Loading... Please wait...

Categories

phoen-heater-sale-banner-dec-2011.gif

Diesel Heaters

Direct Fired Diesel Heaters and
Indirect Fired Diesel Heaters

Diesel Heaters from Equipmentland. A full range of diesel forced-air heaters from 40,000 BTUs to one million BTU/hr diesel heater trailer from the leading manufacturers. This page includes all models of diesel heaters; also view by Direct Fired Diesel Heaters and Indirect Fired Diesel Heaters. Not sure what you need? Give us a call at 1-800-2141649 for help.

  • Heat Wagon HVF-110 portable fuel oil indirect fired heater

   110,000 Btu  - Perfect for indoor applications.
    Runs on #1 & #2 diesel, kerosene, JP-8 or Jet A fuel
    Electronic spark ignition
    Standard On/ Off control
    Ductable to 25' ( 12
    - Heat Output: 110,000 BTU/HR
    - Indirect-Fired Fan: 120v, 4amp; CSA US Certified
    - Air Flow: 880 CFM; Ductable up to 25'
    - Fuel: Diesel, Kerosene, Fuel Oil, JP-8, Jet A
    - Fuel Tank: 12 US Gallons,  Pre-Heated Fuel Filter
    - Shipping Size: 38"L x 22"W x 25"H, 100 lbs.
    - Could heat 20'x40' tent, (30 deg. temp rise)
    Optional Accessories
    AR-110 Duct Ring $110
    Duct - HWAG-WD1225
    Remote Thermostat - HWAG-8347NR
    Diffuser for ducting - HWAG-21177
    $1,950.00

  • - Heat Output: 110,000 BTU/HR
    - Indirect-Fired Fan: 120v, 4amp; CSA US Certified
    - Air Flow: 880 CFM; Ductable up to 25'
    - Fuel: Diesel, Kerosene, Fuel Oil, JP-8, Jet A
    - Fuel Tank: 12 US Gallons,  Pre-Heated Fuel Filter
    - Shipping Size: 38"L x 22"W x 25"H, 100 lbs.
    - Could heat 20'x40' tent, (30 deg. temp rise)
    Optional Accessories
    AR-110 Duct Ring $110
    Duct - HWAG-WD1225
    Remote Thermostat - HWAG-8347NR
    Diffuser for ducting - HWAG-21177
    $1,950.00

  • 170k BTU Direct Fired Oil Heater; PATR-DFA170
    170,000 BTU/HR
    - Fan Voltage: 110-115V 60Hz
    - Air Flow: 600 CFM
    - Size: 41"x19"x21"
    - Heat Rise (ambient): 100 degrees
    - Warranty: One Y ear
    - Weight: 80 lbs
    - Lighted gauge, easy off cap
    $520.00

  • 170,000 BTU/HR
    - Fan Voltage: 110-115V 60Hz
    - Air Flow: 600 CFM
    - Size: 41"x19"x21"
    - Heat Rise (ambient): 100 degrees
    - Warranty: One Y ear
    - Weight: 80 lbs
    - Lighted gauge, easy off cap
    $520.00

  • 205k BTU Indirect Fired Oil Heater - HVF210
    - Heat Output:205,000 BTU/HR
    - Indirect-Fired Fan: 120v, 9amp; CSA US Certified
    - Air Flow: 1,530 CFM; Ductable up to 50'
    - Fuel: Diesel, Kerosene, Fuel Oil, JP-8, Jet A
    - Fuel Tank: 14 US Gallons, Preheated Fuel Filter
    - Shipping Size: 57"L x 24"W x 32"H, 180 lbs
    - Standard Equipment: Fuel Tank
    - Could heat 40'x60' tent, (30 deg. temp rise)
    Optional Accessories
    AR-110 Duct Ring $110
    Duct - HWAG-WD1225
    Remote Thermostat - HWAG-8347NR
    Diffuser for ducting - HWAG-21177
    $3,250.00

