Box Blades Available at Equipmentland

- For Category I 3-point hitch.
- 3.5' wide; 3 Shanks.
- HP Rating: 20-2 wd.
- Rear Blades are fixed
- 1/2" x 6" Reversible cutting edge

- For Category I 3-point hitch.
- 4' wide; 4 Shanks.
- HP Rating: 30-2 wd.
- End and back plates: 3/16" steel.
- Rear Blades are fixed
- 1/2" x 6" Reversible cutting edge

- For Category I 3-point hitch.
- 5' wide; 5 Shanks.
- HP Rating: 30-2 wd.
- End and back plates: 3/16" steel.
- Rear Blades are fixed
- 1/2" x 6" Reversible cutting edge

- For Category I 3-point hitch.
- 6' wide; 6 Shanks.
- HP Rating: 30-2 wd.
- Rear Blades are fixed
- 1/2" x 6" high carbon steel Reversible cutting edge

- For Category I 3-point hitch.
- 6' wide; 6 Shanks.
- HP Rating: 30-2 wd.
- End and back plates: 3/16" steel.
- Rear Blades are fixed
- 1/2" x 6" Reversible cutting edge
- Weight: 425 lbs

- For Category II 3-point hitch.
- 7' wide; 7 Shanks.
- HP Rating: 60-2 wd.
- Rear Blades are fixed
- 1/2" x 6" high carbon steel Reversible cutting edge

- Depth: 22" Height: 22"
- Can operate in three different blade positions
- Standard Skid Steer Quick-Tach
- Adapts to most popular skid steer loaders and some compact tractors.
- Replacable bolt on cutting edges.
- Hoses and couplers included

- Depth: 30" Height: 30"
- Can operate in three different blade positions
- Standard Skid Steer Quick-Tach
- Adapts to most popular skid steer loaders and some compact tractors.
- Replacable bolt on cutting edges.
- Hoses and couplers included

- HANDEE II Box Blade w/4sh
- For Category 0 Hitches
- Approximate Capacity:10 CU.FT.
- No. Shank: 4 Each
- Main beam is 3" Square Tubing.
- Moldboard 3/16" formed steel & 3/16" end plates.
- Scarifier shank 3/4" X 2" high carbon steel.
- Cutting edges 9/32" X 4" high carbon steel
- 267 lbs

- Scarifier shank  3/4" X 2" high carbon steel.
- Approximate Capacity:15 CU.FT.
- No. Shank: 6 Each
- Main beam is 3" Square Tubing.
- Moldboard is 3/16" formed steel

- Cutting edges  9/32" X 4" high carbon steel
- 440 lbs

- Moldboard is 3/16" formed steel
- 3/16" end plates.
- Scarifier shank  3/4" X 2" high carbon steel.
- Cutting edges 9/32" X 4" high carbon steel
- 517 lbs