No Sales Tax!
 
EQUIPMENTLAND.com
Contact equipmentland.com
 
   attachments, implements and tools for construction, farm and home
 
  

scart
qcart
specials
warranty
policies
contact
parts

   

FEMA Member
Locator Dept.

 
 

EQUIPMENTLAND.com
EC 300 Heater and Accessories

Cantherm EC 70 Indirect Fired Heater
Details and Accessories
306K BTU Indirect Fired Oil Heater  - CAN-EC300  
- Heat Output: 306,000 BTU
- Air Flow: 2,500 CFM
- 2.18 GPH; 27.7 Gallon Tank
- Standard with pneumatic tires, pre-heated oil filter
- Four loop combustion chamber.
- 12" duct adapter FREE when ordering with duct/s.
- Weight: 264 lbs
$3,495 + s/h

EC 300 Oil Heater
Detailed Specs:

- Heat Output: 306,000 BTU
- Air Flow: 2,500 CFM
- Indirect-Fired Fan: 110V, 60Hz
- Fuel: Burns Diesel, Kerosene, Fuel Oil, JP-8, Jet A Fuel
- Tank Capacity: 27.7 US Gallons
- Fuel Consumption: 2.18 Gallons/hour
- Size: 73"L x 28"W x 41"H
- Weight: 264 lbs
- Standard Equipment: Fuel Tank, Internal Thermostat, 12" Collar Duct Adapter, Pneumatic Tire Upgrade, Tested before shipping.
- Optional Equipment: Remote Thermostat, Ducting, Splitters, Duct Extensions

Remote Thermostat
Remote Thermostat for EC Heaters
Remote Thermostat  
- with 30' Cord,
- plug-in for EC Heaters
$123 +$20 s/h
Splitters
EC Heater Collar
EC 300 Duct Adapter  
The EC Collar is provided at no charge for new EC heaters. For retrofitting existing EC heaters to accept Ducting, add this collar which necks down the EC series heaters to 12" to accept J-Lock, Pin-Lock or Belted Cuff Ducting.
- With Metal J-Lock collars unless specified otherwise
$167 +30 s/h

EC Two Way Splitter
EC Two-Way Splitter  

- Converts 12" to two 12" ducts
- Uses Canvas PVC 6" Ducting
- Fabricated Sheet Metal, painted or powder coated.
- With Metal J-Lock collars unless specified otherwise

$160 +30 s/h

EC Heater Three Way Splitter
EC Heater Three Way Splitter  

- Converts one 12" to connect to three 6" ducts
- Uses CAN6X15 Canvas Ducting, 6" x 15'
- Fabricated Sheet Metal, painted or powder coated.
- With Metal J-Lock collars unless specified otherwise

$175 +30 s/h

Ducting
Cotton Canvas Heater Ducting
Cotton Canvas Ducting  

The material of choice for cold weather helicopter users, because canvas is the most durable. Dragging ducting across ice is really hard on ducting and canvas holds up better than PVC.

- Standard Duct for the EC Series heaters. Also works with Jumbo Models
- Metal J-Lock collars allow quick assembly and knockdown
- Extra-durable cotton canvas ducting for high abrasive application.

6" x 15': $175 +30 s/h
12" x 12': $180 +30 s/h
12" Duct Tandem Connector: $50 +15 s/h

PVC ducting
12"x25' EnviroDuct PVC Ducting  

- PVC/ Polyester VentaTex® 13oz/sq yd Fabric/ steel-wire helix/ with heavy duty wear strips,
- Available in J-Lock
- Temperature range: -20 to 200 degrees F; -29 to 93 degrees C
- Standard pitch: 6" & 7" dia. 3" pitch; 8" & larger -4" pitch.
- Expanded Pitch: Available on 12" diameter & larger

$239 +30 s/h

EC Heater Collar
EnviroDuct Hi/Low Ducting  
- Available only from Equipmentland
- Fabric reinforced thermoplastic elastomer with steel-wire helix construction
- More flexible than PVC in cold weather
- 25' lengths - 125' min. required
- Wire rope ends for simple tandem extending.
- Available in J-lock, pin-lock, or belted cuff
- Temperature range: -60 to 250 degrees F; -51 to 121 degrees C
- Standard Pitch: 6" & 7" dia. 3" pitch; 8" & larger 4" pitch
12" x 25': $375 +30 s/h

w/ J-Lock
w/ Pin-Lock
w/ belted cuff

 

Equipmentland can be your source for our listings and others. Try the Equipmentland Locator.  
Equipmentland.com
HOME   |   ORDERING HELP   |   WARRANTY   |    PARTS   |   POLICIES   |   CONTACT US
 
Copyright 2008 EQUIPMENTLAND.com - All Rights Reserved