Loading... Please wait...

Categories

 

 

 

 

 

Sucuri Security

AGL Laser Level

Helicopter Heaters

Cantherm Helicopter Heating Supplies

These heaters are rapidly becoming the heater of choice for cold-weather helicopter heating. Arcotherm heaters are used in many sizes depending on need. All heaters are indirect-fired oil, so they can be used indoors (vented to outside) or outdoors heating interior and/or exterior areas. The EC series is lightweight, robust and affordable. Tires are oversize so they can more easily be pulled through snow. Ducting, splitters and adapters are available in many configurations. From 20,000 to 650,000 BTU models.

helicopter-heaters.jpg

Helicopter Heating and Heating Supplies

 

 

ec100-tn.jpg

Helicopter Heater Accessories
 EC Heater Accessories
 
 Jumbo Helicopter Heater Accessories
 
   

  • 113K BTU Indirect Fired Oil Heater CAN EC100
    - Heat Output: 113,000 BTU - Air Flow: 880 CFM; Heat Rise 150 deg. F. - .81 GPH; 11.9 Gallon Tank; 110 V - Pneumatic Tires, Fuel Gauge, Preheated fuel filter std. - Uses 11

    - Heat Output: 113,000 BTU
    - Air Flow: 880 CFM; Heat Rise 150 deg. F.
    - Heat Output: 113,000 BTU
    - Air Flow: 880 CFM; Heat Rise 150 deg. F.
    - .81 GPH; 11.9 Gallon Tank; 110 V
    - Pneumatic Tires, Fuel Gauge,
    - Preheated fuel filter std.
    - Uses 12" x 12' Pin-Lock Duct;
    - No adapter needed
    - 94 lbs.
    $1,699.00 $1,683.00
    Add To Cart

  • 113K BTU Indirect Fired Oil Heater CAN EC100

    - Heat Output: 113,000 BTU
    - Air Flow: 880 CFM; Heat Rise 150 deg. F.
    - Heat Output: 113,000 BTU
    - Air Flow: 880 CFM; Heat Rise 150 deg. F.
    - .81 GPH; 11.9 Gallon Tank; 110 V
    - Pneumatic Tires, Fuel Gauge,
    - Preheated fuel filter std.
    - Uses 12" x 12' Pin-Lock Duct;
    - No adapter needed
    - 94 lbs.
    $1,699.00 $1,683.00
    Add To Cart

  • 219K BTU Indirect Fired Oil Heater CAN EC200
    - Heat Output: 219,000 BTU - Air Flow: 1,530 CFM; Heat Rise 150 deg. F. - 1.56 GPH; 17.2 Gallon Tank; 110V, 60 Hz - Pneumatic Tires, Fuel Gauge, Preheated fuel filter - Four loop combustion chamber. - Ducting: can use three 6

    - Air Flow: 1,530 CFM; Heat Rise 150 deg. F.
    - 1.56 GPH; 17.2 Gallon Tank;
    - 110V, 60 Hz
    - Pneumatic Tires, Fuel Gauge,
    - Preheated fuel filter
    - Four loop combustion chamber.
    - Duct adapter required.
    - Optional: thermostat, lift kit
    - Weight: 176 lbs
    - Heat Output: 219,000 BTU
    $2,499.00 $2,463.00
    Add To Cart

  • 219K BTU Indirect Fired Oil Heater CAN EC200

    - Air Flow: 1,530 CFM; Heat Rise 150 deg. F.
    - 1.56 GPH; 17.2 Gallon Tank;
    - 110V, 60 Hz
    - Pneumatic Tires, Fuel Gauge,
    - Preheated fuel filter
    - Four loop combustion chamber.
    - Duct adapter required.
    - Optional: thermostat, lift kit
    - Weight: 176 lbs
    - Heat Output: 219,000 BTU
    $2,499.00 $2,463.00
    Add To Cart

  • 306K BTU Indirect Fired Oil Heater CAN EC300
    - Heat Output: 306,000 BTU - Air Flow: 2,500 CFM - 2.18 GPH; 27.7 Gallon Tank; 110V, 60 Hz - Pneumatic Tires, Fuel Gauge, Preheated fuel filter - Four loop combustion chamber. - Ducting: (2) 12

    - Heat Output: 306,000 BTU
    - 2.18 GPH; 27.7 Gallon Tank; 110V, 60 Hz
    - Pneumatic Tires, Fuel Gauge, Preheated fuel filter
    - Four loop combustion chamber.
    - Ducting: (2) 12"x12' or one 16"x15'.
    - Duct Adapter Required.
    - 11.4 amp Draw, 175 deg. F heat rise
    - Optional: thermostat, external tank, lift kit,
    - Size: 73"L x 28"W x 41"H;
    - Weight: 264 lbs
    $2,899.00 $2,863.00
    Add To Cart

  • 306K BTU Indirect Fired Oil Heater CAN EC300

    - Heat Output: 306,000 BTU
    - 2.18 GPH; 27.7 Gallon Tank; 110V, 60 Hz
    - Pneumatic Tires, Fuel Gauge, Preheated fuel filter
    - Four loop combustion chamber.
    - Ducting: (2) 12"x12' or one 16"x15'.
    - Duct Adapter Required.
    - 11.4 amp Draw, 175 deg. F heat rise
    - Optional: thermostat, external tank, lift kit,
    - Size: 73"L x 28"W x 41"H;
    - Weight: 264 lbs
    $2,899.00 $2,863.00
    Add To Cart