  • - Heat Output:205,000 BTU/HR
    - Indirect-Fired Fan: 120v, 9amp; CSA US Certified
    - Air Flow: 1,530 CFM; Ductable up to 50'
    - Fuel: Diesel, Kerosene, Fuel Oil, JP-8, Jet A
    - Fuel Tank: 14 US Gallons, Preheated Fuel Filter
    - Shipping Size: 57"L x 24"W x 32"H, 180 lbs
    - Standard Equipment: Fuel Tank
    - Could heat 40'x60' tent, (30 deg. temp rise)
    Optional Accessories
    AR-110 Duct Ring $110
    Duct - HWAG-WD1225
    Remote Thermostat - HWAG-8347NR
    Diffuser for ducting - HWAG-21177
    $3,250.00

  • - Heat Output: 219,000 BTU
- Air Flow: 1,530 CFM; Heat Rise 150 deg. F.
- 1.56 GPH; 17.2 Gallon Tank; 110V, 60 Hz
- Pneumatic Tires, Fuel Gauge, Preheated fuel filter
- Four loop combustion chamber.
- Ducting: can use three 6
    - Air Flow: 1,530 CFM; Heat Rise 150 deg. F.
    - 1.56 GPH; 17.2 Gallon Tank; 110V, 60 Hz
    - Pneumatic Tires, Fuel Gauge, Preheated fuel filter
    - Four loop combustion chamber.
    - Ducting: can use three 6"x15"; two 12"x12" or one 14"
    - Duct adapter required.
    - Optional: thermostat, lift kit, tune-up kit, ducts
    - 20" x 37" x 47"; Weight: 176 lbs
    - Heat Output: 219,000 BTU
    $2,499.00

  • - Air Flow: 1,530 CFM; Heat Rise 150 deg. F.
    - 1.56 GPH; 17.2 Gallon Tank; 110V, 60 Hz
    - Pneumatic Tires, Fuel Gauge, Preheated fuel filter
    - Four loop combustion chamber.
    - Ducting: can use three 6"x15"; two 12"x12" or one 14"
    - Duct adapter required.
    - Optional: thermostat, lift kit, tune-up kit, ducts
    - 20" x 37" x 47"; Weight: 176 lbs
    - Heat Output: 219,000 BTU
    $2,499.00

  • 300k BTU Indirect Fired Oil Heater; HVF310
    Heat Output: 300,000 BTU/HR
    - Indirect-Fired Fan: 120v, 12amp; CSA US Certified
    - Air Flow: 2,500 CFM; Ductable up to 50'
    - Fuel: Diesel, Kerosene, Fuel Oil, JP-8, Jet A
    - Fuel Tank: 26 gallon tank, Preheated Fuel Filter
    - Shipping Size: C69"L x 27"W x 38"H; 270 lbs.
    - Could heat 40'x80' tent, (30 deg. temp rise)
    Optional Accessories
    AR-110 Duct Ring $110
    Duct - HWAG-WD1225
    Remote Thermostat - HWAG-8347NR
    Diffuser for ducting - HWAG-21177
    $3,899.00

  • Heat Output: 300,000 BTU/HR
    - Indirect-Fired Fan: 120v, 12amp; CSA US Certified
    - Air Flow: 2,500 CFM; Ductable up to 50'
    - Fuel: Diesel, Kerosene, Fuel Oil, JP-8, Jet A
    - Fuel Tank: 26 gallon tank, Preheated Fuel Filter
    - Shipping Size: C69"L x 27"W x 38"H; 270 lbs.
    - Could heat 40'x80' tent, (30 deg. temp rise)
    Optional Accessories
    AR-110 Duct Ring $110
    Duct - HWAG-WD1225
    Remote Thermostat - HWAG-8347NR
    Diffuser for ducting - HWAG-21177
    $3,899.00

  • - Heat Output: 306,000 BTU
- Air Flow: 2,500 CFM
- 2.18 GPH; 27.7 Gallon Tank; 110V, 60 Hz
- Pneumatic Tires, Fuel Gauge, Preheated fuel filter
- Four loop combustion chamber.
- Ducting: (2) 12
    - Heat Output: 306,000 BTU
    - 2.18 GPH; 27.7 Gallon Tank; 110V, 60 Hz
    - Pneumatic Tires, Fuel Gauge, Preheated fuel filter
    - Four loop combustion chamber.
    - Ducting: (2) 12"x12' or one 16"x15'. Adapter Required.
    - 11.4 amp Draw, 175 deg. F heat rise
    - Optional: thermostat, external tank, lift kit, tune-up kit
    - Size: 73"L x 28"W x 41"H; Weight: 264 lbs
    $2,899.00

