M Series Hole Digging Auger Drives

* mounting kit required *

For heavy to moderate drilling applications. No case drain hoses required. Features include plantary gearbox with no snap rings. Heavy duty nut prevents shaft pull out. Heavy duty motors with high pressure seal. Heavy duty hexagon housing. 2" hex output shaft. Read Equipmentland.com's Belltec reference guide to find the right hole digging unit for you.

Max Hydraulic Planetary Earth Auger Drives with augers and heads for any substance.

DOWN-PRESSURE DRILLING MACHINE for hydraulic units 10-30 gpm up to 3,000 PSI The M Series (Max) is a medium duty in the relative Belltec line, in three models ranging from 1,339 - 3,582 ft lbs torque.

For applications where you are drilling lots of holes. (If you are doing lots of super-serious work you will opt for a Belltec H-Series model). Coupled with BELLTEC's augers for dirt and rock, these drilling units meet all your drilling needs from dirt to solid rock and concrete. Downward pressure units provide the ability to dig more vigorously through harder materials from dirt to solid rock and concrete with slower drilling speeds from higher capacity hydraulics such as from full-size backhoes and more. These units mount easily to most models of skid steer loaders, backhoes, extending boom forklifts, small excavators and tractor front-end loaders. No case drain hoses are required.

FEATURES:

- Heavy-Duty Reversible Hydraulic Motor. High pressure seal. No snap rings
- Belltec "heavier-than-them all" PLANETARY Gear Reduction
- Heavy-Duty Hexagon Housing constructed of 3/8" steel plate
- Use with Belltec H-Series Augers - the heaviest and most proven for rock and dirt
- 2" Hex Output Shaft (the heavier H-Series has a bolt-on flange for drive protection)

MODELS AND SPECIFICATIONS:
Fit the right model to your hydraulic system. Optimum auger speed commonly is at 50-70 RPM.