Loading... Please wait...

Categories

Used Chinook Heater


Beltec TM48 Post Hole Digger

TM48 Post Hole Digger from Belltec

TM48 Post Hole Digger mounts easily on three-point tractors with over 28 horsepower which have at least two hydraulic remote valves.

Convert your 3-point tractor to a hole drilling machine.

TM48 AUGER GEAR DRIVE Belltek Auger tm48
     

Belltec Industries TM48 Post Hole Digger mounts easily on three-point tractors with over 28 horsepower which have at least two hydraulic remote valves. Our machine's design and performance go way beyond today's tractor mounted post hole diggers.

The unique system transforms a three-point tractor into a drilling machine capable of doing what the big truck rigs do: drill accurate, straight holes (to a depth of 5 ft on a single auger) in almost any drilling condition, including solid rock and concrete.

 


 Belltec TM48 post hole digger  

 Frame-Guided Auger System

Twin hydraulic cylinders connect the auger carriage to the mainframe of the machine. The cylinders move the carriage up and down the mainframe slides.

Adjustable feet on the mainframe may be leveled. Since the auger is guided into the ground by the mainframe, as long as the mainframe is straight and the carriage is level, the machine will drill straight holes.

The hydraulic cylinders are directly connected to the Gear Drive-Auger Carriage without any leverage or linkage. This gives much better control over the auger in rocks, roots or soft ground. If the cylinders are moved 1", so is the auger.

Movement is not multiplied by leverage or slack in linkage. The operator is much less likely to corkscrew the auger through a root or in soft ground.

     
tm-48 auger
 



Gear Drive

The auger is powered by a heavy duty gearbox.

The gearbox is protected by an automatic torque limiter within the P.T.O. shaft which instantly relieves torque when overloaded and automatically resets itself as soon as P.T.O. speed is reduced. This eliminates troublesome shear pins and down time because of broken P.T.O. shafts and cross kits.

     

 

Adjustable Relief Valve

Allows you to adjust down pressure to the weight of the tractor.
     
tm 48 hydraulic auger
 
Down Pressure

Utilizing the tractor's weight through these unique Locking Arms, apply up to 4500 lbs down-pressure can be supplied by opposing twin hydraulic cylinders. This eliminates the need for anyone to "ride" the machine risking injury. Down pressure also helps keep teeth sharp.

  • Light Duty Post Hole Digger Auger Drives to Heavy Duty Post Hole Digger Auger Drives for your Skid Steer
    - Bullet Series Augers - SRA Rock Auger
    - Single or Double Row Teeth Available
    - Dia. 4.5" to 36"
    - 48" Over-all length
    - Pilots and teeth available

    Please specify when inquiring:
    A = 2" Round
    B = 2-9/16" Round
    C = 2"Hex

    $665.00

  • - Bullet Series Augers - SRA Rock Auger
    - Single or Double Row Teeth Available
    - Dia. 4.5" to 36"
    - 48" Over-all length
    - Pilots and teeth available

    Please specify when inquiring:
    A = 2" Round
    B = 2-9/16" Round
    C = 2"Hex

    $665.00

  • TM48 3-pt tractor hole digger
    - Recommended for 50 HP (29hp minimum) tractors
    - One valve for twin cylinders creating down pressure
    - Second valve for leveling fore an aft by hydraulics
    - Third valve for even additional leveling
    - Drills holes to 60", even solid rock with correct auger
    - Rigid frame w/ hydraulic down pressure w/ relief valve.
    - Heavy Duty Drive Line automatic release if overloaded.
    - Hoses and fittings to attach to tractor remote outlets
    - Hose quick couplers furnished
    - Adjustable Skids
    - Uses Belltec 2" Hex-drive, Extensions and Couplers
    - Weight: 1,100 lbs. plus auger/s
    $5,195.00

  • - Recommended for 50 HP (29hp minimum) tractors
    - One valve for twin cylinders creating down pressure
    - Second valve for leveling fore an aft by hydraulics
    - Third valve for even additional leveling
    - Drills holes to 60", even solid rock with correct auger
    - Rigid frame w/ hydraulic down pressure w/ relief valve.
    - Heavy Duty Drive Line automatic release if overloaded.
    - Hoses and fittings to attach to tractor remote outlets
    - Hose quick couplers furnished
    - Adjustable Skids
    - Uses Belltec 2" Hex-drive, Extensions and Couplers
    - Weight: 1,100 lbs. plus auger/s
    $5,195.00

  • The TM 48 post hole diggers will fit your three point tractor. The post hole digger works on category one, two, or three tractors.

    Extra heavy duty rock & dirt augers for drilling dirt, clay, fractured rock, solid rock and concrete.
    - TM-48 RAD SERIES
    - Diameter: 4.5" to 18" diameter
    - Carbide bullet style teeth
    - 3.5” highstrength tube
    - 3/4″ double flight boring head
    - Augers starting at $625
    $625.00


  • Extra heavy duty rock & dirt augers for drilling dirt, clay, fractured rock, solid rock and concrete.
    - TM-48 RAD SERIES
    - Diameter: 4.5" to 18" diameter
    - Carbide bullet style teeth
    - 3.5” highstrength tube
    - 3/4″ double flight boring head
    - Augers starting at $625
    $625.00

  • TM48 Extra Heavy Duty Cast Head Augers 4.5 to 18 in Dia.
    Belltec TM48 Cast Head Augers

    For use with Extra Heavy Duty Dirt Augers. Extra heavy duty dirt augers for drilling dirt, clay and fractured rock.
    Steel Teeth

    Diameter SKU MSRP
    4.5" BEL-A04510 $ 545
    6" BEL-A06010 $ 735
    8" BEL-A08010 $ 810
    9" BEL-A09010 $ 825
    10" BEL-A10010 $ 835
    15" BEL-A15010 $ 960
    18" BEL-A18010 $ 1285
    $545.00

  • Belltec TM48 Cast Head Augers

    For use with Extra Heavy Duty Dirt Augers. Extra heavy duty dirt augers for drilling dirt, clay and fractured rock.
    Steel Teeth

    Diameter SKU MSRP
    4.5" BEL-A04510 $ 545
    6" BEL-A06010 $ 735
    8" BEL-A08010 $ 810
    9" BEL-A09010 $ 825
    10" BEL-A10010 $ 835
    15" BEL-A15010 $ 960
    18" BEL-A18010 $ 1285
    $545.00


Call EQUIPMENTLAND Today!