
	MANUFACTURERS

Skid Steers
- Bale Stabbers
- Breakers
- Buckets
- Compactors
- Diggers
- Forestry
- Pallet Forks
Tractors
- Bale Stabbers
- Box Blades
- Buckets
- Diggers
- Ditchers
- Forestry
- Pallet Forks
Backhoes
- Bale Stabbers
- Breakers
- Buckets
- Compactors
- Diggers
- Pallet Forks
- Thumbs
Excavators
- Asphalt Cutter
- Breakers
- Buckets
- Compactors
- Diggers
- Grapples
- Pallet Forks
- Thumbs
Attachments
- Adapters
- Asphalt Cutters
- Bale Stabbers
- Booms and Jibs
- Box Blades
- Breakers- Mounted
- Buckets
- Concrete Tools
- Diggers
- Ditchers
- Edgers
- Forestry
- Fuel Tanks
- Grapple Buckets
- Pallet Forks
- Post Drivers
- Rakes
- Rock Pickers
- Rubber Tracks
- Tanks
- Snow Equipment
- Thumbs
- Trenchers
- Work Platforms
Construction
Agriculture
- Augers
- Bale Stabbers
- Buckets
- Diggers
- Ditchers
- Forestry
- Grapples
- Loaders
- Post Drivers
- Rock Pickers
- Tanks
- Trenchers
Heaters
Maintenance
Shopping Cart
Quote Cart

EQUIPMENTLAND.com
EC 200 Heater and Accessories

Cantherm EC 200 Indirect Fired Oil Heater

Details and Accessories

219K BTU Indirect Fired Oil Heater - CAN-EC200

- Heat Output: 219,000 BTU
- Air Flow: 1,530 CFM; Heat Rise 150 deg. F.
- 1.56 GPH; 17.2 Gallon Tank; 110V, 60 Hz
- Pneumatic Tires, Fuel Gauge, Preheated fuel filter
- Four loop combustion chamber.
- Ducting: can use three 6"x15"; two 12"x12" or one 14"
- Duct adapters required.
- Optional: thermostat, lift kit, tune-up kit, ducts
- 20" x 37" x 47"; Weight: 176 lbs

$2,612 Free Shipping

Detailed Specs:

- Heat Output: 219,000 BTU
- Air Flow: 1,530 CFM
- Indirect-Fired Fan: 110V, 60Hz
- Fuel: Burns Diesel, Kerosene, Fuel Oil, JP-8, Jet A Fuel
- Tank Capacity: 17.2 US Gallons
- Fuel Consumption: 1.56 Gallons/hour
- Size: 47"L x 20"W x 37"H
- Weight: 176 lbs
- Standard Equipment: Pneumatic tires, pre-heated oil, NEW 4 look combustion chamber, Fuel Tank, Internal Thermostat, 12" Collar Duct Adapter, Tested before shipping.

Remote Thermostat

02AC516 Remote Thermostat

- with 30' Cord,
- plug-in for EC Heaters

$100 +$20 s/h

Splitters

EC 200 Duct Adapter - 11", 12" or 14"

For EC200 heaters to accept ducting, add this collar which adapts the EC series heaters to accept J-Lock, Pin-Lock or Belted Cuff Ducting.
- With Metal J-Lock collars unless specified otherwise
- Specify 11", 12" or 16" in comments box when ordering

$110+30 s/h

EC200 2-1 Two-Way Splitter

- Converts 12" to two 12" ducts
- Uses Canvas or PVC Ducting
- Fabricated Sheet Metal, painted or powder coated.
- With Metal J-Lock collars unless specified otherwise

$295 +30 s/h

EC200 3-1 Heater Three Way Splitter

- Converts one 12" to connect to three 6" ducts
- Uses CAN6X15 Canvas Ducting, 6" x 15'
- Fabricated Sheet Metal, painted or powder coated.
- With Metal J-Lock collars unless specified otherwise

$195 + 30 s/h

Ducting

Cotton Canvas Ducting

The material of choice for cold weather helicopter users, because canvas is the most durable. Dragging ducting across ice is really hard on ducting and canvas holds up better than PVC.

- Standard Duct for the EC Series heaters. Also works with Jumbo Models
- Metal J-Lock collars allow quick assembly and knockdown
- Extra-durable cotton canvas ducting for high abrasive application.

12" x 12': $170 +30 s/h

EnviroDuct PVC Ducting

- PVC/ Polyester VentaTex® 13oz/sq yd Fabric
- Steel-wire helix/ with heavy duty wear strips
- Temperature range: -20 to 200 degrees F; -29 to 93 degrees C

- Check heater listing for applicable size ducts

11"x25': $180 + $30 s/h

16"x15' : $190 + $30 s/h

20"x25': $335 + $30 s/h

24"x25': $430 + $30 s/h

EQUIPMENTLAND.com EC 200 Heater and Accessories

- Converts 12" to two 12" ducts - Uses Canvas or PVC Ducting - Fabricated Sheet Metal, painted or powder coated. - With Metal J-Lock collars unless specified otherwise