and canvas holds up better than PVC.
- Standard Duct for the EC Series heaters. Also works with Jumbo
Models
- Metal J-Lock collars allow quick assembly and knockdown
- Extra-durable cotton canvas ducting for high abrasive application.
|
|
|
|
|
|
|
|
|
|
EnviroDuct PVC Ducting |
|
|
|
- PVC/ Polyester VentaTex® 13oz/sq yd Fabric
- Steel-wire helix/ with heavy duty wear strips
- Temperature range: -20 to 200 degrees F; -29 to 93 degrees C
- Check heater listing for applicable size ducts
|
|
|
|
|
|
|
|
|
|
|
|
|
|
EnviroDuct Hi/Low Ducting |
|
|
|
- Equipmentland Premium quality
- Fabric reinforced thermoplastic elastomer with steel-wire helix construction
- More flexible than PVC in cold weather
- 25' lengths - 125' min. required for custom order
- Wire rope ends for simple tandem extending.
- In stock with belted cuff, J-Lock or Pin-Lock avail.
- Temperature range: -60 to 250 degrees F; -51 to 121 degrees C
- Standard Pitch: 6" & 7" dia. 3" pitch; 8" & larger 4" pitch
|
|
12" x 25': $375 +30 s/h
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
