|
|
|
|
|
|
|
|
|
|
Construction Site Heaters
|
|
|
|
|
|
|
Direct and Indirect-Fired Forced-Air Portable Heaters in Propane, Natural Gas, Kerosene, or Diesel, and Jet fuel such as JP-8. From small propane units to custom installed units of 4.5 million BTUs and up. Equipmentland offers a full lineup of portable heaters for the jobsite. Whatever heater you need we may have a model for you. Both direct fired heaters and indirect fired heaters. Ducting, thermostats, splitters, spares or whatever your heater need, we can help. Take our seasoned professional advice and order your heater as early as possible to avoid potential supply, pricing or delivery challenges that may occur when the thermometer plunges and everyone wants their heater "right now".
|
|
|
|
|
|
|
|
|
Trekker Radiant Oil Heater - ITR-TREH |
|
|
|
|
- 4,000 to 12,000 BTU
- Natural Draft Vaporizing Burner
- No Electricity Required
- Heats 160 - 760 sq ft room w/ 8' ceiling
- 3" Exhaust, Heat Shield, Cleaning Tool
- CSA Certified, UL standards
- 12" W x 16" H x 15" D; 16 lbs.
|
|
|
|
|
Related: Heaters / Electric Heaters / Diesel Heaters
|
|
|
|
|
|
|
30K BTU Tundra Toaster - PATR-PH2 |
|
|
|
|
30,000 BTU/HR - Portable Propane Heater
- 12V DC
- 7 AMP
- 160 CFM
- 14 lbs
- Controllable Heat Flow 100º to 700º |
|
|
|
|
|
|
|
|
|
|
|
|
|
45k BTU Direct Fired Oil Heater; PATR-DFA45 |
|
|
|
|
- Fan Voltage: 110-115V 60Hz
- Air Flow: 175 CFM
- Size: 33"x15"x15"
- Heat Rise (ambient): 100 degrees
- Warranty: One Y ear
- Weight: 39 lbs |
|
|
|
|
|
|
|
|
|
|
[an error occurred while processing this directive]
[an error occurred while processing this directive]
|
|
|
65k BTU Direct Fired Oil Heater; PATR-DFA65 |
|
|
|
|
- 65,000 BTU/HR
- Fan Voltage: 110-115V 60Hz
- Air Flow: 230 CFM
- Size: 33"x15"x15"
- Heat Rise (ambient): 100 degrees
- Warranty: One Y ear
- Weight: 39 lbs |
|
|
|
|
|
|
|
|
|
|
[an error occurred while processing this directive]
[an error occurred while processing this directive]
|
|
|
110k BTU Indirect-Fired Oil Heater; PHP-HVF110 |
|
|
|
|
- Heat Output: 110,000 BTU/HR
- Indirect-Fired Fan: 120v, 4amp; CSA US Certified
- Air Flow: 880 CFM; Ductable up to 25'
- Fuel: Diesel, Kerosene, Fuel Oil, JP-8, Jet A
- Fuel Tank: 12 US Gallons, Pre-Heated Fuel Filter
- Shipping Size: 38"L x 22"W x 25"H, 100 lbs.
- Could heat 20'x40' tent, (30 deg. temp rise) |
|
|
|
|
|
|
ACCESSORIES for HVF110
|
|
|
|
|
AR-110 - Duct Ring - $110 |
|
|
|
|
|
|
WD1225 -12" x 20' Duct (poly) 20' - $300 |
|
|
|
|
|
|
8347NR - Remote Thermostat - $120 |
|
|
|
|
|
|
21177 - Diffuser for ducting- $250 |
|
|
|
|
|
|
|
Details and Accessories
|
|
113K BTU Indirect Fired Oil Heater - CAN-EC100 |
|
|
|
- Heat Output: 113,000
BTU
- Air Flow: 880 CFM; Heat Rise 150 deg. F.
