|
|
|
|
|
|
BELLTEC HYDRAULIC DIGGERS FOR SKID STEERS
|
|
|
|
|
|
NC Series Hole Digging Auger Drives
For light to moderate drilling applications. No case drain hoses required for these units. Planetary gear reduction, reversible hydraulic motor, solid steel 1.25" swivel pins. Heavy Duty bushings in swivel, 2" hex output shaft. Read Equipmentland.com's Belltec reference guide to find the right hole digging unit for you.
|
|
|
|
M Series Hole Digging Auger Drives
For heavy to moderate drilling applications. No case drain hoses required. Features include plantary gearbox with no snap rings. Heavy duty nut prevents shaft pull out. Heavy duty motors with high pressure seal. Heavy duty hexagon housing. 2" hex output shaft. Read Equipmentland.com's Belltec reference guide to find the right hole digging unit for you.
|
|
|
H Series Hole Digging Auger Drives
Heaviest in class planetary gearbox with no snap rings for the. Heavy duty drive housings. 2" hex bolt on output shaft. Read Equipmentland.com's Belltec reference guide to find the right hole digging unit for you.
|
|
|
|
HD Series Hole Digging Auger Drives
No case drains required (for systems operating at less than 400psi back pressure). Heavy Duty drive housings. 2" Hex shaft.
|
|
|
|
|
|
111367 Hose Kit for Belltec HD Series Drives |
|
|
|
|
|
(2) 3/4" x 108" Hoses
Quick Connectors not provided |
|
|
|
|
|
111364 Case Drain Kit |
|
|
|
|
|
Includes fittings and hoses |
|
|
|
|
|
111704 HighFlow Relief Valve |
|
|
|
|
|
Includes fittings and hoses |
|
|
|
|
Details Available
|
|
|
|
|
|
- Auger offset for operator visibility
- Self-Centering 4-Way Auger Swivel
- Bulkheads available for most loaders
- Heavy Duty Frames Resist Twisting
- Saddle Bracket to support auger during transport
- Fits Quik-Tach Skid Steer units 1995 and newer
Weights vary 120-300 lbs.
|
|
Prices vary:
$294 to $1,100
|
|
|
|
|
|
|
| |
|
|
|
Choose Augers and Extensions.
Dirt augers are mostly for the Midwest alluvial soils. The "penny test" indicates rock harness. Either the penny will scratch the rock or the rock will scratch the penny. Belltec Augers will drill either but hard rock REQUIRES maximum down pressure and maximum torque. But the heaviest-duty auger you can afford. Replacement teeth are inexpensive but not commonly needed. Belltec Augers are standard in four foot lengths with extensions to six foot. Additional extensions or an Ellington Expandable Kelly Bar can be added to dig to depths of 20 plus feet. (Belltec has an excellent warranty up to five years on some models but limited to 10 foot depths).
|
|
|
|
|
|
|
|
|
|
Equipment for:
Construction:
Farm:
Other:
|
|
|
|
|
|