  • - Heat Output: 306,000 BTU
    - 2.18 GPH; 27.7 Gallon Tank; 110V, 60 Hz
    - Pneumatic Tires, Fuel Gauge, Preheated fuel filter
    - Four loop combustion chamber.
    - Ducting: (2) 12"x12' or one 16"x15'. Adapter Required.
    - 11.4 amp Draw, 175 deg. F heat rise
    - Optional: thermostat, external tank, lift kit, tune-up kit
    - Size: 73"L x 28"W x 41"H; Weight: 264 lbs
    $2,899.00

  • 395K BTU Indirect Fired Oil Heater  - FLAG-FVO-400
    Heat exchanger for external exhaust of combustion products
    - Thermostatically controlled
    - Heavy duty pneumatic tires
    - Slim design for easy site mobility and transportation
    - FVO-400 model has built-in fuel tank
    - Your choice of heating oil, diesel, or kerosene.
    - Warnock-Hersey Approved
    $5,278.00

  • Heat exchanger for external exhaust of combustion products
    - Thermostatically controlled
    - Heavy duty pneumatic tires
    - Slim design for easy site mobility and transportation
    - FVO-400 model has built-in fuel tank
    - Your choice of heating oil, diesel, or kerosene.
    - Warnock-Hersey Approved
    $5,278.00

  • Photo shown with optional Heavy Duty Kit
    $4,999.00 $4,499.00

  • $4,999.00 $4,499.00

  • Quality portable forced airheaters. Propane heaters, kerosene heaters, natural gas heaters and diesel heaters available.
    - Heating oil, kerosene or Diesel Heater
    - Fan Voltage: 110v 25A
    - Watts: 120,000 watts
    - Outlet & Flue Size: 20"/50cm
    - Air Flow: 4700 CFM
    - Size: 75"x40"x53"
    - Heat Rise (ambient: 100 degrees)
    - Warranty: One Year
    $6,468.00

  • - Heating oil, kerosene or Diesel Heater
    - Fan Voltage: 110v 25A
    - Watts: 120,000 watts
    - Outlet & Flue Size: 20"/50cm
    - Air Flow: 4700 CFM
    - Size: 75"x40"x53"
    - Heat Rise (ambient: 100 degrees)
    - Warranty: One Year
    $6,468.00

  • Cantherm 700K BTU Jumbo Indirect Fired Oil Heater
    700K BTU Jumbo Indirect Fired Oil Heater  
    - OIL Fueled (Diesel, Kerosene, Fuel Oil)
    - Two-stage Startup means no cold air delivered
    - Heat Output: 700K BTU
    - 7,420 CFM
    - Standard w/ pneumatic tires, pre heated oil filter
    - 21 AMP Draw at Startup;
    - 25 AMP Circuit Recommended
    - Burner not attached. Some assembly required.

     

    Jumbo 700 Heater Accessories
    $6,999.00

  • 700K BTU Jumbo Indirect Fired Oil Heater  
    - OIL Fueled (Diesel, Kerosene, Fuel Oil)
    - Two-stage Startup means no cold air delivered
    - Heat Output: 700K BTU
    - 7,420 CFM
    - Standard w/ pneumatic tires, pre heated oil filter
    - 21 AMP Draw at Startup;
    - 25 AMP Circuit Recommended
    - Burner not attached. Some assembly required.

     

    Jumbo 700 Heater Accessories
    $6,999.00

  • - OIL Fueled (Diesel, Kerosene, Fuel Oil)
- Two-stage Startup means no cold air delivered
- Heat Output: 900K BTU
- 8,830 CFM
- Standard with pneumatic tires, pre heated oil filter
- 220V; 21 AMP Draw Startup; 25 AMP Circuit Recommended
- Burner not attached. Some assembly required.
- Weight: 793 lbs
    - Two-stage Startup means no cold air delivered
    - Heat Output: - 900,000 BTU
    - Indirect-Fired Fan: 220V
    - 60Hz, single phase or three phase models
    - Air Flow: 8,830 CFM
    - Gas Fuel Consumption: 900 Cubic Feet per Hour.
    - Oil Fuel Consumption: 6.41 Gallons/hour
    - Size: 88"x39"x59"; (With Centrifugal Fan 107"x39"x59")

