- For reaching to greater depths
- Extends as you dig. You can easily set the depth adjustment to one foot intervals.
- 110 lbs.An included quick-disconnect bar suspends the unit when in the hole to make adjustments simple.
- Available with 2" hex (Belltec), 2" square and 2 1/2" round connectors.
- Units usually ship within 2 days.

Recommended for 50 HP (29hp minimum)
- For Three Point Tractors with two remote hydraulic valves
- Fits Category 1 Tractors
- Screw Type Leveling Brace
- Solid Steel Stem in Auger tube
- Drills to 60"

Recommended for 50 HP (29hp minimum)
- For Three Point Tractors with two remote hydraulic valves
- Fits Category 3 Tractors
- Screw Type Leveling Brace
- Solid Steel Stem in Auger tube
- Drills to 60"

2 in Round Coupler

2-9/16 in Melroe-style Coupler

Belltec 2 x 8 in Hex Coupler

- Light Duty: for 6" and 9" dia. augers, 32" or 44" length
- For Category 1 three-point
- PTO speed not to exceed 540 RPM
- 2-1/2" steel pipe frame. No Guide Lever
- 2" round output shafts, augers secured by a collar and two 1/2" bolts
- Warranty: Gearbox: 5-year limited; Materials/Workmanship: One-year

- For Category 1 and 2, 3-Point Hitch via reversible pins, w/ Easy On/Off - Guide lever included
- PTO speed not to exceed 540 RPM
- Crane size is 3" pipe with a 1500 pound lift capacity
- Augers available in 32" or 44" lengths to 24" dia.
- Heavy duty drive shaft protected by shear pin
- Optional scarifier tip for digging loose rock and caliche available for 9" & 12" augers
- 2" round output shafts, augers secured by a collar and two 1/2" bolts
- Warranty: Gearbox: 5-year limited, Materials/Workmanship: One-year

- Standard Duty: for Augers to 12:" dia., 32" length
- For Category 1 three-point
- PTO speed not to exceed 540 RPM
- 2-1/2" steel pipe frame. Guide Lever Included
- 2" round output shafts, augers secured by a collar and two 1/2" bolts
- Warranty: Gearbox: 5-year limited; Materials/Workmanship: One-year

Equipped with full length auger flighting and straight, "E" series
- Bolt-on type earth blades.
- Flighting OD:2-1/4"
- Cutting Dia:2.5"
- Digging Depth:30"
- Drive (" round):1"
- Weight (lbs):8

Equipped with full length auger flighting and straight, "E" series
Bolt-on type earth blades.
Flighting OD:4"
Cutting Dia:5.2"
Digging Depth:30"
Drive (" round):1"
Weight (lbs):12

Equipped with full length auger flighting and straight, "E" series
Bolt-on type earth blades.
Flighting OD:8"
Cutting Dia:9.5"
Digging Depth:30"
Drive (" round):1"
Weight (lbs):20

- Engine: Subaru EH035, 1.6 HP, 33.5 cu. in.
- Lo Tone with Spark Arrester Muffler
- Hand Rewind Starter
- Fueled with gasoline, 4-cycle, 211 Position
- Resistor Type Spark Plug
- Weight 18 lbs; Shipping weight 28 lbs. 
- For use with 2135 Series Augers

- 3000 Ft.Lbs. Max. Output Torque
- 15-30 GPM @ < 3,000 PSI
- 36in. Max Auger Diameter for Rock
- 36in. Max Auger Diameter for Dirt
- **MOUNTING KITS REQUIRED

- 4091 Ft.Lbs. Max. Output Torque
- 25-45 GPM @ < 3,000 PSI
- 36in. Max Auger Diameter for Rock
- 36in. Max Auger Diameter for Dirt
- MOUNTING KITS REQUIRED

Recommended for 50 HP (29hp minimum)
- For Three Point Tractors with two remote hydraulic valves

- 2000 Ft.Lbs. Max. Output Torque
- 10-20 GPM @ < 3,000 PSI
- 24in. Max Auger Diameter for Rock
- 30in. Max Auger Diameter for Dirt
- MOUNTING KITS REQUIRED

- 3500 Ft.Lbs. Max. Output Torque
- 20-35 GPM @ < 3,000 PSI
- 36in. Max Auger Diameter for Rock
- 36in. Max Auger Diameter for Dirt
- MOUNTING KITS REQUIRED

- 1777 Ft.Lbs. Max. Output Torque
- 10-20 GPM @ < 3,000 PSI
- 9in. Max Auger Diameter for Rock
- 12in. Max Auger Diameter for Dirt
- MOUNTING KITS REQUIRED

- 32 cc, 1.6 h.p. Double Stage Reduction
- Reduction Ratio: 41:1
- Fuel Tank Size: 30.4 Fl. Oz. (900 cc)
- S-Start system reduces the amount of pull-force required by 40 percent
- Sound Reduction System
- Auger Bits Sold Separately

- 50 cc, 2.5 h.p. Tanaka two-stroke engine
- 33:1 gear reduction
- 1" round output shaft - Dual safety throttles
- One-year commercial / rental warranty
- Auger Bits Sold Separately