Equipment for: SKID STEERS TRACTORS BACKHOES EXCAVATORS Construction: ASPHALT CUTTERS ADAPTERS AUGERS & DRIVES BOOMS HANDHELD BREAKERS MOUNTED BREAKERS BUCKETS COMPACTION CONCRETE TOOLS DRILLING PALLET FORKS HEATERS HOLE DIGGERS JACKHAMMERS LASERS LOADERS POWER TOOLS RAKES RUBBER TRACKS THUMBS WORK PLATFORMS Farm: AUGERS & DRIVES BALE STABBERS BLADES & HITCHES BUCKETS DIGGING DITCHERS FORKS FORESTRY GRAPPLES HEATERS HOLE DIGGERS LOADERS MULCHERS ROCK BUCKETS ROCK PICKERS RUBBER TRACKS TRENCHERS Other: BLAST CABINETS COMPRESSORS COOLING FANS GEOSYNTHETICS MR. MAGNET PRESSURE WASHERS SURFACING SAFES TILE SAWS VENTILATION
	Pallet Forks For SkidSteers Clamp on Forks Pallet Fork w/ Rail Guard Pallet Fork w/ Tele Boom Fork w/ Bale Stabber Fork w/ Invert System John Deer Forks Hydro-Max High Reach Fork Macgrab Grapple Fork Severe Duty Pallet Fork Block Fork Stock Pallet Fork Pulpwood/Fork-Lift Combo Pipe Handling Fork Caster Wheels Pallet Fork with Roll Guard - MDS-5505   For most loader models and Bobcat Quick Tach (see Loader Bobcat Adapters). - 3-Point models also available, CAT 2 & 3N - Lift capacity: 5,500 lbs - Solid pallet fork tines - standard taper on tine with rounded tip - Tine specs: 1-1/ 2" thick x 4" wide x 48" Long - Tine width adjustable 8" TO 55" on zinc plated 1-5/8" slider rails - Attachment mounts built to OEM Specifications - See-through Roll Guard is standard on all models - Bulkhead height with roll guard: 35" TO 38" - Weight: 495 lbs. approx. Please specify the year and model of your loader in the comments area of the order form. You will be advised of shipping charges before processing. $1,699 +s/h   Pallet Fork with Telescopic Boom - MDS-5508   For most loader models and Bobcat Quick Tach (see Loader Bobcat Adapters). - 3-Point models also available, CAT 2 & 3N - Lift capacity: Fork 5,500 lbs; Boom 4,000 lbs. - Solid pallet fork tines - standard taper on tine with rounded tip - Tine specs: 1-1/ 2" thick x 4" wide x 48" Long - Tines Width Adjustable on Zinc plated 1-5/8" slider rails - Attachment mounts built to OEM Specifications - See-through Roll Guard is standard on all models - Boom adjust to 5 different lengths in 8" increments. - Bulkheads 1/4" high-tensile steel tubing: height with roll guard: 35" TO 38" - Weight: 645 lbs. approx. Capacities for Boom Extensions Hook Position: A B C D E Boom Lenghth: 53" 61" 69" 77" 85" PALLET FORK W /TELESCOPIC BOOM Maximum Load: 4,400 4,400 3,000 2,500 2,000 Please specify the year and model of your loader in the comments area of the order form. You will be advised of shipping charges before processing. $2,440 +s/h   Telescopic Boom for Tractor Loaders and Skid Steers MDS-5511   For most loader models and Bobcat Quick Tach (see Loader Bobcat Adapters). A heavy duty dedicated boom attachment. Easy to pick up and attach. - Lift Capacity: 7000 lbs - Weight: 325 lbs Approx. Capacities for Boom Extensions Hook Position: A B C D E Boom Lenghth: 53" 61" 69" 77" 85" TELESCOPIC BOOM Maximum Load: 7,000 5,000 3,500 2,500 2,000 Please specify the year and model of your loader in the comments area of the order form. You will be advised of shipping charges before processing. $1135 + $225 s/h Combination Pallet Fork / Bale Stabber with Roll Guard - MDS-5506   For most loader models and Bobcat Quick Tach (see Loader Bobcat Adapters). - 3-Point Models Available, CAT 2 & 3N - Lift capacity: Fork 5,500 lbs; Stabber 4000 lbs - Solid pallet fork tines - standard taper on tine with rounded tip - Tine Specs: 1-1/ 2" thick x 4" wide x 48" Long - Tine width adjustable 8" TO 55" on zinc plated 1-5/8" slider rails - Attachment mounts built to OEM Specifications - See-through Roll Guard is standard on all models - Bulkhead height with roll guard: 35" TO 38" - Weight Approx. 