     

    900K BTU Jumbo Accessories

    $8,499.00

  • - Two-stage Startup means no cold air delivered
    - Heat Output: - 900,000 BTU
    - Indirect-Fired Fan: 220V
    - 60Hz, single phase or three phase models
    - Air Flow: 8,830 CFM
    - Gas Fuel Consumption: 900 Cubic Feet per Hour.
    - Oil Fuel Consumption: 6.41 Gallons/hour
    - Size: 88"x39"x59"; (With Centrifugal Fan 107"x39"x59")

     

    900K BTU Jumbo Accessories

    $8,499.00

  • Chinook-1.2M-skid-heater-trailer
    Chinook 1.2, Fuel, 220Volt/1Ph Fan, Skid-Mounted Burner Set
    BTU/HR: 1,200,000
    Fuel Rate GPH: 8.6 Low Fire GPH: 4.3
    Temp. Rise Deg. F: 200
    Output Air Vol. CFM @ 3"
    SP: 6500
    Power (not self contained): 220V/60Hz/single or 3phase Power (self contained): self pwr/diesel/gen
    Length: 205"
    Width: 81"
    Height: 73"
    Weight: 7000 lbs

  • Chinook 1.2, Fuel, 220Volt/1Ph Fan, Skid-Mounted Burner Set
    BTU/HR: 1,200,000
    Fuel Rate GPH: 8.6 Low Fire GPH: 4.3
    Temp. Rise Deg. F: 200
    Output Air Vol. CFM @ 3"
    SP: 6500
    Power (not self contained): 220V/60Hz/single or 3phase Power (self contained): self pwr/diesel/gen
    Length: 205"
    Width: 81"
    Height: 73"
    Weight: 7000 lbs

  • Chinook heater trailer
    Chinook 1.2, Fuel, 200Volt/1Ph, Trailer w/ tandem axles, lights etc.
    Burner Set BTU/HR: 1,200,000
    Fuel Rate GPH: 8.6 Low Fire GPH: 4.3
    Temp. Rise Deg. F: 200
    Output Air Vol. CFM @ 3"
    SP: 6,500 Power (not self contained): 220V/60Hz/single or 3phase Power (self contained): self pwr/diesel/gen
    Length: 252" Width: 98" Height: 86" Weight: 7000 lbs

  • Chinook 1.2, Fuel, 200Volt/1Ph, Trailer w/ tandem axles, lights etc.
    Burner Set BTU/HR: 1,200,000
    Fuel Rate GPH: 8.6 Low Fire GPH: 4.3
    Temp. Rise Deg. F: 200
    Output Air Vol. CFM @ 3"
    SP: 6,500 Power (not self contained): 220V/60Hz/single or 3phase Power (self contained): self pwr/diesel/gen
    Length: 252" Width: 98" Height: 86" Weight: 7000 lbs

  • Chinook 1.2 Million BTU Gas-Fired Single Phase, 220Volt/1Ph Fan Skid-Mounted Heaters-MAC-1.2M-1PHG-SK
    Chinook 1.2, Gas, 220Volt/1Ph Fan,
    Skid-Mounted Chinook 1.2, Fuel, 220Volt/1Ph Fan,
    Skid-Mounted Burner Set
    BTU/HR: 1,200,000
    Fuel Rate GPH: 8.6 Low Fire GPH: 4.3
    Temp. Rise Deg. F: 200
    Output Air Vol. CFM @ 3" SP: 6500
    Power (not self contained): 220V/60Hz/single or 3phase
    Power (self contained): self pwr/diesel/gen
    Length: 205" Width: 81" Height: 73" Weight: 7000 lbs