- .81 GPH; 11.9 Gallon Tank; 110 V
- Pneumatic Tires, Fuel Gauge, Preheated fuel filter std.
- Uses 11" x 25' or 12" x 12' duct; No adapter needed
- 18" x 27" x 47"; 94 lbs.
- Optional: thermostat, tune-up kit, ducts |
|
|
|
|
|
|
[an error occurred while processing this directive]
|
|
|
120k BTU Direct Fired Oil Heater; PATR-DFA120 |
|
|
|
|
- Fan Voltage: 110-115V 60Hz
- Air Flow: 500 CFM
- Size: 41"x19"x21"
- Heat Rise (ambient): 100 degrees
- Warranty: One Y ear
- Weight: 65 lbs |
|
|
|
|
|
|
|
|
|
|
[an error occurred while processing this directive]
|
|
|
136k BTU Indirect-Fired Oil Heater - PAT-40A |
|
|
models 40A, 50A and 130A
|
|
- Air Flow: 1120 CFM
- Indirect-Fired Fan: 110v 15A 41,000 watts
- Fuel: Diesel, Kerosene, Fuel Oil, JP-8, Jet A
- Outlet & Flue Size: 12"/30cm
- Size: 52"x28"x34"
- Heat Rise (ambient: 100 degrees
- Warranty: One Y ear
- Weight: 176 lbs |
|
|
|
|
|
|
|
|
|
|
[an error occurred while processing this directive]
[an error occurred while processing this directive]
|
|
|
170k BTU Direct Fired Oil Heater; PATR-DFA170 |
|
|
|
|
170,000 BTU/HR
- Fan Voltage: 110-115V 60Hz
- Air Flow: 600 CFM
- Size: 41"x19"x21"
- Heat Rise (ambient): 100 degrees
- Warranty: One Y ear
- Weight: 80 lbs
- Lighted gauge, easy off cap |
|
|
|
|
|
|
|
|
|
|
|
|
|
205k BTU Indirect Fired Oil Heater; HVF210 |
|
|
|
|
- Heat Output:205,000 BTU/HR
- Indirect-Fired Fan: 120v, 9amp; CSA US Certified
- Air Flow: 1,530 CFM; Ductable up to 50'
- Fuel: Diesel, Kerosene, Fuel Oil, JP-8, Jet A
- Fuel Tank: 14 US Gallons, Preheated Fuel Filter
- Shipping Size: 57"L x 24"W x 32"H, 180 lbs
- Standard Equipment: Fuel Tank
- Could heat 40'x60' tent, (30 deg. temp rise) |
|
|
|
|
|
|
ACCESSORIES for HVF180
|
|
|
|
|
20' Duct: $270 |
|
|
|
|
|
|
AR210 - Duct Ring - $110 |
|
|
|
|
|
|
WD1225 - Duct (poly) 25' - $300 |
|
|
|
|
|
|
8347NR - Remote Thermostat - $120 |
|
|
|
|
|
|
21177 - Diffuser for ducting- $250 |
|
|
|
|
|
|
|
|
|
193k BTU Indirect Fired Oil Heater - PAT-50A |
|
|
|
|
- Fan Voltage: 110v 15A
- Watts: 58,000 watts
- Outlet & Flue Size: 14"/35cm
- Air Flow: 2230 CFM
- Size: 66"x31"x40"
- Heat Rise (ambient: 100 degrees
- Warranty: One Y ear
- Weight: 330 lbs
|
|
|
|
|
|
|
|
|
|
|
|
|
|
210k BTU Direct Fired Oil Heater; PATR-DFA210T |
|
|
|
|
- Fan Voltage: 120V 60hz
- Air Flow: 600 CFM
- Size: 42"x20"x18"
- Heat Rise (ambient): 100 degrees
- Warranty: One Year
- Weight: 80 lbs |
|
|
|
|
|
|
|
|
|
|
|
Details and Accessories
|
|
219K BTU Indirect Fired Oil Heater - CAN-EC200 |
|
|
|
- Heat Output: 219,000
BTU
- Air Flow: 1,530 CFM; Heat Rise 150 deg. F.
