Home > Attachments > Diggers > Belltec Diggers > HD Series Hydraulic Diggers   HD Series Hole Diggers and Earth Augers Magnum Hydraulic Planetary Auger Drives with augers and heads for any substance DOWN-PRESSURE DRILLING MACHINE for hydraulic units 10- 60 gpm up to 3,000 PSI for 5,000 ft. lbs. torque   The Belltec HD-series is available for heavy duty work. These units have a bolt-on flange for protection of the gear unit. Belltec provides the first tubular frame on the market with the largest and strongest cradle. Belltec downward-pressure hydraulic diggers provide the ability to dig more vigorously through harder materials from dirt to solid rock and concrete with slower drilling speeds from higher capacity hydraulics. These units mount easily to most models of skid steer loaders, backhoes, extending boom forklifts, mini excavators, excavators and tractor front-end loaders. Coupled with BELLTEC's full line of augers for dirt and rock, these drilling units meet all your drilling needs from dirt to solid rock and concrete. FEATURES: - EXTRA Heavy-Duty Flange-Mount Drive Housing constructed of 3/8" steel plate - Double-Reduction Planetary Gears - Bolt-On 2" Hex Output Shaft - with exclusive flanged hub to handle heavy radial loads - Two-Year Warranty - Case Drains Required for systems with more than 400 psi back pressure. - Heavy-Duty Reversible Hydraulic Motor. High pressure seal. No snap rings - Belltec "heavier-than-them all" PLANETARY Gear Reduction - Heavy-Duty Flange-Mount Drive Housing constructed of 3/8" steel plate - Tubular Quick-Detach Frame - available for skid steer loader mounting - Swivel-Type Mounting Kits for backhoes and excavators available - Use with Belltec H-Series Augers - the heaviest and most proven for rock and dirt - Heavy-Duty Nut - prevents shaft pull out - Bolt-On 2" Hex Output Shaft - with exclusive flanged hub to handle heavy radial loads MODELS AND SPECIFICATIONS: Fit the right model to your hydraulic system. Optimum auger speed for dirt is upwards to 100 RPM but for drilling solid rock you need low RPM. The correct Belltec unit will match your hydraulic flow range with your desired output speeds, with consideration to your usage duty. HD Series Hole Digging Auger Drives No case drains required (for systems operating at less than 400psi back pressure). Heavy Duty drive housings. 2" Hex shaft. Details and Accessories Belltec Hydraulic Planetary Auger Drive - BEL-HD-400 - 4091 Ft.Lbs. Max. Output Torque - 25-45 GPM @ < 3,000 PSI - 36in. Max Auger Diameter for Rock - 36in. Max Auger Diameter for Dirt - Weight: 347 lbs. MOUNTING KITS REQUIRED $3,510 + 300 s/h: Details and Accessories Belltec Hydraulic Planetary Auger Drive - BEL-HD-500 - 5256 Ft.Lbs. Max. Output Torque - 30-60 GPM @ < 3,000 PSI - 48in. Max Auger Diameter for Rock - 48in. Max Auger Diameter for Dirt - Weight: 347 lbs. MOUNTING KITS REQUIRED $3,726 + 300 s/h:   Related: SkidSteers / Backhoes / Excavators / Augers / Diggers 111367 Hose Kit for Belltec HD Series Drives $210 + s/h (2) 3/4" x 108" Hoses Quick Connectors not provided 111364 Case Drain Kit $135 + s/h Includes fittings and hoses 111704 HighFlow Relief Valve $300 + s/h Includes fittings and hoses Exclusive to Belltec H and HD Series Diggers, a bolt-on 2" hex output shaft significantly reduces costly down time and repair costs if a shaft is bent or broken. Extra-large step with non-slip material for skid loaders and canister so owner's manual stays with unit. Large cradle holds dirve in place and allow for better visibility while in transport position.   Choose Augers and Extensions. Dirt augers are mostly for the Midwest alluvial soils. The "penny test" indicates rock harness. Either the penny will scratch the rock or the rock will scratch the penny. Belltec Augers will drill either but hard rock REQUIRES maximum down pressure and maximum torque. But the heaviest-duty auger you can afford. Replacement teeth are inexpensive but not commonly needed. Belltec Augers are standard in four foot lengths with extensions to six foot. Additional extensions or an Ellington Expandable Kelly Bar can be added to dig to depths of 20 plus feet. (Belltec has an excellent warranty up to five years on some models but limited to 10 foot depths). DIRT AUGERS HEAVY DUTY DIRT AUGERS (fractured rock) ROCK AUGERS (dirt, concrete, shale, limestone, coleci, solid rock) PUFF DRILL AUGERS (T-Post Holes)	Equipment for: SKID STEERS TRACTORS BACKHOES EXCAVATORS Construction: ASPHALT CUTTERS ADAPTERS AUGERS & DRIVES BOOMS HANDHELD BREAKERS MOUNTED BREAKERS BUCKETS COMPACTION CONCRETE TOOLS DRILLING PALLET FORKS HEATERS HOLE DIGGERS JACKHAMMERS LASERS LOADERS POWER TOOLS RAKES RUBBER TRACKS THUMBS WORK PLATFORMS Farm: AUGERS & DRIVES BALE STABBERS BLADES & HITCHES BUCKETS DIGGING DITCHERS FORKS FORESTRY GRAPPLES HEATERS HOLE DIGGERS LOADERS MULCHERS ROCK BUCKETS ROCK PICKERS RUBBER TRACKS TRENCHERS Other: BLAST CABINETS COMPRESSORS COOLING FANS GEOSYNTHETICS MR. MAGNET PRESSURE WASHERS SURFACING SAFES TILE SAWS VENTILATION

	Equipmentland can be your source for our listings and others. Try the Equipmentland Locator.
	HOME   |   ORDERING HELP   |   WARRANTY   |    PARTS   |   POLICIES   |   CONTACT US   Copyright 2008 EQUIPMENTLAND.com - All Rights Reserved