  • Chinook 1.2, Gas, 220Volt/1Ph Fan,
    Skid-Mounted Chinook 1.2, Fuel, 220Volt/1Ph Fan,
    Skid-Mounted Burner Set
    BTU/HR: 1,200,000
    Fuel Rate GPH: 8.6 Low Fire GPH: 4.3
    Temp. Rise Deg. F: 200
    Output Air Vol. CFM @ 3" SP: 6500
    Power (not self contained): 220V/60Hz/single or 3phase
    Power (self contained): self pwr/diesel/gen
    Length: 205" Width: 81" Height: 73" Weight: 7000 lbs

  • Chinook  skid mounted heaters
    Chinook 1.2, Fuel, 200Volt/1Ph, Trailer w/ tandem axles, lights etc.
    Burner Set
    BTU/HR: 1,200,000
    Fuel Rate GPH: 8.6 Low Fire GPH: 4.3
    Temp. Rise Deg. F: 200
    Output Air Vol. CFM @ 3" SP: 6,500
    Power (not self contained): 220V/60Hz/single or 3phase Power (self contained): self pwr/diesel/gen
    Length: 252" Width: 98" Height: 86" Weight: 7000 lbs

  • Chinook 1.2, Fuel, 200Volt/1Ph, Trailer w/ tandem axles, lights etc.
    Burner Set
    BTU/HR: 1,200,000
    Fuel Rate GPH: 8.6 Low Fire GPH: 4.3
    Temp. Rise Deg. F: 200
    Output Air Vol. CFM @ 3" SP: 6,500
    Power (not self contained): 220V/60Hz/single or 3phase Power (self contained): self pwr/diesel/gen
    Length: 252" Width: 98" Height: 86" Weight: 7000 lbs

  • Containerized Industrial sized Heating Units up to 4.2 Million BTU. For your most heavy duty Industrial Heating needs.
    Chinook 800K, Kubota/Winco 2400 Watt Gen,
    Trailer w/o brakes/lights Burner Set
    BTU/HR: 800,000
    Fuel Rate GPH: 5.7
    Temp. Rise Deg. F: 200
    Output Air Vol. CFM @ 3" SP: 3900
    Power (self contained): self pwr/diesel/gen
    Power (not self contained): 220Volt/60Hz/single or 3 phase
    Length: 184" Width: 78" Height: 75" Weight: 4,000 lbs

  • Chinook 800K, Kubota/Winco 2400 Watt Gen,
    Trailer w/o brakes/lights Burner Set
    BTU/HR: 800,000
    Fuel Rate GPH: 5.7
    Temp. Rise Deg. F: 200
    Output Air Vol. CFM @ 3" SP: 3900
    Power (self contained): self pwr/diesel/gen
    Power (not self contained): 220Volt/60Hz/single or 3 phase
    Length: 184" Width: 78" Height: 75" Weight: 4,000 lbs

  • Containerized Industrial sized Heating Units up to 4.2 Million BTU. For your most heavy duty Industrial Heating needs.
    Chinook 800K, Kubota/Winco 2400 Watt Gen, Skid Burner Set
    BTU/HR: 800,000
    Fuel Rate GPH: 5.7
    Temp. Rise Deg. F: 200 Output Air Vol. CFM @ 3" SP: 3900
    Power (self contained): self pwr/diesel/gen
    Power (not self contained): 220Volt/60Hz/single or 3 phase
    Length: 184" Width: 78" Height: 75" Weight: 4,000 lbs

  • Chinook 800K, Kubota/Winco 2400 Watt Gen, Skid Burner Set
    BTU/HR: 800,000
    Fuel Rate GPH: 5.7
    Temp. Rise Deg. F: 200 Output Air Vol. CFM @ 3" SP: 3900
    Power (self contained): self pwr/diesel/gen
    Power (not self contained): 220Volt/60Hz/single or 3 phase
    Length: 184" Width: 78" Height: 75" Weight: 4,000 lbs

  • Therm Dynamics TD1200 Flameless Heater
    - Zero Setbacks needed for Volatile Applications
    - Self-Contained - No electrical power needed
    - 1.2 Million BTU/hr; 7,200 CFM; 180º F
    - Can Operate 24/7; Ductable to 100'
    - Optional 400 Gal. Tank, Tandem Axles, Skid Mount, etc.
    - Dry heat: oil rigs, water restoration, mold abatement
    flameless sparkless oil field heaterFrom Therm Dynamics, these flameless, sparkless diesel heaters are the safest heat available for volatile situations. No OSHA type setbacks are required as there are no open flames nor sparks. No generator or other electrical power is necessary. A diesel engine is enclosed in an insulated chamber. Engine torque is converted to heat and combined with the heat of the engine. Totally self contained, these patent-protected oil rig heaters are also popular for other applications requiring heated air and high air flows. These units are also applicable for fire restoration, thermal remediation, pest control and any application where self-powered heat is needed. Technically not a "trailer", they are equippped with lights for safe highway towability.

