|
|
|
|
|
|
|
|
Home > Attachments > Diggers > Belltec Diggers > TM-48 Series Hydraulic Diggers |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Three Point Tractor Mounted Hydraulic Hole Digger - BEL-TM48-HTL-GRS |
|
|
Details and Accessories
|
|
- For Three Point lift Tractors with three remote hydraulic valves.
- Drills holes to 60"
- Dual-Leveling Cylinder Kit
- Hydraulic Top Link to fit in place of manual tractor top link.
- Rigid frame with hydraulic down pressure with relief valve.
- Heavy Duty Drive Line: automatic torque release when overloaded.
- Hoses and fittings to attach to tractor remote outlets
(Quick couplers furnished)
- Adjustable Skids
- Uses Belltec 2" Hex-drive TM-48 Augers, Extensions and Couplers |
|
dfsgasdgsadgsadgsagdsagdsagdsa
CAT 2 Hitch spacer kit for
32" spacing: $75
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Three Point Tractor Mounted Hydraulic Hole Digger - BEL-TM48-HTL |
|
|
Details and Accessories
|
|
- For Three Point lift Tractors with two remote hydraulic valves.
- Hydraulic top link to fit in place of manual top link.
- Drills holes to 60"
- Hydraulic Top link to fit in place of manual top link.
- Rigid frame with hydraulic down pressure with relief valve.
- Heavy Duty Drive Line: automatic torque release when overloaded.
- Hoses and fittings to attach to tractor remote outlets.
(Quick Couplers furnished)
- Screw type leveling brace: Hydraulic top link plus level fore and aft
- Adjustable skids.
|
|
CAT 2 Hitch spacer kit for
32" spacing: $78
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Belltec Industries TM48 Post Hole Digger mounts easily on three-point tractors with over 28 horsepower which have at least two hydraulic remote valves. Our machine's design and performance go way beyond today's tractor mounted post hole diggers.
Our unique system transforms a three-point tractor into a drilling machine capable of doing what the big truck rigs do: drill accurate, straight holes (to a depth of 5 ft on a single auger) in almost any drilling condition, including solid rock and concrete.
If drilling holes is a problem for you, we have the solution. Whether it be hard, dry ground, rocky soil or solid rock. We can drill it.
Frame-Guided Auger System
Twin hydraulic cylinders connect the auger carriage to the mainframe of the machine. The cylinders move the carriage up and down the mainframe slides. Adjustable feet on the mainframe may be leveled. Since the auger is guided into the ground by the mainframe, as long as the mainframe is straight and the carriage is level, the machine will drill straight holes.
The hydraulic cylinders are directly connected to the Gear Drive-Auger Carriage without any leverage or linkage. This gives much better control over the auger in rocks, roots or soft ground. If the cylinders are moved 1", so is the auger. Movement is not multiplied by leverage or slack in linkage. A person is much less likely to corkscrew the auger through a root or in soft ground. More complete control over the augers makes the operator's job easier and faster.
Adjustable Relief Valve
Allows you to adjust down pressure to the weight of the tractor.
|
|
|
|
|
|
|
|
Gear Drive
The auger is powered by a heavy duty gearbox. The gearbox is protected by an automatic torque limiter within the P.T.O. shaft which instantly relieves torque when overloaded and automatically resets itself as soon as P.T.O. speed is reduced. This eliminates troublesome shear pins and down time because of broken P.T.O. shafts and cross kits.
Down Pressure
Utilizing the tractor's weight through these unique Locking Arms, apply up to 4500 lbs down-pressure can be supplied by opposing twin hydraulic cylinders. This eliminates the need for anyone to "ride" the machine risking injury. Down pressure also helps keep teeth sharp.
|
|
|
|
|
|
|
|
Choose Augers and Extensions.
Dirt augers are mostly for the Midwest alluvial soils. The "penny test" indicates rock harness. Either the penny will scratch the rock or the rock will scratch the penny. Belltec Augers will drill either but hard rock REQUIRES maximum down pressure and maximum torque. But the heaviest-duty auger you can afford. Replacement teeth are inexpensive but not commonly needed. Belltec Augers are standard in four foot lengths with extensions to six foot. Additional extensions or an Ellington Expandable Kelly Bar can be added to dig to depths of 20 plus feet. (Belltec has an excellent warranty up to five years on some models but limited to 10 foot depths).
|
|
|
|
|
|
|
|
|
|
|
|
Equipment for:
Construction:
Farm:
Other:
|
|
|
|
|
|