  • 400K BTU Indirect Fired Oil Heater CAN PHOEN 400 HC
    Photo shown with optional Heavy Duty Kit

    -Heat output:400K BTU high/260K BTU low
    -Air Flow:3,250 CFM; Heat Rise 165 deg. F.
    -Fuel Consumption: 2.85 GPH high; 1.94 GPH low;
    -56 Gallon Tank standard equipment
    -110V, 60 Hz. 15 Amp (startup)
    -Approx 7 amp running
    -Pneumatic Tires, Fuel Gauge
    -Preheated fuel filter
    -Four loop combustion chamber
    -Optional Recirculation Kit
    -Two Fans for Higher static pressures
    -26" x 47" x 74"; Weight: 507 lbs.
    $5,199.00 $5,093.00
    Select Options

  • 400K BTU Indirect Fired Oil Heater CAN PHOEN 400 HC

    -Heat output:400K BTU high/260K BTU low
    -Air Flow:3,250 CFM; Heat Rise 165 deg. F.
    -Fuel Consumption: 2.85 GPH high; 1.94 GPH low;
    -56 Gallon Tank standard equipment
    -110V, 60 Hz. 15 Amp (startup)
    -Approx 7 amp running
    -Pneumatic Tires, Fuel Gauge
    -Preheated fuel filter
    -Four loop combustion chamber
    -Optional Recirculation Kit
    -Two Fans for Higher static pressures
    -26" x 47" x 74"; Weight: 507 lbs.
    $5,199.00 $5,093.00
    Select Options

  • Cotton Canvas Ducting 12 in. x 12 ft CAN 12X12
    Canvas Ducting 12

    - Standard Duct for the EC Series heaters
    - Also works with Jumbo Models
    - Metal Pin-Lock collars
    - Can be hooked in tandem per static pressure capacity of heater
    - Extra-durable cotton canvas ducting.
    - For high abrasive applications
    - 20 lbs. ea.
    $163.00
    Add To Cart

  • Cotton Canvas Ducting 12 in. x 12 ft CAN 12X12

    - Standard Duct for the EC Series heaters
    - Also works with Jumbo Models
    - Metal Pin-Lock collars
    - Can be hooked in tandem per static pressure capacity of heater
    - Extra-durable cotton canvas ducting.
    - For high abrasive applications
    - 20 lbs. ea.
    $163.00
    Add To Cart

  • EC 200 1 Way Duct Adapter (12 in)
    EC 200 1 Way Duct Adapter (12 in)
    For retrofitting existing EC heaters to accept Ducting
    Add this collar which necks down the EC series heaters to 12" to accept J-Lock, Pin-Lock or Belted Cuff Ducting.
    - With Metal J-Lock collars unless specified otherwise

    The EC Collar is provided at no charge for new EC Heaters.
    $153.00
    Add To Cart

  • EC 200 1 Way Duct Adapter (12 in)
    For retrofitting existing EC heaters to accept Ducting
    Add this collar which necks down the EC series heaters to 12" to accept J-Lock, Pin-Lock or Belted Cuff Ducting.
    - With Metal J-Lock collars unless specified otherwise

    The EC Collar is provided at no charge for new EC Heaters.
    $153.00
    Add To Cart

  • Flameless Sparkless Diesel Heater 125K BTU TD100
    Flameless Sparkless Diesel Heater 125K BTU TD100

    - Sparkless, no generator or electric power needed
    - Isuzu 3CA1, 3-cycle engine, diesel #2 powered
    - 125+K BTU/hr; 1,600 CFM; 180º F Exit Temp
    - Stand-Alone, No generator or electric power needed 
    - 90+% Efficiency; 1 GPH; 42 Gal. Tank
    - Outlet Temperature: 180ºF (82.2ºC)
    - Duct to 100': One 12" port - 2.25" Static Pressure

  • Flameless Sparkless Diesel Heater 125K BTU TD100

    - Sparkless, no generator or electric power needed
    - Isuzu 3CA1, 3-cycle engine, diesel #2 powered
    - 125+K BTU/hr; 1,600 CFM; 180º F Exit Temp
    - Stand-Alone, No generator or electric power needed 
    - 90+% Efficiency; 1 GPH; 42 Gal. Tank
    - Outlet Temperature: 180ºF (82.2ºC)
    - Duct to 100': One 12" port - 2.25" Static Pressure

  • Flameless Sparkless Diesel Heater 250K BTU TD250
    Flameless, Sparkless portable Diesel Heater TD-250

    - Sparkless, no generator or electric power needed
    - Isuzu 3CA1, 3-cycle engine, diesel #2 powered
    - 250+K BTU/hr; 1,600 CFM; 180º F Exit Temp
    - Stand-Alone, No generator or electric power needed 
    - 90+% Efficiency; 1 GPH; 42 Gal. Tank
    - Outlet Temperature: 180ºF (82.2ºC)
    - Duct to 100': One 12" port - 2.25" Static Pressure

  • Flameless Sparkless Diesel Heater 250K BTU TD250

    - Sparkless, no generator or electric power needed
    - Isuzu 3CA1, 3-cycle engine, diesel #2 powered
    - 250+K BTU/hr; 1,600 CFM; 180º F Exit Temp
    - Stand-Alone, No generator or electric power needed 
    - 90+% Efficiency; 1 GPH; 42 Gal. Tank
    - Outlet Temperature: 180ºF (82.2ºC)
    - Duct to 100': One 12" port - 2.25" Static Pressure