    Recent Developments for 2011/2012 Heating Season
    Therm Dynamics has added new refinements to a proven concept. Higher precision in manufacturing and design improvements have increased the BTU output as well as dramatically increased the amount of air delivered. The addition of an additional "pusher" fan, now standard equipment on all models, greatly increases static pressure, allowing longer duct lengths, higher CFMs and more heat. New model numbers are similar to previous years but with slight variances denoting the changes. Economical new smaller models are being offered with Kubota engines in addition to the standard Caterpillar powered heaters. Equipmentland is the primary source for information and customization to meet your needs and is the leading provider of heaters for new markets and export.
    This flameless heat generating unit for oil rigs and other demanding applications is a highly efficient and extremely safe alternative for the production of large volumes of heat. Therm Dynamics has developed the patented process of converting and capturing the torque of a diesel engine into heat, and combining it with all the other sources of heat - from the heads, exhaust, cooling system - to make a totally flameless and sparkless heater that provides its own high volume airflow without any electric fans or any other ignition sources, making this the safest heater by far for volatile environments. The flameless heater complies with OSHA regulations on oil fields and other applications.
    Therm Dynamic's patented technology uses diesel power to agitate hydraulic oil in a flameless, sparkless, low-pressure environment to deliver high BTU output and remarkable air flow up to 9,000 CFM. In brief, the Therm Dynamics system converts the engine torque into heat and dissipates it inside an insulated cabinet which also captures the heat produced by the engine heads, cooling system and exhaust. The unit is a Caterpillar-powered specialized heat producing unit which is safer and more trouble free than anything else on the market. The engine's torque heats hydraulic oil in a closed system which the unit extracts the heat and utilizes all the other heat generation aspects of the engine, providing a clean pollution free discharge to the target environment. A direct drive from the diesel engine powers both the patented unit and the integrated fan to provided a robust flow of heated air. Heat output is controlled by simple RPM settings on the diesel engine throttle.

    Fuel economy can be achieved by simply throttling down the RPMs. All controls and auto shutdown systems are provided ensuring safe operation and equipment protection. Safety setback requirements have lessened from typical 70 - 100 ft. to zero for volatile applications. Heater fluid is heated by disc agitation and transported to the unit heat exchanger where heat transfer occurs. Clean heated air can be delivered directly from the unit’s discharge or through attachable flex ducting. A new additional fan provides static pressure higher than ever before.

    The heat generator and engine are enclosed in a locked cabinet complete with automatic shutdown features, floor, and removable doors. Trailer units are mounted on 5300 lb. torsion-bar axle/s with 15" wheels and tires. Skid models are also available. Due to the few moving parts, the potential for failure is minimal. These rig heaters are designed for stand alone, 24-hour trouble free operation. Given the flameless and sparkless nature of the technology, the unit is ideal for oil wellheads, fuel farms, mines, airports and anywhere fire is of concern.

    Equipmentland is the original and primary online provider of flameless heaters by Therm Dynamics. Equipmentland has been instrumental in the development of the largest output models for Therm Dynamics. Contact Equipmentland today for purchasing standard equipment flameless heaters, or let us know if you need a custom unit designed. Equipmentland is the leading exporter of flameless heaters, and is accustomed to arranging deliveries outside the USA.

    NOTE: Current very high demand required ordering in advance.

