|
|
Click for details
and ordering
|
|
Economy PTO Digger for Farm Tractors up to 25 HP - AGM-EC044 |
|
|
|
- Light Duty: for 6" and 9" dia. augers, 32" or 44" length
- For Category 1 three-point
- PTO speed not to exceed 540 RPM
- 2-1/2" steel pipe frame. No Guide Lever
- 2" round output shafts, augers secured by a collar and two 1/2" bolts
- Warranty: Gearbox: 5-year limited; Materials/Workmanship: One-year
- Weight: 154 lbs
See Augers Available
|
|
|
$369 + $227
|
|
|
 |
|
|
|
|
|
|
Click for details
and ordering
|
|
Standard-duty 32" PTO Digger for Farm Tractors up to 30 HP - AGM-ED32 |
|
|
|
- Standard Duty: for Augers to 12:" dia., 32" length
- For Category 1 three-point
- PTO speed not to exceed 540 RPM
- 2-1/2" steel pipe frame. Guide Lever Included
- 2" round output shafts, augers secured by a collar and two 1/2" bolts
- Warranty: Gearbox: 5-year limited; Materials/Workmanship: One-year
- Weight: 190 lbs
See Augers Available
|
|
|
$467 + $227
|
|
|
|
|
|
|
|
|
|
Click for details
and ordering
|
|
Medium duty PTO Digger for Farm Tractors up to 50HP- AGM-XL44A |
|
|
|
- Category I Three Point Only
- No Guide Lever
- PTO speed not to exceed 540 RPM
- Crane size is 3" pipe with a 1500 pound lift capacity
- Augers available in 32" or 44" lengths to 24" dia.
- Heavy duty drive shaft protected by shear pin.
- Optional scarifier tip for digging loose rock and caliche available for 9" & 12" augers
- 2" round output shafts, augers secured by a collar and two 1/2" bolts
- Warranty: Gearbox: 5-year limited, Materials/Workmanship: One-year
- Weight: 180 lbs
See Augers Available
|
|
|
$619 + $227
|
|
|
|
|
|
|
|
|
|
Click for details
and accessories
|
|
Med/Heavy Duty PTO Digger for Farm Tractors up to 80HP - AGM-XL44H |
|
|
|
- For Category 1 and 2, 3-Point Hitch via reversible pins, w/ Easy On/Off
- Guide lever included
- PTO speed not to exceed 540 RPM
- Crane size is 3" pipe with a 1500 pound lift capacity
- Augers available in 32" or 44" lengths to 24" dia.
- Heavy duty drive shaft protected by shear pin
- Optional: scarifier tips for loose rock; caliche are available for 9" & 12" augers
- 2" round output shafts, augers secured by a collar and two 1/2" bolts
- Warranty: Gearbox: 5-year limited, Materials/Workmanship: One-year
- Weight: 185 lbs
See Augers Available
|
|
|
$714 + $227
|
|
|
|
|
Down Pressure Kit
|
|
$699 + $20
|
|
|
|
|
|
|
|
|
|
Click for details
and accessories
|
|
Heavy Duty PTO Digger for Farm Tractors 90 HP - AGM-BR75 |
|
|
|
- Heavy-duty Pendulum-type Digger - Guide Lever Included
- Heavy-duty power shaft with shear pin; Gearbox Slip Clutch Optional
- For Category I amd II 3-Point Hitch; PTO speed not to exceed 540 RPM
- 2" round output shafts, augers secured by a collar and two 1/2" bolts.
- Augers available in 32" or 44" lengths to 36" dia.
- Bolt-on hard surfaced edges easily removed for sharpening
- Inexpensive replacement on auger sizes up to 12"
- Lift Crane is made of 3" steel pipe that will lift up to 2,000 pounds
- Warranty: Gearbox: 5-year limited, Materials/Workmanship: One-year
- Weight: 232 lbs
See Augers Available
|
|
|
$971 + $227
|
|
|
|
|
Down Pressure Kit
|
|
$699 + $20
|
|
|
|
|
|
|
|
|
NC Series Hole Digging Auger Drives
For light to moderate drilling applications. No case drain hoses required for these units. Planetary gear reduction, reversible hydraulic motor, solid steel 1.25" swivel pins. Heavy Duty bushings in swivel, 2" hex output shaft. Read Equipmentland.com's Belltec reference guide to find the right hole digging unit for you.
|
|
|
|
M Series Hole Digging Auger Drives
For heavy to moderate drilling applications. No case drain hoses required. Features include plantary gearbox with no snap rings. Heavy duty nut prevents shaft pull out. Heavy duty motors with high pressure seal. Heavy duty hexagon housing. 2" hex output shaft. Read Equipmentland.com's Belltec reference guide to find the right hole digging unit for you.
|
|
|
H Series Hole Digging Auger Drives
Heaviest in class planetary gearbox with no snap rings for the. Heavy duty drive housings. 2" hex bolt on output shaft. Read Equipmentland.com's Belltec reference guide to find the right hole digging unit for you.
|
|
|
|
HD Series Hole Digging Auger Drives
No case drains required (for systems operating at less than 400psi back pressure). Heavy Duty drive housings. 2" Hex shaft.
|
|
|
[an error occurred while processing this directive]
|
|
|
|
|
|
|
Details and Accessories
|
|
- Recommended for 50 HP (29hp minimum)
- For Three Point Tractors with two remote hydraulic
valves.
- One valve for twin cylinders creating down pressure
- Second valve for leveling fore an aft by hydraulic cylinder
to fit in place of manual top link.
- Additional leveling fore and aft by screw type brace
- Rigid frame with hydraulic down pressure with relief valve.
- Heavy Duty Drive Line: automatic release when overloaded.
- Hoses and fittings to attach to tractor remote outlets.
- Hose quick couplers furnished
- Adjustable skids.
- Weight: 1,100 lbs. plus auger/s
- Uses Belltec 2" Hex-drive, Extensions and Couplers
|
|
CAT 2 Hitch spacer kit for
32" spacing: $78
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Details and Accessories
|
|
- Recommended for 50 HP (29hp minimum) tractors
- For Three Point Tractors with three remote hydraulic
- One valve for twin cylinders creating down pressure
- Second valve for leveling fore an aft by hydraulic cylinder
to fit in place of manual top link.
- Third valve for even additional leveling
- Drills holes to 60", even solid rock with correct auger
- Rigid frame with hydraulic down pressure with relief valve.
- Heavy Duty Drive Line: automatic release when overloaded.
- Hoses and fittings to attach to tractor remote outlets
- Hose quick couplers furnished
- Adjustable Skids
- Uses Belltec 2" Hex-drive, Extensions and Couplers
- Weight: 1,100 lbs. plus auger/s
|
|
CAT 2 Hitch spacer kit for
32" spacing: $75
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