- 1.56 GPH; 17.2 Gallon Tank; 110V, 60 Hz
- Pneumatic Tires, Fuel Gauge, Preheated fuel filter
-
Four loop combustion chamber.
- Ducting: can use three 6"x15"; two 12"x12" or one 14"
- Duct adapters required.
- Optional: thermostat, lift kit, tune-up kit, ducts
- 20" x 37" x
47"; Weight: 176 lbs |
|
|
|
|
|
|
|
|
|
300k BTU Indirect Fired Oil Heater; HVF310 |
|
|
|
|
- Heat Output: 300,000 BTU/HR
- Indirect-Fired Fan: 120v, 12amp; CSA US Certified
- Air Flow: 2,500 CFM; Ductable up to 50'
- Fuel: Diesel, Kerosene, Fuel Oil, JP-8, Jet A
- Fuel Tank: 26 gallon tank, Preheated Fuel Filter
- Shipping Size: C69"L x 27"W x 38"H; 270 lbs.
- Could heat 40'x80' tent, (30 deg. temp rise) |
|
|
|
|
|
|
ACCESSORIES for HVF300A
|
|
|
|
|
AR310 - Duct Ring - $155 |
|
|
|
|
|
|
WD1825 - Duct (poly) 25' - $300 |
|
|
|
|
|
|
8347NR - Remote Thermostat w/ 30' cord- $120 |
|
|
|
|
|
|
23189 - Diffuser for ducting- $442 |
|
|
|
|
|
|
|
Details and Accessories
|
|
306K BTU Indirect Fired Oil Heater - CAN-EC300 |
|
|
|
- Heat Output: 306,000
BTU
- Air Flow: 2,500 CFM
- 2.18 GPH; 27.7 Gallon Tank; 110V, 60 Hz
- Pneumatic Tires, Fuel Gauge, Preheated fuel filter
-
Four loop combustion chamber.
- Ducting: (2) 12"x12' or one 16" x 15'. adapter required
- 11.4 amp Draw, 175 deg. F heat rise
- Optional: thermostat, external tank, lift kit, tune-up kit
- 28" x 41" x 73"; Weight: 264 lbs |
|
|
|
|
|
|
|
|
|
|
[an error occurred while processing this directive]
|
|
|
|
|
|
Details and Ducting Available
|
|
Out of stock for 2008/2009 Winter
- 352K BTU/H (high), 150K BTU/H (low); 8,000 CFM
- 1/2 hp Blower, 1/3hp Burner Motor; 11.8 amp
- 190 degree Temperature Rise; Direct Spark Ignition
- Fuel Consumption: Propane 16.28 lb/hr; Gas 352 cf/hr
- Protective Frame for Stacking and Handling
- Valve switch for gas type selector.
- 56"L x 42"H x 33"W(w/wheels); Net Weight: 440 lbs
- Made/ships from Winnepeg, Canada
|
|
|
|
|
|
|
|
|
|
|
[an error occurred while processing this directive]
|
NEW MODEL!
Details and Accessories |
|
400K BTU Indirect Fired Oil Heater - CAN-PHOEN400 |
|
|
|
- High/low heat output:
400K BTU high/ 260K BTU low
- Air Flow: 3,250 CFM; Heat Rise 165 deg. F.
- 2.85 GPH high; 1.94 GPH low; 36 Gallon Tank
- 110V, 60 Hz
- Pneumatic Tires, Fuel Gauge, Preheated fuel filter
-
Four loop combustion chamber.
- Ducting: up to 100' run. Duct adapter required.
- Optional: thermostat, external tank, lift kit, tune-up kit
- Heavy Duty Kit Option (total 507 lbs)
- 26" x 47" x 74"; Weight: 383 lbs |
|
|
|
|
|
|
|
NEW MODEL!
