- For reaching to greater depths
- Extends as you dig. You can easily set the depth adjustment to one foot intervals.
- 110 lbs.An included quick-disconnect bar suspends the unit when in the hole to make adjustments simple.
- Available with 2" hex (Belltec), 2" square and 2 1/2" round connectors.
- Units usually ship within 2 days.

Recommended for 50 HP (29hp minimum)
- For Three Point Tractors with two remote hydraulic valves
- Fits Category 2 Tractors
- Screw Type Leveling Brace
- Solid Steel Stem in Auger tube
- Drills to 60"

CAT 2 Hitch spacer kit for 32" spacing

2-1/2 in Hex Coupler

2 in x 16 in Hex Coupler Shaft for HD ext. shaft only

- 13 HP Honda engine
- Max Driling Torque: 276 ft. lbs. at 2000 PSI
-144 RPM, no load
- 8 GPM System flow at 2000 PSI
- Holds 5 Gallons regular gasoline.
- Quick attach towbar complete with SAE Class II coupler
- 440 lbs

- Heavy-duty Pendulum-type Digger
- Guide Lever Included
- Heavy-duty power shaft with shear pin; Gearbox Slip Clutch Optional
- For Category I amd II 3-Point Hitch; PTO speed not to exceed 540 RPM
- 2" round output shafts, augers secured by a collar and two 1/2" bolts
- Augers available in 32" or 44" lengths to 36" dia
- Bolt-on hard surfaced edges easily removed for sharpening - Inexpensive replacement on auger sizes up to 12"
- Lift Crane is made of 3" steel pipe that will lift up to 2,000 pounds
- Warranty: Gearbox: 5-year limited, Materials/Workmanship: One-year

- Category I Three Point Only
- No Guide Lever
- PTO speed not to exceed 540 RPM
- Crane size is 3" pipe with a 1500 pound lift capacity
- Augers available in 32" or 44" lengths to 24" dia.
- Heavy duty drive shaft protected by shear pin.
- Optional scarifier tip for digging loose rock and caliche available for 9" & 12" augers
- 2" round output shafts, augers secured by a collar and two 1/2" bolts
- Warranty: Gearbox: 5-year limited, Materials/Workmanship: One-year

- 27 cc, 1.4 h.p. PureFire two-stroke engine
- 20:1 gear reduction
- Includes 1/2 inch Keyless chuck
- Powered reversing feature
- Dual position padded front handle
- Heavy-duty fuel tank protector
- Two-year commercial use warranty / Three-year consumer use warranty / One-year rental use warranty

Equipped with full length auger flighting and straight, "E" series
- Bolt-on type earth blades.
- Flighting OD:3-1/4"
- Cutting Dia:3.5"
- Digging Depth:30"
- Drive (" round):1"
- Weight (lbs): 9

Equipped with full length auger flighting and straight, "E" series, bolt-on type earth blades.
Flighting OD:6"
Cutting Dia:7.5"
Digging Depth:30"
Drive (" round):1"
Weight (lbs):15

Flighting OD:18"
Cutting Dia.:19.5"
Digging Depth:3'

- 2000 Ft.Lbs. Max. Output Torque
- 10-20 GPM @ < 3,000 PSI
- 24in. Max Auger Diameter for Rock
- 30in. Max Auger Diameter for Dirt
-  *MOUNTING KITS REQUIRED

- 3500 Ft.Lbs. Max. Output Torque
- 20-35 GPM @ < 3,000 PSI
- 36in. Max Auger Diameter for Rock
- 36in. Max Auger Diameter for Dirt
 * Mounting Kit Required *

- 5256 Ft.Lbs. Max. Output Torque
- 30-60 GPM @ < 3,000 PSI
- 48in. Max Auger Diameter for Rock
- 48in. Max Auger Diameter for Dirt
- *MOUNTING KITS REQUIRED

- 27 cc, 1.4 h.p. PureFire two-stroke engine
- 8:1 gear reduction
- Fuel Tank Size: 22.7 Fl. Oz.
- Includes 1/2 inch Keyless chuck
- Two-year commercial use warranty / Three-year consumer use warranty / One-year rental use warranty

- 3000 Ft.Lbs. Max. Output Torque
- 15-30 GPM @ < 3,000 PSI
- 36in. Max Auger Diameter for Rock
- 36in. Max Auger Diameter for Dirt
- MOUNTING KITS REQUIRED

- 1419 Ft.Lbs. Max. Output Torque
- 6-15 GPM @ < 3,000 PSI
- 18in. Max Auger Diameter for Dirt
- MOUNTING KITS REQUIRED

- 2623 Ft.Lbs. Max. Output Torque
- 15-30 GPM @ < 3,000 PSI
- 12in. Max Auger Diameter for Rock
- 36in. Max Auger Diameter for Dirt
- Weight: 148 lbs MOUNTING KITS REQUIRED

Drive Stem for TM48 Series Cat 1, 2, and 3 Machines.

- Honda GXV160, 4-cycle; 5 HP @ 3600 RPM
- Lo Tone type muffler
- Driveshaft connection to auger is 1 3/8" hexagon,
- Uses 2" up to 18" diameter augers; Series 4400 and 550 augers
- Weight is 71 lbs.