- 4,000 lbs load capacity
- 42" Tines
- For skid steers 1995 and newer
- 1-1/2" x 4" tines,
- Fully forged for 3-1 strength factor
- 40" Height, made by leading manufacturer

- Slips on Forks, (some QT Models available)
- Manually adjusts from 6'9" to 12'
- 6000-3000 lbs capacity
- Specify tine dimensions in order form.
- 2-3 day lead time
- Warranty One Year

- Flush Front
- Capacity 4,000 lb.(1.38" tines)
- Forged Tines 4" W
- Frame 36"H x 48"W
- Brick Guard flush with front of tines
- Bolt-on step included
- Made in USA

- Flush Front
- Capacity 6,000 lb.(1.75" tines)
- Forged Tines 4" W; Frame 36"H x 48"W
- Brick Guard flush with front of tines
- Bolt-on step included
- Made in USA

- 42" Forks; 1.5" thick
- Fits Cat. II, III and III narrow 3 point
- Does NOT include cylinder top 3 point link, hoses or couplers
- 4,500 lbs. lift on 24" load center
- 2.5" x 70" stroke hydraulic cylinder provides 70" of lifting height for the unit alone

- 1-1/2 Inch Tine Thickness, 48" long
- 4500 lb capacity
- Hydraulically adjustable tine width
- Fits universal quick couplers
- 2" cylinders with 1.125" diameter piston rods

- 1 1/4 Inch Tine Thickness, 42" long
- 3500 lb capacity
- Hydraulically adjustable tine width
- Fits universal quick couplers
- 2" cylinders with 1.125" diameter piston rods

- 1-3/4 Inch Tine Thickness, 42" long
- 5500 lb capacity
- Hydraulically adjustable tine width
- Fits universal quick couplers
- 2" cylinders with 1.125" diameter piston rods

Universal receiver for use with Uni-Tach.
75 lbs

Clamp On Pallet Forks
- These quality units are powder coated and offer an economical alternative to a dedicated pallet fork attachment.
- A drawback in certain situations is visibility impairment due to the bucket.
- 2,000 lbs cap
- 2"x3"x36"

Clamp On Pallet Forks
- These quality units are powder coated and offer an economical alternative to a dedicated pallet fork attachment.
- A drawback in certain situations is visibility impairment due to the bucket.
- 4,000 lbs cap
- 2"x3"x42"

- Fits many standup or walk behind loaders.
- May require mounting kit
- 900# Capacity fork and frame assemblies
- 42" tines - Can build to fit your quick coupler or pin on.
- NAMHw 35" frame.
- Adjustable fork spread from 0" to 34.5"

- 1" x 4" x 42" high carbon high strength forks, shaft mount;
- 2,000 lb. capacity; safety guard
- For small skid steer and mini loaders w/ universal quicktach loaders
- Will fit through a 42" opening

Fits many standup or walk behind loaders.
- May require mounting kit

Fork Size: 1" X 2" X 36" with 10" Taper

- 900# Capacity fork and frame assemblies
- 36" tines
- Can build to fit your quick coupler or pin on.
- NAMHw 35" frame.
- Adjustable fork spread from 0" to 34.5"

- 1-1/4" x 4" Select length to the right
- 400 lbs; 4000 lb Lift Capacity
- Industry standard Class 2-ITA tines slide on horizontal rail with notches for pre-set widths
- Heavy duty frame to handle both 4,000 or 5,200 lb. load capacity
- Full-length heavy duty roll guard, slat style for better visibility
- Load-retaining D-Ring in center of roll guard
- You will be contacted with shipping before your order is processed.

- 1.5" inch thick tines
- Fits all models of skid steer loaders 1995 and newer
- Heavy duty mounting plate with reinforced receiver lip, tapered for easy hookup
- Heavy duty frame to handle both 4,000 or 5,200 lb. load capacity

- Fits all "universal Quick Couplers"
- ITA Class III carriage bar
- Safety Guard Standard