    Contact Equipmentland for more information, delivery times and pricing.
    Call Equipmentland Today at

  • - Zero Setbacks needed for Volatile Applications
    - Self-Contained - No electrical power needed
    - 1.2 Million BTU/hr; 7,200 CFM; 180º F
    - Can Operate 24/7; Ductable to 100'
    - Optional 400 Gal. Tank, Tandem Axles, Skid Mount, etc.
    - Dry heat: oil rigs, water restoration, mold abatement
    flameless sparkless oil field heaterFrom Therm Dynamics, these flameless, sparkless diesel heaters are the safest heat available for volatile situations. No OSHA type setbacks are required as there are no open flames nor sparks. No generator or other electrical power is necessary. A diesel engine is enclosed in an insulated chamber. Engine torque is converted to heat and combined with the heat of the engine. Totally self contained, these patent-protected oil rig heaters are also popular for other applications requiring heated air and high air flows. These units are also applicable for fire restoration, thermal remediation, pest control and any application where self-powered heat is needed. Technically not a "trailer", they are equippped with lights for safe highway towability.

    Recent Developments for 2011/2012 Heating Season
    Therm Dynamics has added new refinements to a proven concept. Higher precision in manufacturing and design improvements have increased the BTU output as well as dramatically increased the amount of air delivered. The addition of an additional "pusher" fan, now standard equipment on all models, greatly increases static pressure, allowing longer duct lengths, higher CFMs and more heat. New model numbers are similar to previous years but with slight variances denoting the changes. Economical new smaller models are being offered with Kubota engines in addition to the standard Caterpillar powered heaters. Equipmentland is the primary source for information and customization to meet your needs and is the leading provider of heaters for new markets and export.
    This flameless heat generating unit for oil rigs and other demanding applications is a highly efficient and extremely safe alternative for the production of large volumes of heat. Therm Dynamics has developed the patented process of converting and capturing the torque of a diesel engine into heat, and combining it with all the other sources of heat - from the heads, exhaust, cooling system - to make a totally flameless and sparkless heater that provides its own high volume airflow without any electric fans or any other ignition sources, making this the safest heater by far for volatile environments. The flameless heater complies with OSHA regulations on oil fields and other applications.
    Therm Dynamic's patented technology uses diesel power to agitate hydraulic oil in a flameless, sparkless, low-pressure environment to deliver high BTU output and remarkable air flow up to 9,000 CFM. In brief, the Therm Dynamics system converts the engine torque into heat and dissipates it inside an insulated cabinet which also captures the heat produced by the engine heads, cooling system and exhaust. The unit is a Caterpillar-powered specialized heat producing unit which is safer and more trouble free than anything else on the market. The engine's torque heats hydraulic oil in a closed system which the unit extracts the heat and utilizes all the other heat generation aspects of the engine, providing a clean pollution free discharge to the target environment. A direct drive from the diesel engine powers both the patented unit and the integrated fan to provided a robust flow of heated air. Heat output is controlled by simple RPM settings on the diesel engine throttle.

    Fuel economy can be achieved by simply throttling down the RPMs. All controls and auto shutdown systems are provided ensuring safe operation and equipment protection. Safety setback requirements have lessened from typical 70 - 100 ft. to zero for volatile applications. Heater fluid is heated by disc agitation and transported to the unit heat exchanger where heat transfer occurs. Clean heated air can be delivered directly from the unit’s discharge or through attachable flex ducting. A new additional fan provides static pressure higher than ever before.

    The heat generator and engine are enclosed in a locked cabinet complete with automatic shutdown features, floor, and removable doors. Trailer units are mounted on 5300 lb. torsion-bar axle/s with 15" wheels and tires. Skid models are also available. Due to the few moving parts, the potential for failure is minimal. These rig heaters are designed for stand alone, 24-hour trouble free operation. Given the flameless and sparkless nature of the technology, the unit is ideal for oil wellheads, fuel farms, mines, airports and anywhere fire is of concern.

    Equipmentland is the original and primary online provider of flameless heaters by Therm Dynamics. Equipmentland has been instrumental in the development of the largest output models for Therm Dynamics. Contact Equipmentland today for purchasing standard equipment flameless heaters, or let us know if you need a custom unit designed. Equipmentland is the leading exporter of flameless heaters, and is accustomed to arranging deliveries outside the USA.

    NOTE: Current very high demand required ordering in advance.