570 lbs Please specify the year and model of your loader in the comments area of the order form. You will be advised of shipping charges before processing. $2,303 + s/h Pallet Fork with Inverter System - MDS-5507   Increases loader lift height 48" to better handle bulk seed bags For most loader models and Bobcat Quick Tach (see Loader Bobcat Adapters). - 3-Point Models Available, CAT 2 & 3N - Lift Capacity: Fork: 5500 lbs; Inverter: 4000 lbs - Solid pallet fork tines - standard taper on tine with rounded tip - Tine Specs: 1-1/ 2" thick x 4" wide x 48" Long - Tine width adjustable 8" TO 55" on zinc plated 1-5/8" slider rails - Attachment mounts built to OEM Specifications - See-through Roll Guard is standard on all models - Bulkhead height with roll guard: 35" TO 38" - Weight Approx. 610 lbs Please specify the year and model of your loader in the comments area of the order form. You will be advised of shipping charges before processing. $2,240 + s/h Rail Type Pallet Forks for John Deer 400/500 Quick Tach Loaders   - 1-1/4" x 4" Select length to the right; 400 lbs; 4000 lb Lift Capacity: - Industry standard Class 2- ITA tines slide on horizontal rail with notches for pre-set widths - Heavy duty frame to handle both 4,000 or 5,200 lb. load capacity - Full-length heavy duty roll guard, slat style for better visibility - Load retaining D-Ring in center of roll guard - You will be contacted with shipping before your order is processed $869 + s/h 42 Inches 46 Inches 48 Inches Rail Type Pallet Forks for John Deer 400/500 Quick Tach Loaders   - 1-1/2" x 4" Select length to the right; 420 lbs; 5200 lb Lift Capacity: - Industry standard Class 2- ITA tines slide on horizontal rail with notches for pre-set widths - Heavy duty frame to handle both 4,000 or 5,200 lb. load capacity - Full-length heavy duty roll guard, slat style for better visibility - Load retaining D-Ring in center of roll guard - You will be contacted with shipping before your order is processed $964 + s/h 42 Inches 46 Inches 48 Inches Rail Type Pallet Forks for Skid Steers - MDS-5515-144   - Fits all models of skid steer loaders 1995 and newer - Heavy duty mounting plate with reinforced receiver lip, tapered for easy hookup - Heavy duty frame to handle both 4,000 or 5,200 lb. load capacity - Full-length heavy duty roll guard, slat style for better visibility - Super Heavy 1/2" x 3-1/2" slide rails $1,014 + s/h 42 Inches 46 Inches 48 Inches Rail Type Pallet Forks for Skid Steers - MDS-5515-124   - Fits all models of skid steer loaders 1995 and newer - Heavy duty mounting plate with reinforced receiver lip, tapered for easy hookup - Heavy duty frame to handle both 4,000 or 5,200 lb. load capacity - Full-length heavy duty roll guard, slat style for better visibility - Super Heavy 1/2" x 3-1/2" slide rails $1,167 + s/h 42 Inches 46 Inches 48 Inches Hook-on Fork for Compact Tractors - MDS2-1200HOF   - Lift Capacity: 1,200 lbs - Tines: 1" x 4" x 36" solid - Width between tines: min. 6" - Powder Coated - Approx. Weight 185 lbs You will be advised of shipping charges before processing. $545 + $215 s/h [an error occurred while processing this directive]

	Equipmentland can be your source for our listings and others. Try the Equipmentland Locator.
	HOME   |   ORDERING HELP   |   WARRANTY   |    PARTS   |   POLICIES   |   CONTACT US   Copyright 2008 EQUIPMENTLAND.com - All Rights Reserved