- Air Flow: 1,530 CFM; Heat Rise 150 deg. F.
- 1.56 GPH; 17.2 Gallon Tank; 110V, 60 Hz
- Pneumatic Tires, Fuel Gauge, Preheated fuel filter
- Four loop combustion chamber.
- Ducting: can use three 6"x15"; two 12"x12" or one 14"
- Duct adapter required.
- Optional: thermostat, lift kit, tune-up kit, ducts
- 20" x 37" x 47"; Weight: 176 lbs
- Heat Output: 219,000 BTU

700K BTU Jumbo Indirect Fired Oil Heater  
- OIL Fueled (Diesel, Kerosene, Fuel Oil)
- Two-stage Startup means no cold air delivered
- Heat Output: 700K BTU
- 7,420 CFM
- Standard w/ pneumatic tires, pre heated oil filter
- 21 AMP Draw at Startup;
- 25 AMP Circuit Recommended
- Burner not attached. Some assembly required.

 

Jumbo 700 Heater Accessories

Cotton Canvas Heater Ducting
The material of choice for cold weather helicopter users, because canvas is the most durable.
Dragging ducting across ice is really hard on ducting. Canvas holds up better than PVC.
- Standard Duct for the EC Series heaters.
- Also works with Jumbo Models.
- Metal J-Lock collars allow quick assembly and knockdown.
- Extra-durable cotton canvas ducting.
- For high abrasive application.

EnviroDuct PVC Ducting 20" x 25'

- PVC/ Polyester VentaTex® 13oz/sq yd Fabric
- Steel-wire helix/ with heavy duty wear strips,
- Metal J-Lock collars available
- Temperature range: -20 to 200 degrees F; -29 to 93 degrees C
- Standard Pitch: 6" dia.- 3" pitch; 8", 11"- 4" pitch.
- Expanded Pitch: Available on 12" diameter & larger

For EC100 heaters to accept ducting. This collar adapts the EC100 series heater to accept J-Lock, Pin-Lock or Belted Cuff 12" Ducting.
With Metal J-Lock collars unless specified otherwise.

Converts one 12" to connect to three 6" ducts; Uses CAN6X15 Canvas Ducting, 6" x 15'

- Converts 12" to two 12" ducts
- Uses Canvas or PVC Ducting
- Fabricated Sheet Metal, painted or powder coated.
- With Metal J-Lock collars unless specified otherwise

On-Board Fuel Tank for Jumbo 700
- Made-to-order option
- Tank sits below unit with wheels mounted to the tank.
- Allow two days for assembly.
- Dimensions: 28x56x12
- Weight: 80 lbs.

On-Board Fuel Tank for Jumbo 400
Made-to-order option
- Tank sits below unit with wheels mounted to the tank.
- Allow two days for assembly.
- Dimensions: 28x56x12
- Weight: 80 lbs.

 

- PHOEN400 Two Way Duct Adapter - 16"
- Splitter for EC400 heaters to accept two 16" x 15' diameter ducting with Belted Cuff connectors.

PHOEN400 External Tank Kit

External fuel tank for Cantherm Phoen400 Indirect Fired Heater.

Plugs into heater, regulates on/off feature
- Adjustable
- 30 Quality cord

- For top of Jumbo 700 Heater
- Order with Jumbo 700 Heater and it will come installed
- Weight 12 lbs.