Asphalt Cutters, Coulter Wheels, Asphalt Cutting Accessories

Clamp Style 16" Wheel Asphalt Cutter - AI-140BM

- For up to 3/4 yard backhoes and 1 yard loaders
- For Tractor/Loader/Backhoes
- Cutting Depth: 5"
- Weight: 179 lbs.
- Photo shows 18" model

Clamp Style 18" Wheel Asphalt Cutter - AI-185BM

- For up to 1 yard excavators and 3 yard loaders
- Most popular unit for Tractor/Loader/Backhoes
- Cutting Depth: 6.5"
- Weight: 210 lbs.

Extreme-Duty Ripper-Mount 18" Asphalt Cutter - AI-175R

- Uses existing ripper mount.
- Quick and easy mounting.
- Can remain mounted when not in use.
- Utilizes entire weight of motor grader, deep penetration.
- Ripper teeth do not have to be removed - take off the asphalt cutter and resume ripping.
- Weight 200 lbs. approximate

Heavy Duty 18" Moldboard Mount Asphalt Cutter - AI-160MB

- Pivots behind moldboard, cuts a straight edge regardless of angle of moldboard.
- Allows cutting around curves - Operator view is completely unobstructed.
- Unit dismounts in less than one minute.
- Can be taken to any job site and mounted on any motor grader.
- Can be mounted on loaders, tractors, etc. with extra Lug Mounting Kits
- 217 lbs.

Quick Coupler Mount 18" Asphalt Cutter - AI-150QC

- Quick couples to A.I Backhoe Quick Coupler, or direct to backhoe.
- Also quick couples to A.I. Cat IT and Balderson front-end loader quick coupler using bracket AC/IT100 ($957 plus $160 Pin Kit)
- With asphalt cutter directly below the boom exceptional productivity is achieved.
- Allows going from asphalt cutting to bucket work in 2 minutes or less.
- 234 lbs.

You will be contacted with shipping charges before your order is processed

Heavy Duty Scarifier Mount 18" Asphalt Cutter - AI-170S

- Use existing scarifier/ripper mount.
- Quick and easy mounting
- Can be left mounted when not in use
- Utilizes entire weight of motor grader for deep penetration
- Ripper teeth do not have to be removed, so just by removing asphalt cutter you're ripping in minutes
- 104 lbs.

Clamp-on Bucket Asphalt Cutter - GEN-130C Cut-R-Tach

Unitized welded steel frame. Special, alloy steel heat treated, cutting blade, 13.5 inch diameter, 5 inches maximum cutting depth. Win Oilite® type, sleeve type bearings, 25,000 lbs maximum down force capacity. Patented, twin screw, pivoting clamp conforms to variances in bucket shapes when mounting. Not for use with skid steer loaders.
Weight: 146 lbs.

Clamp-on Bucket Asphalt Cutter - GEN-190C Cut-R-Tach

Unitized welded steel frame. Special alloy, steel heat treated blade, 19 inch diameter, 5.5 inches maximum cutting depth. Twin Timken® type, tapered roller bearings, 50,000 lbs maximum down force capacity. Patented twin screw, pivoting clamp conforms to variances in bucket shapes when mounting. Not for use with skid steer loaders.
Weight: 245 lbs.

Clamp On Moldboard Asphalt Cutter - GEN-190M Cut-R-Tach

- 19 inch diameter, 5.5 inches maximum cutting depth.
- Adjustable jaws clamp to moldboards 13 to 28 inches high.
- Welded steel plate structural tube frame.
- Special alloy steel, heat treated, cutting blade
- Twin Timken® type, tapered roller bearings
- 50,000 lbs down force capacity
- 13 inches minimum moldboard lift required
- Weight: 315 lbs.

Scarifier Asphalt Cutter - GEN-190S Cut-R-Tach

- 19 inch diameter, 5.5 inches maximum cutting depth
- Center mounted in scarifier block of motor graders
- Twin heat treated steel shanks
- Special alloy steel, heat treated cutting blade
- Twin Timken® type, tapered roller bearings
- 50,000 lbs down force capacity
- Offset installation can be made by reversing one shank
- Used in conjunction with 190MB mounting block on loaders and backhoes

190C-0010

190C-0010 Cutting Blade
For use with all models of 190 Series Cut-R-Tach.

130C-0020

130C-0020A Cutting Blade
For use with all models of 130 Series Cut-R-Tach,
Complete with replacement sleeve type bearings and housing.

$513 + $26s/h