Hole Diggers, 3-Point PTO Driven for Farm Tractors

- 1-3/8 21 spline 1000 RPM PTO tractor yoke.
- Recommended PTO HP: 35 min
- 180 HP shear pin Drive shaft

- 1-3/4 20-spline 1000 RPM PTO tractor yoke.
- Recommended PTO HP: 35 min
- 180 HP shear pin Drive shaft
- Left Side Ditching Only

- 1-3/8 6 spline 540 RPM PTO tractor yoke.
- Recommended PTO HP: 35 min
- 180 HP shear pin Drive shaft

ADA Series Auger for pendulum style 3 point diggers

ADA Series Auger for pendulum style 3 point diggers

ADA Series Auger for pendulum style 3 point diggers

ADA Series Auger for pendulum style 3 point diggers

ADA Series Auger for pendulum style 3 point diggers

ADA Series Auger for pendulum style 3 point diggers

Recommended for 50 HP (29hp minimum)
- For Three Point Tractors with two remote hydraulic valves
- Fits Category 1 Tractors
- Screw Type Leveling Brace
- Solid Steel Stem in Auger tube
- Drills to 60"

Recommended for 50 HP (29hp minimum)
- For Three Point Tractors with two remote hydraulic valves
- Fits Category 3 Tractors
- Screw Type Leveling Brace
- Solid Steel Stem in Auger tube
- Drills to 60"

- Recommended for 50 HP (29hp minimum) tractors
- For Three Point Tractors with three remote hydraulic
- One valve for twin cylinders creating down pressure
- Second valve for leveling fore and aft by hydraulic cylinder to fit in place of manual top link
- Third valve for even additional leveling
- Drills holes to 60", even solid rock with correct auger
- Rigid frame with hydraulic down pressure with relief valve.
- Heavy Duty Drive Line: automatic release when overloaded.
- Hoses and fittings to attach to tractor remote outlets
- Hose quick couplers furnished
- Adjustable Skids
- Uses Belltec 2" Hex-drive, Extensions and Couplers

- Heavy-duty Pendulum-type Digger
- Guide Lever Included
- Heavy-duty power shaft with shear pin; Gearbox Slip Clutch Optional
- For Category I amd II 3-Point Hitch; PTO speed not to exceed 540 RPM
- 2" round output shafts, augers secured by a collar and two 1/2" bolts
- Augers available in 32" or 44" lengths to 36" dia
- Bolt-on hard surfaced edges easily removed for sharpening - Inexpensive replacement on auger sizes up to 12"
- Lift Crane is made of 3" steel pipe that will lift up to 2,000 pounds
- Warranty: Gearbox: 5-year limited, Materials/Workmanship: One-year

- Category I Three Point Only
- No Guide Lever
- PTO speed not to exceed 540 RPM
- Crane size is 3" pipe with a 1500 pound lift capacity
- Augers available in 32" or 44" lengths to 24" dia.
- Heavy duty drive shaft protected by shear pin.
- Optional scarifier tip for digging loose rock and caliche available for 9" & 12" augers
- 2" round output shafts, augers secured by a collar and two 1/2" bolts
- Warranty: Gearbox: 5-year limited, Materials/Workmanship: One-year

- Category II & III hitch system
- 1/4" thick X 24" diameter. blade.
- 6 bolt 6" bolt hub, circle rated for 4570 lbs.

- Recommended for 50 HP (29hp minimum) tractors
- For Three Point Tractors with three remote hydraulic
- One valve for twin cylinders creating down pressure
- Second valve for leveling fore and aft by hydraulic cylinder to fit in place of manual top

- 3000 Ft.Lbs. Max. Output Torque
- 15-30 GPM @ < 3,000 PSI
- 36in. Max Auger Diameter for Rock
- 36in. Max Auger Diameter for Dirt
- MOUNTING KITS REQUIRED

- 1419 Ft.Lbs. Max. Output Torque
- 6-15 GPM @ < 3,000 PSI
- 18in. Max Auger Diameter for Dirt
- MOUNTING KITS REQUIRED

- 2623 Ft.Lbs. Max. Output Torque
- 15-30 GPM @ < 3,000 PSI
- 12in. Max Auger Diameter for Rock
- 36in. Max Auger Diameter for Dirt
- Weight: 148 lbs MOUNTING KITS REQUIRED