Details and Accessories |
|
380K BTU Indirect Fired NATURAL GAS Heater - CAN-PHOEN380N |
|
|
|
- High/low heat output:
380K BTU high/ 240K BTU low
- Air Flow: 3,250 CFM; Heat Rise 165 deg. F.
- Similar to oil fueled model shown at left
- 110V, 60 Hz
- Pneumatic Tires, Fuel Gauge, Preheated fuel filter
-
Four loop combustion chamber.
- Duct Splitter Accessories for 20", 16" and 12" ducts
- Ducting and Recirculating Duct Adapter available
- Optional: thermostat, external tank, lift kit, tune-up kit
- Shown with Heavy Duty Kit Option (total 507 lbs)
- 26" x 47" x 74"; Weight: 383 lbs |
|
|
|
|
|
|
|
Details and Accessories
(centrifugal fan not included)
|
|
400K BTU Jumbo Indirect Fired Oil Heater - CAN-J400-O |
|
|
|
- OIL Fueled (Diesel, Kerosene, Fuel Oil)
- Two-stage Startup means no cold air delivered
- Heat Output: 400K BTU
- 4,240 CFM
- Standard with pneumatic tires, pre heated oil filter
- 21 AMP Draw at Startup; 25 AMP Circuit Recommended
- Burner not attached. Some assembly required.
- Weight: 353 lbs
|
|
Add Centrifugal Fan:
$740 + s/h
|
|
|
|
|
|
|
|
|
|
Details and Accessories
(centrifugal fan not included)
|
|
400K BTU Jumbo Indirect Fired Gas Heater - CAN-J400-G |
|
|
|
- GAS Fueled (Natural Gas, Propane)
- Gas consumption: 400 Cubic Feet per Hour.
- Two-stage Startup means no cold air delivered
- Heat Output: 400K BTU
- 4,240 CFM
- 21 AMP Draw at Startup; 25 AMP Circuit Recommended
- Burner not attached. Some assembly required.
- Weight: 353 lbs
|
|
Add Centrifugal Fan:
$733 + s/h
|
|
|
|
|
|
|
|
|
|
|
|
400k Indirect Fired Oil Heater Trailer - PATR-120XD |
|
|
Details and Accessories
|
|
- 395K BTU/hr; 3354 CFM axial fan
- Yanmar Diesel engine
- Fuel: Diesel, No.1, 2 - JP8 (specify when ordering)
- 45 Gal Tank: 3 gal/hr; 10-15 hrs run time
- Generator 4000W/120/240/60
- Outlet Size: 12"; Ducting Available
- Heat Rise (ambient: 100 degrees
- Warranty: One Y ear
- Size: 119"x61"x63"
- Weight: 1200 lbs
|
|
|
|
|
|
|
|
|
|
|
[an error occurred while processing this directive]
|
|
|
Dual Natural Gas/Propane Fuel Heater - PHP-S405 |
|
|
|
|
750k BTU Propane and Natural Gas Heater; PHP-1801
400,000 BTU/Hr
- Vapor Propane and Natural Gas Space Heater
- 115 Volts 12 amp
- CSA US Certified. MEA approved for NYC
- Fan: 2000 CFM 1/4 HP
- 44" L x 16.5"W x 22" H; 95 lbs.
- Panel Mounted Standard On/Off Thermostat (on/off)
- Equipped with 3/4" x 25' hose and regulator |
|
|
|
|
|
|
|
|
|
570k BTU Indirect Fired Oil Heater - PAT-130A |
|
|
|
|
- Heating oil, kerosene or Diesel Heater
- Fan Voltage: 110v 25A
- Watts: 120,000 watts
- Outlet & Flue Size: 20"/50cm
- Air Flow: 4700 CFM
- Size: 75"x40"x53"
- Heat Rise (ambient: 100 degrees
- Warranty: One Y ear
- Weight: 650 lbs
|
|
|
|
|
|
|
|
|
|
|
[an error occurred while processing this directive]
[an error occurred while processing this directive]
|
Details and Accessories
|
|
700K BTU Jumbo Indirect Fired Oil Heater - CAN-J700-O |
|
|
|
- OIL Fueled (Diesel, Kerosene, Fuel Oil)
- Two-stage Startup means no cold air delivered
- Heat Output: 700K BTU
- 7,420 CFM
- Standard with pneumatic tires, pre heated oil filter
- 21 AMP Draw at Startup; 25 AMP Circuit Recommended
- Burner not attached. Some assembly required.
