2200 lb. Capacity 3 Point Bale Stabbers and Carriers-Single Tine
- 2200 lb. Capacity
- Fits Category 2, 3N, 3

* NOTE: A mounting kit is required for this item.
- Five foot wide with 1" tines on 3/4" spacing
- Sifts Rocks in Horse Arenas, Landscaping and Job Sites
- For lightweight tractors under 35 HP
- Dimensions: 48"W x 29"D x 19"H
- Weight: 650lbs approx.
- Approximate 10-12 day lead time
* Mounting kit is required.

- Universal Skid Steer Mounting Bracket
- 4400 lb. capacity
- Fully tapered tines
- Tapered socket provides support for spear
Please specify the year and model of your loader in the comments area of the order form.You will be advised of shipping charges before processing.

- Mounting Kit Included
- Five foot wide with 1" tines on 3/4" spacing
- Sifts Rocks in Horse Arenas, Landscaping and Job Sites
- For lightweight Skid Steers
- Dimensions: 60"W x 29"D x 19"H
- Approximate 10-12 day lead time.

* NOTE: A mounting kit is required for this item.
- Six foot wide with 1" tines on 3/4" spacing
- Sifts Rocks in Horse Arenas, Landscaping and Job Sites
- For lightweight tractors under 35 HP
- Dimensions: 72"W x 29"D x 19"H
- Approximate 10-12 day lead time

6000 lb. Capacity 3 Point Bale Stabbers 10 ft. Double Bale for 3 Point
- MDS-3DBC-22-10
- 6000 lb. Capacity
- Fits Category 2, 3N, 3

* NOTE: A mounting kit is required for this item.
- Seven foot wide with 1" tines on 3/4" spacing
- Sifts Rocks in Horse Arenas, Landscaping and Job Sites
- For lightweight tractors under 35 HP
- Dimensions: 84"W x 29"D x 19"H
- Approximate 10-12 day lead time
* Mounting kit is required.

- Stand not included
- 1 inch brass valves.
- 2 inch lockable fill port
- Drip tray
- Sight gauge with brass fittings and clear hose
- 24" wide, 36" high, 24" deep
- Weight: 99 lbs.

Agco FL600 to Uni-Tach Adapter

Allied 495, 595, and 695 QT Rock Bucket Bolt on Mounting Kit

Allied 2495, 2595, 2596, 2795, 2895 Quik-Tach Series Rock Bucket Bolt on Mounting Kit

Allied 395 QT Rock Bucket Bolt on Mounting Kit

Allied 895 & 995 QT Loaders to Uni-Tach Adapter

Allied 395 to Uni-Tach Adapter

Additional Tine for MDS-GF-4 Quick Tach Grapple Fork
- Made of High Carbon T-1 Steel
- Add as needed to Grapple Fork

Bush Hog 2426, 2446, 2846 QT Series Rock Bucket Bolt on Mounting Kit

Bush Hog 2346 QT Series Rock Bucket Bolt on Mounting Kit

Bush Hog 2426, 2446 & 2846 QT Series to Uni-Tach Adapter

Bush Hog 2346 QT Series to Uni-Tach Adapter

Case IH L300, IH 510, IH 520 QT Loaders Rock Bucket Bolt on Mounting Kit

Case IH LX 156, 162, 172 Series Loaders Rock Bucket Bolt on Mounting Kit

Case IH 710 & IH 890

Case IH L300, IH 510 & IH 520 QT Loaders to Uni-Tach Adapter

- Turn your MDS pallet fork into a bale stabber in seconds.
- Just remove your pallet fork tines and replace with this stabber.
- Fits onto any Class II ITA Rail Pallet Fork
- Standard Class II ITA Locking Device to center position
- 1.75" X 48" Forged Stabber
- 2400 Lb. Capacity

Dual 340/345 Pin on Series orders Rock Bucket Bolt on Mounting Kit

Dual 205, 305, 255, 355, 310, 215, 260, 360, 275, 375 QT Loaders Rock Bucket Bolt on Mounting Kit

Dual 300/325 Pin on Series orders Rock Bucket Bolt on Mounting Kit

- Tine Diameter:1 3/4" Tine Spacing: 4"
- Length: 45" Height: 39" 
- Optional grapple fork available.
* Mounting kit is required.

- Tine Diameter:1 3/4" Tine Spacing: 4"
- Length: 45" Height: 39"
- Optional grapple fork available.
* Mounting kit is required.

