Miscellaneous Pallet Fork Attachments

- Turn your MDS pallet fork into a bale stabber in seconds.
- Just remove your pallet fork tines and replace with this stabber.
- Fits onto any Class II ITA Rail Pallet Fork
- Standard Class II ITA Locking Device to center position
- 1.75" X 48" Forged Stabber
- 2400 Lb. Capacity

- Flush Front
- Capacity 4,000 lb.(1.38" tines)
- Forged Tines 4" W
- Frame 36"H x 48"W
- Brick Guard flush with front of tines
- Bolt-on step included
- Made in USA

- Flush Front
- Capacity 6,000 lb.(1.75" tines)
- Forged Tines 4" W; Frame 36"H x 48"W
- Brick Guard flush with front of tines
- Bolt-on step included
- Made in USA

- High strength light weight 2000 lb. static load capacity.
- 12' reach capacity.
- Pintle Safety Latch
- Quick coupler mounting

- 42" Forks; 1.5" thick
- Fits Cat. II, III and III narrow 3 point
- Does NOT include cylinder top 3 point link, hoses or couplers
- 4,500 lbs. lift on 24" load center
- 2.5" x 70" stroke hydraulic cylinder provides 70" of lifting height for the unit alone

- 1-1/2 Inch Tine Thickness, 48" long
- 4500 lb capacity
- Hydraulically adjustable tine width
- Fits universal quick couplers
- 2" cylinders with 1.125" diameter piston rods

- 1 1/4 Inch Tine Thickness, 42" long
- 3500 lb capacity
- Hydraulically adjustable tine width
- Fits universal quick couplers
- 2" cylinders with 1.125" diameter piston rods

- 1-3/4 Inch Tine Thickness, 42" long
- 5500 lb capacity
- Hydraulically adjustable tine width
- Fits universal quick couplers
- 2" cylinders with 1.125" diameter piston rods

For most loader models and Bobcat Quick Tach (see Loader Bobcat Adapters).
- 3-Point Models Available, CAT 2 & 3N
- Lift capacity: Fork 5,500 lbs; Stabber 4000 lbs
- Solid pallet fork tines - standard 3-Point Models Available, CAT 2 & 3N
- Lift capacity: Fork 5,500 lbs; Stabber 4000 lbs,taper on tine with rounded tip
- Tine Specs: 1-1/ 2" thick x 4" wide x 48" Long
- Tine width adjustable 8" TO 55" on zinc plated 1-5/8" slider rails
- Attachment mounts built to OEM Specifications
- See-through Roll Guard is standard on all models
- Bulkhead height with roll guard: 35" TO 38"

Turn your MDS pallet fork into a single bale stabber in seconds.
- Just remove your pallet fork tines and replace with this stabber
- Fits onto any Class II ITA Rail Pallet Fork
- Standard Class II ITA Locking Device to center position
- 1.75" X 48" Forged Stabber
- 1900 Lb. Capacity

- 16' long jib
- 2000 lbs capacity
- Quick attach for most models of telehandlers
- Warranty One Year

- Lifts approx. 15' shelf height
- 52.5" x 1.25" x 42" Forks
- Class II standard taper
- 16" rail spacing
- Lift depends on skidsteer
- 3000 lbs on 24" load centerMbr />

- Telehandler model no. required when ordering
- High strength light weight 2000 lb. static load capacity.
- 12' reach capacity.
- Pintle Safety Latch
- Quick coupler mounting

- Converts your tractor loader to a Skid Steer
- Easy to Install, No modifications necessary
- Plated pins and latch mechanism
- Fits OEM Loader hookups