No Sales Tax!
 
EQUIPMENTLAND.com
Contact equipmentland.com
 
   attachments, implements and tools for construction, farm and home
 
  

scart
qcart
specials
warranty
policies
contact
parts

   

FEMA Member
Locator Dept.

Home > Attachments > Ditch Diggers

DITCHERS for Farm Tractors

Ditchers, ditching attachments, and trenching utilities from Equipmentland. Whether it is a three-point ditch digger for your farm tractor, or ditching wheels for your ATV, we may have the ditcher you need. If you don't see the ditcher you need, please call as we may be able to find it for you.

Swing Hoe Trench Digger

The Swing Hoe™ trench digging utility is a strong, hydraulically controlled boom swing that swings a full 110 degrees. This allows operators of the trench digger to dump and pick up material on either side of the trench without maneuvering the skid-steer from side to side as is required with rigid, mini-backhoe attachments.

Disc Ditcher

Designed to cut down irrigation levees or to dig a 20 inches wide by 12 inches deep ditch, promoting water control and increasing yields for all types of crops.

Offset Cut Power Ditcher

The rugged PFM power ditcher is the simplest, most economical approach to field water control. Designed to spread soil up to 30 ft. and dig ditches up to 12" deep in one pass. Excellent performance in most soil conditions and all types of crops. This Ditcher works best in soils that are relatively devoid of rocks.

Center Cut Power Ditcher

The PFM power ditch digger is the simplest, economical approach to field water control. Designed to spread soil up to 30 ft. and dig ditches up to 12” deep in one pass. Excellent performance in most soil conditions and all types of crops.

Trench Wheels for ATV

ATV DITCHING WHEELS - Just bolt the wheels to your ATV and drive through wet areas, making V-shaped trench tracks to drain surface water and save your crop. Track depth is partially dependent upon the weight of the vehicle and operator. "Deeper trenches can be achieved by simply retracing your tracks," advises Steve Raguse, owner of Raguse Manufacturing and designer of the Trench Wheel.

071905

Equipmentland can be your source for our listings and others. Try the Equipmentland Locator.  
Equipmentland.com
HOME   |   ORDERING HELP   |   WARRANTY   |    PARTS   |   POLICIES   |   CONTACT US
 
Copyright 2008 EQUIPMENTLAND.com - All Rights Reserved