Farmhand XL 590, 662, 740, 940, 1140, 1340

Farmhand LX 945 & 1145 QT to Uni-Tach Adapter

Ford New Holland 7109, 7209, 7309, 7210, 7310 & 7410 to UNI-TACH Universal Skid Steer Adapter

Ford New Holland 72 LA, 7311, 7411, 7511, 7312, 7412, 7413, 7414 QT Loaders Rock Bucket Bolt on Mounting Kit

Ford New Holland 72LA, 7311, 7411, 7511, 7312, 7313, 7412, 7413, 7414

Ford New Holland/Versatile Bi-Directional Loader Models 156, 256, 276, 9030, & 2360V to Uni-Tach

For most loader models and Bobcat Quick Tach (see Loader Bobcat Adapters).
- Standard 72"W x 54"H: two bale capacity
- 24" Bulkhead Extension: three bale capacity
- Forged steel tapered tines
- Attachment mounts built to OEM specifications
- Lift Capacity: 6,000 lbs.
- High tensile tubular steel frame
- Hydraulic 16" Push-Off models
- Tines available in 32", 39" and 48" lengths
- Anti-rollover spears
- Excellent see-through design
- Non-grapple fork design maximizes hay shed storage
- Please advise if you have 3' or 4' bales

Gehl 4625, 5625, 6625 Series QT Rock Bucket bolt on Mounting Kit

Gehl 4625, 5625 & 6625 to UNI-TACH Universal Skid Steer Adapter

- Tine Diameter:1 1/2"
- Tine Spacing: 3"
- Length: 42"
- Height: 26"
- Optional grapple fork available.
* Mounting kit is required.

- Tine Diameter:1 1/2"
- Tine Spacing: 3"
- Length: 42"
- Height: 26"
- Optional grapple fork available.
* Mounting kit is required.

- Tine Diameter:1 1/2"
- Tine Spacing: 3"
- Length: 42"
- Height: 26"
- Optional grapple fork available.
* Mounting kit is required.

John Deere 175 Pin On Loaders Rock Bucket Bolt on Mounting Kit

John Deere 280 Rock Bucket Bolt on Mounting Kit

John Deere 600/700 Pin On Series Rock Bucket Bolt on Mounting Kit

John Deere 840 Rock Bucket Bolt on Mounting Kit

JD 3200-3400 Telehandler Series Rock Bucket Bolt on Mounting Kit

JD 3800 Telehandler Series Rock Bucket Bolt on Mounting Kit

JD 145, 146, 148 & 158 pin on Series Loaders to Uni-Tach Adapter

JD 240, 245, 260 & 265 Quik-Tach Series Loaders to Uni-Tach Adapter

JD 200x. 200cx, 300x, 300cx, 400, 400x, 500, 500x QT series Loaders

JD 640, 740, 741 Quik-Tach Series Loaders to Uni-Tach adapter

JD 48, 58 Single Cylinder Pin On Series Loaders to Uni-Tach Adapter
(Must specify Top pin size)

JD 168 to UNI-TACH Universal Skid Steer Adapter

- KD 5000, 5500, 6400, 7400 Loaders

- Koyker 180, 185, 190, 195, 210, 220, 235, 245 with Quik-Tach System

Kubota L35 Rock Bucket Bolt on Mounting Kit

Kubota L1001, L1002 QT Loaders Rock Bucket Bolt on Mounting Kit

Kubota L35 Pin-On Series Loader to UNI-TACH Universal Skid Steer Adapter

Kubota L1001 & L1002 Quick-Tach Series Loader to UNI-TACH Universal Skid Steer Adapter

- Tine Diameter:1 1/8"
- Tine Spacing: 1 3/4"
- Length: 39"
- Height: 26" 
* Mounting kit is required.

Heavy equipment could cause permanent damage to delicate, natural woodlands. Now, you can harvest logs gently and efficiently with a 3-point tractor, with minimal disturbance of the environment. Safe, inexpensive MDS log-hitches provide a high-carry skid for clean logs and reduced wood-lot damage.

Massey-Ferguson 1040, 1060 Old Style QT with 1" Hook Up Pins Rock Bucket Bolt on Mounting Kit

Massey-Ferguson 1050 Old Style QT with 1" Hook up Pins Rock Bucket Bolt on Mounting Kit

Massey-Ferguson 1050 Old Style QT with 1 1/4" hook Up Pins Rock Bucket Bolt on Mounting Kit

McCormik "L" Series QT Series Loaders

For most loader models and Bobcat Quick Tach (see Loader Bobcat Adapters).
- 3-Point models also available, CAT 2 & 3N
- Lift capacity: 5,500 lbs
- Solid pallet fork tines - standard taper on tine with rounded tip
- Tine specs: 1-1/ 2" thick x 4" wide x 48" Long
- Tine width adjustable 8" TO 55" on zinc plated 1-5/8" slider rails
- Attachment mounts built to OEM Specifications
- See-through Roll Guard is standard on all models
- Bulkhead height with roll guard: 35" TO 38"
- Please specify the year and model of your loader in the comments area of the order form.
- You will be advised of shipping charges before processing.