- Weight: 550 lbs
|
|
Add Centrifugal Fan:
$1,443 + s/h
|
|
|
|
|
|
|
|
|
|
Details and Accessories
|
|
700K BTU Jumbo Indirect Fired Gas Heater - CAN-J700-G |
|
|
|
- GAS Fueled (Natural Gas, Propane)
- Gas consumption: 700 Cubic Feet per Hour.
- Two-stage Startup means no cold air delivered
- Heat Output: 700K BTU
- 7,420 CFM
- 21 AMP Draw at Startup; 25 AMP Circuit Recommended
- Burner not attached. Some assembly required.
- Weight: 550 lbs |
|
Add Centrifugal Fan:
$1,435 + s/h
|
|
|
|
|
|
|
|
|
|
|
|
750k BTU Propane and Natural Gas Heater; PHP-1800P |
|
|
|
|
- BTU (input) 340K to 750K BTU; Temp Rise 385 degree
- Vapor Propane / Natural Gas (3/4" FNPT connecton)
- Fan forced-air - 120V; 15amp; 4200CFM; 1Hp
- Thermostat: 2-Stage Hi/Lo/Off Remote w/ 50' cord
- 62in. L x 26in. W x 30in. H
- Approximate Weight: 200 lbs.
- Simple lever change from propane to natural gas.
- 12" Wheels
- Ductable to 50'; CSA US Certified
- Potted Control Board. Unit starts w low voltage (95V) |
|
|
|
|
|
|
|
|
|
|
|
Details and Accessories
|
|
900K BTU Jumbo Indirect Fired Oil Heater - CAN-J900-O |
|
|
|
- OIL Fueled (Diesel, Kerosene, Fuel Oil)
- Two-stage Startup means no cold air delivered
- Heat Output: 900K BTU
- 8,830 CFM
- Standard with pneumatic tires, pre heated oil filter
- 21 AMP Draw at Startup; 25 AMP Circuit Recommended
- Burner not attached. Some assembly required.
- Weight: 793 lbs
|
|
Add Centrifugal Fan:
$1,490 + s/h
|
|
|
|
|
|
|
|
|
|
Details and Accessories
|
|
900K BTU Jumbo Indirect Fired Gas Heater - CAN-J900-G |
|
|
|
- GAS Fueled (Natural Gas, Propane)
- Gas consumption: 900 Cubic Feet per Hour.
- Two-stage Startup means no cold air delivered
- Heat Output: 900K BTU
- 8,830 CFM
- 21 AMP Draw at Startup; 25 AMP Circuit Recommended
- Burner not attached. Some assembly required.
- Weight: 793 lbs
|
|
Add Centrifugal Fan:
$1,477 + s/h
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Details and Ducting Available
|
|
Out of stock for 2008/2009 Winter
- 1500K BTU/H (high), 800K BTU/H (low); 8,000 CFM
- 1/2 hp; 15 amp; CSA Certified
- Natural Gas / Propane, Low Pressure w/ Quick-Valve
- Protective Frame for Stacking and Handling
- Remote Thermostat with 25' Cord Included
- 54"L x 32"H x 36"W; Net Weight: 270 lbs
|
|
|
$4,295 + s/h
|
|
|
 |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Direct Fired Construction Heaters | Indirect Fired Construction Heaters
|
|
|
|
|
|
|
|
