Pallet Forks from Equipmentland

- 4,000 lbs load capacity
- 42" Tines
- For skid steers 1995 and newer
- 1-1/2" x 4" tines,
- Fully forged for 3-1 strength factor
- 40" Height, made by leading manufacturer

- Adjustable Tines
- 5,500 lb. lift cap; 7' height
- 1-1/ 2"T X 4"W X 48"L tines
- Constructed of High-Tensile Steel
- Load Lock Valve, #60 load lift chain
- Steel Chain Guide Rollers

- Flush Front
- Capacity 4,000 lb.(1.38" tines)
- Forged Tines 4" W
- Frame 36"H x 48"W
- Brick Guard flush with front of tines
- Bolt-on step included
- Made in USA

- 42" Forks; 1.5" thick
- Lifts approx. 15' shelf height (depending on skid steer)
- 4,500 lbs. lift on 24" load center
- 2.5" x 70" stroke hydraulic cylinder provides 70" of lifting height for the unit alone

Hook-on Fork for Compact Tractors
- Lift Capacity: 1,200 lbs
- Tines: 1" x 4" x 36" solid
- Width between tines: min. 6"
- Powder Coated 
- You will be advised of shipping charges before processing.

For most loader models and Bobcat Quick Tach (see Loader Bobcat Adapters).
- 3-Point models also available, CAT 2 & 3N
- Lift capacity: 5,500 lbs
- Solid pallet fork tines - standard taper on tine with rounded tip
- Tine specs: 1-1/ 2" thick x 4" wide x 48" Long
- Tine width adjustable 8" TO 55" on zinc plated 1-5/8" slider rails
- Attachment mounts built to OEM Specifications
- See-through Roll Guard is standard on all models
- Bulkhead height with roll guard: 35" TO 38"
- Please specify the year and model of your loader in the comments area of the order form.
- You will be advised of shipping charges before processing.

- Lift capacity: Fork 5,500 lbs; Boom 4,000 lbs.
- Tine specs: 1-1/ 2" thick x 4" wide x 48" Long
- Tines Width Adjustable on Zinc plated 1-5/8" slider rails
- Boom adjust to 5 different lengths in 8" increments.
- Bulkheads 1/4" high-tensile steel tubing: height with roll guard: 35" TO 38"

Clamp On Pallet Forks
- These quality units are powder coated and offer an economical alternative to a dedicated pallet fork attachment.
- A drawback in certain situations is visibility impairment due to the bucket.
- 1,000 lbs cap
- 2"x3"x32"

Clamp On Pallet Forks
- These quality units are powder coated and offer an economical alternative to a dedicated pallet fork attachment.
- A drawback in certain situations is visibility impairment due to the bucket.
- 3,000 lbs cap
- 2"x3"x42"

Clamp On Pallet Forks
- These quality units are powder coated and offer an economical alternative to a dedicated pallet fork attachment.
- A drawback in certain situations is visibility impairment due to the bucket.
- 6,000 lbs cap
- 3"x5"x49"

Fits many standup or walk behind loaders.
- May require mounting kit

Fork Size: 1" X 2" X 36" with 10" Taper

- 900# Capacity fork and frame assemblies
- 36" tines
- Can build to fit your quick coupler or pin on.
- NAMHw 35" frame.
- Adjustable fork spread from 0" to 34.5"

- 1.25" inch thick tines
- Fits all models of skid steer loaders 1995 and newer
- Heavy duty mounting plate with reinforced receiver lip, tapered for easy hookup
- Heavy duty frame to handle both 4,000 or 5,200 lb. load capacity- Full-length heavy duty roll guard, slat style for better visibility
- Super Heavy 1/2" x 3-1/2" slide rails

- For Telehandlers and Backhoe Loaders
- Single Arm Grapple
- 48" forks and grapple arms
- Opens to 72" height
- 3000 PSI Hydraulic System

- Lifts approx. 15' shelf height
- 52.5" x 1.25" x 42" Forks
- Class II standard taper
- 16" rail spacing
- Lift depends on skidsteer
- 3000 lbs on 24" load centerMbr />