For most loader models and Bobcat Quick Tach (see Loader Bobcat Adapters).
- 3-Point Models Available, CAT 2 & 3N
- Lift capacity: Fork 5,500 lbs; Stabber 4000 lbs
- Solid pallet fork tines - standard 3-Point Models Available, CAT 2 & 3N
- Lift capacity: Fork 5,500 lbs; Stabber 4000 lbs,taper on tine with rounded tip
- Tine Specs: 1-1/ 2" thick x 4" wide x 48" Long
- Tine width adjustable 8" TO 55" on zinc plated 1-5/8" slider rails
- Attachment mounts built to OEM Specifications
- See-through Roll Guard is standard on all models
- Bulkhead height with roll guard: 35" TO 38"

- Lift capacity: Fork 5,500 lbs; Boom 4,000 lbs.
- Tine specs: 1-1/ 2" thick x 4" wide x 48" Long
- Tines Width Adjustable on Zinc plated 1-5/8" slider rails
- Boom adjust to 5 different lengths in 8" increments.
- Bulkheads 1/4" high-tensile steel tubing: height with roll guard: 35" TO 38"

- Auger offset for operator visibility
- Self-Centering 4-Way Auger Swivel
- Bulkheads available for most loaders
- Heavy Duty Frames Resist Twisting
- Saddle Bracket to support auger during transport
- Fits Quik-Tach Skid Steer units 1995 and newer
- Weights vary; 120-300 lbs.

Universal receiver for use with Uni-Tach.
75 lbs

- Tine Diameter:1 1/4" Tine Spacing: 2 1/2"
- Length: 42" Height: 26"
- Optional grapple fork available.
* Mounting kit is required.

- Tine Diameter:1 1/4" Tine Spacing: 2 1/2"
- Length: 42" Height: 26"
- Optional grapple fork available.
* Mounting kit is required.

Miller PL2X, PL2 JR, PL2, GP25, GL25 QT Rock Bucket Bolt on Mounting Kit

Miller G15, G20 QT Rock Bucket bolt on Mounting Kit

Miller PL2X, PL2 JR, PL2, GP25, GL25 Quik Tach Series Loaders

- Allied 2495, 2595, 2596, 2795 & 2895 QT Loader to Uni-Tach Adapter
- Buhler 2895 & 3895

Case IH LX 192 Series Loaders to UNI-TACH Universal Skid Steer Adapter

New Holland 32LA, 33LA, 52LA Series and 46LB, 52LB Series with Universal Skid Steer Hook-up Rock Bucket Bolt on Mounting Kit MDS-3620

New Holland TV 140, 145 Bi-Directional Tractors with Model 82LB Loaders Rock Bucket bolt on Mounting Kit

New Holland 92LB Rock Bucket Bolt on Mounting Kit

New Holland L553, L554, L555, L775, L779, L781, L783, L784, L785, L865 to Uni-Tach Universal Skid Steer Adapter

- 1-1/4" x 4" Select length to the right
- 400 lbs; 4000 lb Lift Capacity
- Industry standard Class 2-ITA tines slide on horizontal rail with notches for pre-set widths
- Heavy duty frame to handle both 4,000 or 5,200 lb. load capacity
- Full-length heavy duty roll guard, slat style for better visibility
- Load-retaining D-Ring in center of roll guard
- You will be contacted with shipping before your order is processed.

- 1.5" inch thick tines
- Fits all models of skid steer loaders 1995 and newer
- Heavy duty mounting plate with reinforced receiver lip, tapered for easy hookup
- Heavy duty frame to handle both 4,000 or 5,200 lb. load capacity

Skid Steer Dog Ear Hook-Up (NH L553, L554, L555, L775, L779, L781, L783, L784, L785, L865) Rock Bucket Mounting Kit (43" Wide Hook-Up)

John Deere 145 & 146 Loader Models with 10" centers (1" top pin-1 1/8" bottom pin)
(1" top pin - 1 1/8" bottom pin)
Weight: 123 lbs

- For John Deere 175 Loaders
- Weight: 125 lbs

- Handles 4' to 6' dia. bales
- Lift Capacity 2200 lbs.
- Handles bales from any direction, side or end
- Arms open simultaneously
- Anti-rollover guard
- Hydraulic cylinder & OEM loader mounting brackets standard
- Loader arm design does not puncture plastic wrap
- Extra wide Sur-Grip arms grasp firmly but gently
- Ideal for tub grinding, stacking, loading round bales
- Recommended for wide front-end tractors only
Please specify the year and model of your loader in the comments area of the order form.You will be advised of shipping charges before processing.

- Converts your tractor loader to a Skid Steer
- Easy to Install, No modifications necessary
- Plated pins and latch mechanism
- Fits OEM Loader hookups

Westendorf 20 Series Loader Rock Bucket Bolt on Mounting Kit

Westendorf 70 Series Loader Rock Bucket Bolt on Mounting Kit

Westendorf 40 Series Loaders to Uni-Tach Adapter