Phoen400 Heater and accessories for fuel and natural gas models

New for 2209-2010 heater season, Cantherm Phoen400 Portable Heaters are Indirect Fired Heaters with more output and features normally associated with the larger Jumbo heaters. These fuel operated models run on diesel, kerosene and jet fuel - and now a natural gas model. A full complement of ducts, duct splitters and now a re-circulating duct adapter for more efficiency. Even equipped with a separate combustion intake for operation in extra dusty applications. Order today.

 

	NEW MODEL! Details and Accessories		400K BTU Indirect Fired Oil Heater  - CAN-PHOEN400
			- High/low heat output: 400K BTU high/ 260K BTU low - Air Flow: 3,250 CFM; Heat Rise 165 deg. F. - 2.85 GPH high; 1.94 GPH low; 36 Gallon Tank - 110V, 60 Hz - Pneumatic Tires, Fuel Gauge, Preheated fuel filter - Four loop combustion chamber. - Ducting: up to 100' run. Duct adapter required. - Optional: thermostat, external tank, lift kit, tune-up kit - Heavy Duty Kit Option (total 507 lbs) - 26" x 47" x 74"; Weight: 383 lbs		$4,560 Free Shipping

	NEW MODEL! Details and Accessories		380K BTU Indirect Fired NATURAL GAS Heater  - CAN-PHOEN380N
			- High/low heat output: 380K BTU high/ 240K BTU low - Air Flow: 3,250 CFM; Heat Rise 165 deg. F. - Similar to oil fueled model shown at left - 110V, 60 Hz - Pneumatic Tires, Fuel Gauge, Preheated fuel filter - Four loop combustion chamber. - Duct Splitter Accessories for 20", 16" and 12" ducts - Ducting and Recirculating Duct Adapter available - Optional: thermostat, external tank, lift kit, tune-up kit - Shown with Heavy Duty Kit Option (total 507 lbs) - 26" x 47" x 74"; Weight: 383 lbs		$4,868 Free Shipping

 

Remote Thermostat

			02AC516 Remote Thermostat
			- with 30' Cord, - plug-in for EC Heaters		$100 +$20 s/h

Splitters and Accessories

			PHOEN400-HDKIT Heavy Duty Frame Kit for Phoen400 Heater
			Heavy Duty Frame Kit for Cantherm Phoen400 Indirect Fired Heater. Heavy frame with lift ring, 360 degree protection and pallet fork pockets. - As shown on photo of Phoen400 - Order with heater		$700

 

			PHOEN400-FT  Fuel Tank Kit for Phoen400 Heater
			External fuel tank for Cantherm Phoen400 Indirect Fired Heater. - Order with heater		$210

 

			PHOEN400RDA  Re-circulating Duct Adapter for Phoen400 Heater
			- Now you can recycle nearly 100% of heated air. - Unit mounts inline with a return air to heater - Unique feature. Much more efficient. - Order with heater - Photo on left show INTAKE end of Phoen 400		$340

 

			PHOEN400 One Way Duct Adapter - 20"
			For  EC400 heaters to accept ducting, add this collar which adapts the EC400 series heaters to accept 20" J-Lock, Pin-Lock or Belted Cuff Ducting. - With Metal J-Lock collars unless specified otherwise in comments box on order form		$200 +30 s/h

 

			PHOEN400 Two Way Duct Adapter - 16"
			Splitter for EC400 heaters to accept two 16" x 15' diameter ducting with J-Lock, Pin-Lock or Belted Cuff connectors. - With Metal J-Lock collars unless specified otherwise in comments box on order form		$340 +30 s/h

 

	Not Shown		PHOEN400 Three Way Duct Adapter - 12"
			For  EC400 heaters to accept ducting, add this collar which adapts the EC400 series heaters to accept three 12" x 12' ducts with  J-Lock couplers.		$340 +30 s/h

Ducting

			Cotton Canvas Ducting
			The material of choice for cold weather helicopter users, because canvas is the most durable. Dragging ducting across ice is really hard on ducting and canvas holds up better than PVC. - Standard Duct for the EC Series heaters. Also works with Jumbo Models - Metal J-Lock collars allow quick assembly and knockdown - Extra-durable cotton canvas ducting for high abrasive application.		12" x 12': $170 +30 s/h

			EnviroDuct PVC Ducting
			- PVC/ Polyester VentaTex® 13oz/sq yd Fabric - Steel-wire helix/ with heavy duty wear strips - Temperature range: -20 to 200 degrees F; -29 to 93 degrees C - Check heater listing for applicable size ducts		11"x25': $180 + $30 s/h 16"x15' : $190 + $30 s/h 20"x25': $335 + $30 s/h 24"x25': $430 + $30 s/h