    Contact Equipmentland for more information, delivery times and pricing.
    Call Equipmentland Today at

  • Flameless Sparkless Diesel Heater, 400k BTU, Towable - TD375
    - Zero Setbacks needed for Volatile Applications
    - Self-Contained - No electrical power needed
    - 400K BTU/hr; 4,000 CFM; 180º F
    - Can Operate 24/7; Ductable to 100'
    - Options: 200 gal. Tank, Skid Mount, Hoses, etc.
    - Dry heat: oil rigs, water restoration, mold abatement

  • - Zero Setbacks needed for Volatile Applications
    - Self-Contained - No electrical power needed
    - 400K BTU/hr; 4,000 CFM; 180º F
    - Can Operate 24/7; Ductable to 100'
    - Options: 200 gal. Tank, Skid Mount, Hoses, etc.
    - Dry heat: oil rigs, water restoration, mold abatement

  • For fire restoration, drying and mold abatement the patented diesel heat system is unmatched
    - Zero Setbacks needed for Volatile Applications
    - Self-Contained - No electrical power needed
    - 1600K BTU/hr; 5,000 CFM; 180º F
    - Can Operate 24/7; Ductable to 100'
    - Options: 200 Gal. Tank, Skid Mount, Hoses etc.
    - Dry heat: oil rigs, water restoration, mold abatement

  • - Zero Setbacks needed for Volatile Applications
    - Self-Contained - No electrical power needed
    - 1600K BTU/hr; 5,000 CFM; 180º F
    - Can Operate 24/7; Ductable to 100'
    - Options: 200 Gal. Tank, Skid Mount, Hoses etc.
    - Dry heat: oil rigs, water restoration, mold abatement

  • Flameless Sparkless Diesel Heater, 750K BTU, Towable - TD750
    - Zero Setbacks needed for Volatile Applications
    - Self-Contained - No electrical power needed
    - 700K BTU/hr; 7,200 CFM; 180º F
    - Can Operate 24/7; Ductable to 100'
    - Optional 400 Gal. Tank, Tandem Axles, Skid Mount, etc.
    - Dry heat: oil rigs, water restoration, mold abatement
    $0.00

  • - Zero Setbacks needed for Volatile Applications
    - Self-Contained - No electrical power needed
    - 700K BTU/hr; 7,200 CFM; 180º F
    - Can Operate 24/7; Ductable to 100'
    - Optional 400 Gal. Tank, Tandem Axles, Skid Mount, etc.
    - Dry heat: oil rigs, water restoration, mold abatement
    $0.00

  • Trekker Radiant Oil Heater - ITR-TREH
    The Trekker is designed to be small (12"W X 16"H X 15" D) and lightweight (16 lbs.) for easy portability. The heater uses a vaporizing burner and is controlled by a fully adjustable fuel regulator. The heat output can be adjusted from 4,000 BTU/h to 12,000 BTU/h (0.12 US gal/h fuel consumption on high). The Trekker also incorporates multiple operational safety features such as a patented non flooding burner, fuel regulator with overheat protection, and a fuel shutoff valve. A galvanized heat shield is attached to the heater to protect the user from incidental contact.

    - 4,000 to 12,000 BTU
    - Natural Draft Vaporizing Burner
    - No Electricity Required
    - Heats 160 - 760 sq ft room w/ 8' ceiling
    - 3" Exhaust, Heat Shield, Cleaning Tool
    - CSA Certified, UL standards
    - 12" W x 1
    $468.00

  • The Trekker is designed to be small (12"W X 16"H X 15" D) and lightweight (16 lbs.) for easy portability. The heater uses a vaporizing burner and is controlled by a fully adjustable fuel regulator. The heat output can be adjusted from 4,000 BTU/h to 12,000 BTU/h (0.12 US gal/h fuel consumption on high). The Trekker also incorporates multiple operational safety features such as a patented non flooding burner, fuel regulator with overheat protection, and a fuel shutoff valve. A galvanized heat shield is attached to the heater to protect the user from incidental contact.

    - 4,000 to 12,000 BTU
    - Natural Draft Vaporizing Burner
    - No Electricity Required
    - Heats 160 - 760 sq ft room w/ 8' ceiling
    - 3" Exhaust, Heat Shield, Cleaning Tool
    - CSA Certified, UL standards
    - 12" W x 1
    $468.00